Approaching “stainless magnesium” by Ca micro-alloying

Min Deng,Linqian Wang,Daniel Höche,Sviatlana V. Lamaka,Cheng Wang,Darya Snihirova,Yiming Jin,Yuhui Zhang,Mikhail L. Zheludkevich
DOI: https://doi.org/10.1039/d0mh01380c
IF: 13.3
2021-01-01
Materials Horizons
Abstract:Highly corrosion-resistant Mg is readily achievable by Ca micro-alloying, making “stainless Mg” possible. The designed lean Mg–Ca holds great promise in diverse applications, particularly biodegradable medical implants and aqueous batteries.
materials science, multidisciplinary,chemistry
What problem does this paper attempt to address?
This paper attempts to address the severe corrosion problem of magnesium (Mg) and its alloys in aqueous environments. Magnesium metal is widely regarded as an attractive lightweight material due to its low density, high strength-to-weight ratio, and mechanical properties similar to human bone, making it suitable for aerospace and automotive industries, as well as having potential applications in medical implants and water-based batteries. However, its poor corrosion resistance limits the widespread application of magnesium materials in these fields. Previously, no magnesium-based material has been found to significantly reduce the corrosion rate below that of ultra-high purity magnesium (UHP-Mg), i.e., a corrosion rate in 3.5 wt% NaCl solution of less than 0.25 mm/y. The main contribution of the paper is the first achievement of a highly corrosion-resistant magnesium alloy through trace calcium (Ca) alloying. This novel Mg-Ca alloy exhibits a corrosion rate in 3.5 wt% NaCl solution of less than 0.1 mm/y, which is far lower than all previously reported magnesium alloys. This breakthrough is attributed to Ca microalloying, which inhibits the cathodic water reduction kinetics, stabilizes impurities, and forms a protective surface film. Additionally, the paper explores the inhibitory effect of Ca alloying on the oxygen reduction reaction (ORR) and the stabilizing effect on harmful impurities (such as iron and silicon), thereby further enhancing the uniformity and corrosion resistance of the magnesium alloy. Therefore, this low-cost and environmentally friendly method provides new possibilities for developing high-performance magnesium-based materials.