Abstract:Highlights • Superplasticity of fine-grained Mg-10Li alloy was studied. • Severe plastic deformation was used to achieve the fine grains. • Its deformation mechanisms for superplastic flow were analyzed. • Deformation mechanism maps were constructed in 2D and 3D. The superplastic behavior and associated deformation mechanisms of a fine-grained Mg-10.1 Li-0.8Al-0.6Zn alloy (LAZ1011) with a grain size of 3.2 μm, primarily composed of the BCC β phase and a small amount of the HCP α phase, were examined in a temperature range of 473 K to 623 K. The microstructural refinement of this alloy was achieved by employing high-ratio differential speed rolling. The best superplasticity was achieved at 523 K and at strain rates of 10 −4 -5 × 10 −4 s −1 , where tensile elongations of 550–600% were obtained. During the heating and holding stage of the tensile samples prior to tensile loading, a significant increase in grain size was observed at temperatures above 573 K. Therefore, it was important to consider this effect when analyzing and understanding the superplastic deformation behavior and mechanisms. In the investigated strain rate range, the superplastic flow at low strain rates was governed by lattice diffusion-controlled grain boundary sliding, while at high strain rates, lattice diffusion-controlled dislocation climb creep was the rate-controlling deformation mechanism. It was concluded that solute drag creep is unlikely to occur. During the late stages of deformation at 523 K, it was observed that grain boundary sliding led to the agglomeration of the α phase, resulting in significant strain hardening. Deformation mechanism maps were constructed for β-Mg-Li alloys in the form of 2D and 3D formats as a function of strain rate, stress, temperature, and grain size, using the constitutive equations for various deformation mechanisms derived based on the data of the current tests.

The Contribution of Severe Plastic Deformation to Research on Superplasticity

Seventy-five years of superplasticity: historic developments and new opportunities

Principles of superplasticity in ultrafine-grained materials

Superfunctional Materials by Ultra-Severe Plastic Deformation

Towards a theory of superplasticity

New Insight for Mechanical Properties of Metals Processed by Severe Plastic Deformation

Recent Development of Superplasticity in Aluminum Alloys: A Review

Recent development in the mechanics of superplasticity and its applications

Seventy years of Hall-Petch, ninety years of superplasticity and a generalized approach to the effect of grain size on flow stress

On the Grain Size Dependent Working Hardening Behaviors of Severe Plastic Deformation Processed Metals

Effect of High-Temperature Severe Plastic Deformation on Microstructure and Mechanical Properties of IF Steel

SPD deformation of pearlitic, bainitic and martensitic steels

Nanostructural design of superstrong metallic materials by severe plastic deformation processing

Experimental and numerical analyses of 45 steel during three dimensional severe plastic deformation (3D-SPD)

Theory of finite strain superplasticity

Superplastic Behavior of a Metastable Β-Type Ti Alloy Governed by Grain Size: Microstructure Evolution and Underlying Deformation Mechanism

Deformation mechanism and microstructure evolution during superplastic deformation of friction stir processed CoCrFeNiMn high entropy alloy

Superplasticity of fine-grained Mg-10Li alloy prepared by severe plastic deformation and understanding its deformation mechanisms

Influence of severe plastic deformation on the precipitation hardening of a FeSiTi steel

Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation

Application of superplasticity in commercial magnesium alloy for fabrication of structural components