In situ investigation on pore-water pressure response during vibratory pile driving with high frequency

Jingyuan Zhan,Jinjian Chen,Weidong Wang,Mingguang Li,Wang, Weidong
DOI: https://doi.org/10.1007/s11440-024-02251-w
2024-03-25
Acta Geotechnica
Abstract:The pore-water pressure response during vibratory pile driving considerably affects the piling process and environment. With the applications of high-frequency technology in upgrading the vibratory hammer, the pore-water pressure variation under high-frequency driving conditions becomes more complicated. However, there is a lack of relevant detailed investigations. This paper conducts an in situ experiment with a comprehensive monitoring and measuring system to examine the pore-water pressure response in the complete process of high-frequency vibratory pile driving. The real-time variations of pore-water pressure at the pile-soil interface and surrounding soil are evaluated, respectively. Furthermore, the excess pore-water pressure distributions and evolutions are analyzed in-depth. Then, the mechanism analysis and affected zone range determination are performed based on the development of excess pore-water pressure. The analysis results indicate that vibratory pile driving with high frequency leads to an increase of excess pore-water pressure and consequently soil quasi-liquefaction at the pile-soil interface. The apparent accumulation of excess pore-water pressure concentrates in the local range of soil around the pile tip and decays rapidly in the radial direction. According to the field observations, the increase of the pore-water pressure in the surrounding soil is attributed to the frictional penetration of the pile tip and the frictional vibration of the pile shaft. Furthermore, the maximum radial radii of the fully and partially quasi-liquefied zones are approximately 2.9 and 3.6 times the pile diameter, respectively.
engineering, geological
What problem does this paper attempt to address?