Abstract:The construction industry is a challenging field for the application of robots. In particular, bridge construction, which involves many tasks at great heights, makes it difficult to implement robots. To construct a bridge, it is necessary to build numerous piers that can support the bridge deck. Pier construction involves a series of tasks including rebar connection, formwork installation, concrete pouring, formwork dismantling, and formwork reinstallation. These activities require working at heights, presenting a significant risk of falls. If bridge construction could be performed remotely using robots instead of relying on human labor, it would greatly contribute to the safety of bridge construction. This paper proposes a multi-robot system capable of remote operation and automation for rebar structure connection, concrete pouring, and concrete vibrating tasks in pier construction. The proposed multi-robot system for pier construction is composed of three robot systems. Each robot system consists of a robot arm mounted on a mobile robot that can move along rails. And to apply the proposed system to a construction site, it is essential to implement a compliance control algorithm that adapts to external forces. In this paper, we propose an admittance control that takes into account the weight of the tool for the compliance control of the proposed robot, which performs tasks by switching between various construction tools of different weights. Furthermore, we propose a synchronization control method for the multi-robot system to connect reinforcing structures. We validated the proposed algorithm through simulation. Furthermore, we developed a prototype of the proposed system to verify the feasibility of the suggested hardware design and control.

What problem does this paper attempt to address?

This paper attempts to solve an important problem in bridge construction, namely the high - risk and low - efficiency problems existing in the pier construction process. Specifically, pier construction usually requires a series of tasks such as steel bar connection, formwork installation, and concrete pouring at high altitudes. These tasks not only have a dangerous working environment and are prone to falling accidents, but also are highly dependent on manual labor, resulting in a long construction cycle, high cost, and low efficiency. To solve these problems, the paper proposes a multi - robot system that can remotely operate and automatically execute key tasks in pier construction, such as steel structure connection, concrete pouring, and concrete vibration. By introducing this multi - robot system, the safety and efficiency of pier construction can be significantly improved, the dependence on manpower can be reduced, and the construction risk can be lowered. The main contributions of the paper are as follows: 1. **Development of multi - robot system**: A multi - robot system composed of three robot systems is designed. Each system contains a robotic arm installed on a mobile platform and can move on the track to perform different construction tasks. 2. **Compliant control algorithm**: An impedance control algorithm considering the tool weight is proposed to ensure that the robot can still accurately adapt to external forces when switching between tools of different weights. 3. **Synchronous control method**: A synchronous control method is developed to enable the three robot systems to work together when grasping and adjusting the steel bar mesh, thereby achieving more efficient operations. 4. **Prototype verification**: The effectiveness of the proposed system and control algorithms is verified through simulation and experiments, proving its feasibility and reliability in actual construction. In conclusion, this paper aims to improve the safety and efficiency of pier construction through the development and application of multi - robot systems and promote the technological progress of the construction industry.

Development of a Multi-Robot System for Pier Construction

Remotely Collaborative Pseudo-Dynamic Testing Of A Multi-Span Bridge

Dual-Arm Construction Robot for Automatic Fixation of Structural Parts to Concrete Surfaces in Narrow Environments

Physically distributed multi-robot coordination and collaboration in construction

Experimental validation of a constrained control architecture for a multi-robot bricklayer system

Cooperative Modular Manipulation with Numerous Cable-Driven Robots for Assistive Construction and Gap Crossing

RAS: a robotic assembly system for steel structure erection and assembly

A Practical Climbing Robot for Steel Bridge Inspection

Control of a multirobot bricklaying system

Development of a Steel Bridge Climbing Robot

A Climbing Robot for Steel Bridge Inspection

Development of a Three-Mobile-Robot System for Cooperative Transportation

Enhancing safety in human–robot collaboration through immersive technology: a framework for panel framing task in industrialized construction

Real-time simulation of construction workers using combined human body and hand tracking for robotic construction worker system

Development of an autonomous bridge deck inspection robotic system

Coordinating robotized construction using advanced robotic simulation: The case of collaborative brick wall assembly

Automated robotic monitoring and inspection of steel structures and bridges

Control Framework for a Hybrid-steel Bridge Inspection Robot

A Cable-driven Parallel Robot for High-rack Logistics Automation

Developing a Robotic System for Construction Truck Crane

A Tethered Façade Cleaning Robot Based on a Dual Rope Windlass Climbing Mechanism: Design and Experiments