The mechanism of V-modification in Li2CoSiO4 cathode material for Li-ion batteries: A combined first-principles and experimental study

Liyuan Huai,Wenqiang Du,Zhifeng Zhang,Xianhui Zhang,Zhiyong Zhang,Zhenlian Chen,Jinlei Wu,Deyu Wang,Jun Li
DOI: https://doi.org/10.1016/j.electacta.2020.136564
IF: 6.6
2020-09-01
Electrochimica Acta
Abstract:<p>Lithium cobalt silicate Li<sub>2</sub>CoSiO<sub>4</sub> (LCSO) is a unique cathode candidate that has the potential to simultaneously achieve both high energy-density and high safety. However, it was plagued with poor electrochemical performances owing to limited effective modification of its polymorphic and electronic structures. Functional groups modification has long been proven to be effective approaches for enhancing chemical/physical properties that are highly desirable for energy storage systems. Here the multivalent vanadium (V) doping to modify the tetrahedral functional groups in LCSO was proposed. Based on density function theory calculations and experimental analysis, V prefers to be doped at Si site, which improves both the electronic and ionic conductivities of LCSO. First-principles modeling with Madelung matrix analysis reveals that the V<sub>3d</sub>-O<sub>2p</sub> orbital overlaps largely account for the reduction of the electronic energy gap by ∼1.40 eV and the lithium migration energy barrier by ∼0.20 eV. Li<sub>2</sub>CoV<sub>0.1</sub>Si<sub>0.9</sub>O<sub>4</sub>/C shows the highest initial discharge capacity of 220.1 mAh g<sup>-1</sup>, compared to only 135.0 mAh g<sup>-1</sup> for Li<sub>2</sub>CoSiO<sub>4</sub>/C. The discharge rate and cycling stability are also improved. Electrochemical impedance spectroscopy indicates that charge transfer resistance and Li diffusion resistance are reduced by 22.8% and 53.2%, respectively, after V-modification.</p>
electrochemistry
What problem does this paper attempt to address?
The paper attempts to address the issue of improving the electrochemical performance of the lithium-ion battery cathode material Li₂CoSiO₄ (LCSO) through vanadium (V) doping. LCSO has the potential for high energy density and high safety, but its electrochemical performance has been poor due to limited effective modification of its polymorphism and electronic structure. To enhance the practical value of this material, researchers proposed multivalent vanadium doping to improve the tetrahedral functional groups in LCSO. Through first-principles calculations and experimental analysis, it was found that vanadium tends to dope at the silicon sites, which can improve the electronic and ionic conductivity of LCSO. Specifically, the doped Li₂CoV₀.₁Si₀.₉O₄/C exhibited a higher initial discharge capacity (220.1 mAh/g), a significant improvement compared to the undoped LCSO (135.0 mAh/g), and its discharge rate and cycling stability were also improved. Additionally, electrochemical impedance spectroscopy indicated that the charge transfer resistance and lithium diffusion resistance decreased by 22.8% and 53.2%, respectively, validating the effectiveness of this design. Overall, this study provides a method to improve LCSO as a high-performance lithium-ion battery cathode material and may offer new solutions for other materials and electrolytes that require enhanced conductivity.