Abstract:Uncertainty in structural loading during launch is a significant concern in the development of spacecraft and launch vehicles. Small variations in launch vehicle and payload mode shapes and their interaction can result in significant variation in system loads. In many cases involving large aerospace systems, it is difficult, not economical, or impossible to perform a system modal test. However, it is still vital to obtain test results that can be compared with analytical predictions to validate models. Instead, the “Building Block Approach” is used in which system components are tested individually. Component models are correlated and updated to agree as best they can with test results. The Space Launch System consists of a number of components that are assembled into a launch vehicle. Finite element models of the components are developed, reduced to Hurty/Craig-Bampton models, and assembled to represent different phases of flight. The only opportunity to obtain modal test data from an assembled Space Launch System will be during the Integrated Modal Test. There is always uncertainty in every model, which flows into uncertainty in predicted system results. Uncertainty quantification is used to determine statistical bounds on prediction accuracy based on model uncertainty. For the Space Launch System, model uncertainty is at the Hurty/Craig-Bampton component level. Uncertainty in the Hurty/Craig-Bampton components is quantified using the hybrid parametric variation approach, which combines parametric and nonparametric uncertainties. Uncertainty in model form is one of the biggest contributors to uncertainty in complex built-up structures. This type of uncertainty cannot be represented by variations in finite element model input parameters and thus cannot be included in a parametric approach. However, model-form uncertainty can be modeled using a nonparametric approach based on the random matrix theory. The hybrid parametric variation method requires the selection of dispersion values for the Hurty/Craig-Bampton fixed-interface eigenvalues and the Hurty/Craig-Bampton stiffness matrices. Component test/analysis frequency error is used to identify fixed-interface eigenvalue dispersions, while test/analysis cross-orthogonality is used to identify stiffness dispersion values. The hybrid parametric variation uncertainty quantification approach is applied to the Space Launch System Integrated Modal Test configuration. Monte Carlo analysis is performed, and statistics are determined for modal correlation metrics, frequency response from Integrated Modal Test shakers to selected accelerometers, as well as other metrics for determining how well target modes are excited and identified. If the predicted uncertainty envelopes future Integrated Modal Test results, then there will be increased confidence in the utility of the component-based hybrid parametric variation uncertainty quantification approach.

Model based IVHM system for the solid rocket booster

Computational Simulation of Reentry Flows over Hypersonic Vehicles Using Nonlinear Coupled Constitutive Relations

Numerical Simulation of Sloshing in the Propellant Tank of Reusable Rocket Vehicle Using Meshfree Method

Numerical Simulation of Hypersonic Reaction Flows with Nonlinear Coupled Constitutive Relations

Robust Sensor Optimization for Liquid Propellant Rocket Engine Model Parameter Estimation

SLS Integrated Modal Test Uncertainty Quantification Using the Hybrid Parametric Variation Method

Finite-Element Modeling and Frequency-Domain Analysis of Liquid-Propulsion Launch Vehicle

Advances in Space Launch System Booster Separation Computational Fluid Dynamics

A computational model for the design of a nitrous oxide--paraffin wax hybrid rocket engine

Pseudo-Two-Dimensional Modeling and Validation of a Hybrid Rocket Combustion Chamber

Turbopump Parametric Modelling and Reliability Assessment for Reusable Rocket Engine Applications

Multiphysics Modeling for Combustion Instability in Paraffin-Fueled Hybrid Rocket Engines

Dynamic Simulation Model of Liquid-Propellant Packet Scheme Launch Vehicles

Numerical Investigation on the Mechanism of Solid Rocket Motor Instability Induced by Differences between On-Ground and In-Flight Conditions

Numerical investigation of high-pressure combustion in rocket engines using Flamelet/Progress-variable models

Machine-Learning and Physics-Based Tool for Anomaly Identification in Propulsion Systems

Dynamic systems modeling of the spallation neutron source cryogenic moderator system to optimize transient control and prepare for power upgrades

Simulation and Application of a New Multiphase Flow Ablation Test System for Thermal Protection Materials Based on Liquid Rocket Engine

Liquid Rocket Engine Performance Characterization Using Computational Modeling: Preliminary Analysis and Validation

Modeling and Analysis of Fluid-Solid Coupling Heat Transfer and Fluid Flow in Transonic Nozzle

Numerical analysis on combustion instabilities in end-burning-grain solid rocket motors utilizing pressure-coupled response functions