Redundant Configuration Method of MEMS Sensors for Bottom Hole Assembly Attitude Measurement

Yu Zheng,Lu Wang,Fan Zhang,Zulei Yang,Yuanbiao Hu

DOI: https://doi.org/10.3390/mi15060804

IF: 3.4

2024-06-20

Micromachines

Abstract:Micro-electro-mechanical systems inertial measurement units (MEMS-IMUs) are increasingly being employed for measuring the attitude of bottom hole assemblies (BHAs). However, the reliability and measurement precision of a single MEMS-IMU may not meet drilling's stringent needs. Redundant MEMS-IMU systems can effectively enhance the reliability and precision. This paper proposes a redundant configuration method for MEMS sensors tailored to BHA attitude measurement. Firstly, based on reliability theory and a cost-benefit analysis, considering factors such as cost, size, and reliability, the optimal number of sensors in the redundant system was determined to be six. Considering the structural characteristics of the BHA, a hollow hexagonal prism-shaped redundant configuration scheme was proposed, ensuring the circulation of drilling fluid within the drill pipe. Next, by employing Kalman filtering to integrate the output data from the six sensors, a virtual IMU (VIMU) was formed. Finally, experimental verification was carried out. The results confirmed that, after redundancy implementation, the velocity random walk of the accelerometer decreased by an average of 58% compared to a single MEMS-IMU, and bias instability was reduced by an average of 54%. The angular random walk of the gyroscope decreased by an average of 58%, and bias instability was reduced by an average of 37%. This research provides a theoretical foundation for enhancing the precision and reliability of BHA attitude measurements.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the insufficient reliability and measurement accuracy of a single Micro - Electro - Mechanical System Inertial Measurement Unit (MEMS - IMU) in measuring the Bottom Hole Assembly (BHA) attitude during drilling operations. Specifically, the paper improves the reliability and accuracy of MEMS sensors in BHA attitude measurement by designing a redundant configuration method.

### Background and Problems
1. **Insufficient Reliability and Accuracy**: In the complex and challenging underground working environment, the reliability and measurement accuracy of a single MEMS - IMU often cannot meet the operational requirements.
2. **Necessity of Redundant System**: By implementing a redundant system composed of multiple MEMS sensors, the reliability and measurement accuracy can be effectively improved.

### Solutions
1. **Design of Redundant Configuration Scheme**:
- Based on reliability theory and cost - benefit analysis, considering factors such as cost, size, and reliability, the optimal number of sensors in the redundant system is determined to be 6.
- According to the structural characteristics of the BHA, a hollow hexagonal prism - shaped redundant configuration scheme is proposed to ensure the flow of drilling fluid in the drill pipe.
2. **Data Fusion Algorithm**:
- By using the Kalman filter to integrate the output data of the six sensors, a virtual IMU (VIMU) is formed.
3. **Experimental Verification**:
- The experimental results show that after the redundant configuration, the velocity random walk of the accelerometer is reduced by an average of 58%, and the bias instability is reduced by an average of 54%; the angle random walk of the gyroscope is reduced by an average of 58%, and the bias instability is reduced by an average of 37%.

### Main Contributions
- Provide the theoretical basis for enhancing the accuracy and reliability of BHA attitude measurement.
- Design a redundant configuration scheme of MEMS sensors suitable for drilling tools and optimize the data fusion algorithm.

### Key Formulas
- **Definition of Reliability**:
\[
R(t)=e^{-\lambda t}
\]
where \(\lambda\) is the failure rate and \(t\) is the time.
- **Reliability of Redundant System**:
\[
\theta = 1-(1 - R_1)^n
\]
where \(R_1\) is the reliability of a single sensor and \(n\) is the number of sensors.
- **Performance Constraint Index \(P\)**:
\[
P=\frac{\int_0^{\infty}\theta(t)e^{-\lambda t}dt}{\int_0^{\infty}f(n)e^{-\lambda t}dt}
\]
where \(\theta(t)\) is the reliability of the redundant system and \(f(n)\) is the cost function.

### Conclusion
The paper designs and experimentally verifies a redundant configuration scheme of MEMS sensors suitable for drilling tools, which significantly improves the reliability and accuracy of BHA attitude measurement.