Abstract:Modification of titanium microstructure after propagation of a melting shock wave (SW) generated by a femtosecond laser pulse is investigated experimentally and analyzed using hydrodynamic and atomistic simulations. Scanning and transmission electron microscopy with analysis of microdiffraction is used to determine the microstructure of subsurface layers of pure titanium sample before and after modification. We found that two layers of modified titanium are formed beneath the surface. A top surface polycrystalline layer of nanoscale grains is formed from a shock-molten layer via rapid crystallization. In a deeper subsurface layer, where the shock-induced melting becomes impossible due attenuation of SW, recrystallization of plastically deformed titanium leads to grain size changes in comparison with intact titanium. Molecular dynamics simulation of single-crystal titanium reveals that the SW front continues to melt/liquefy even after its temperature drops below the melting curve $T_m(P)$. The enormous shear stress generated in a narrow SW front leads to collapse/amorphization of the crystal lattice and formation of a supercooled metastable melt. Such melt crystallizes in an unloading tail of SW until its temperature becomes higher than $T_m(P)$ due to a rapid pressure drop. Later, crystallization of the subsurface molten layer will continue after the heat leaves it. After the shear stress drops below $\sim 12$GPa within the SW front, such the cold mechanical melting ceases giving place to the shock-induced plastic deformations. The depth of modification is limited by SW attenuation to the Hugoniot elastic limit, and can reach several micrometers. The obtained results reveal the basic physical mechanisms of surface hardening of metals by ultrashort laser pulses.

Shock Compression of Molybdenum under Impact of Ultrashort Laser Pulses

Microstructure, Compressive Performance and Wear Resistance of Pure Molybdenum Additively Manufactured Via Laser Powder Bed Fusion

High-Speed Cobalt Film Fracture under the Action of Loads Created by a Picosecond Laser Pulse

Explosion/impact Response of Pure Molybdenum at Ultra-High Strain Rate and Large Strains

Shock and Release Temperatures in Molybdenum

Thermal Equation of State of Molybdenum Determined from in Situ Synchrotron X-ray Diffraction with Laser-Heated Diamond Anvil Cells

X-ray diffraction from shock-loaded polycrystals

Studying the Dynamics of Wave Processes of Compression and Expansion in Palladium under Picosecond Laser Action

Dynamics of supported ultrathin molybdenum films driven by strong short laser impact

In-situ Raman spectroscopy and high-speed photography of a shocked triaminotrinitrobenzene based explosive

Visualizing Shock Induced Thermo-Mechanical Change at Bi-Crystal Interface Using Laser Array Based Nano-Second Raman Spectral Imaging

Evidencing ultrafast dislocation motion

Numerical Analysis of Ultrashort Pulse Laser-Induced Thermomechanical Response of Germanium Thin Films

Shear relaxation behind the shock front in $\langle$110$\rangle$ Molybdenum - From the Atomic Scale to Continuous Dislocation Fields

Combined Continuum-Atomistic Modeling of Ultrashort-Pulsed Laser Irradiation of Silicon

Ultrafast Optical Response and Ablation Mechanisms of Molybdenum Disulfide under Intense Femtosecond Laser Irradiation

Shock-induced melting and crystallization in titanium irradiated by ultrashort laser pulse

Shock compression experiments using the DiPOLE 100-X laser on the high energy density instrument at the European x-ray free electron laser: Quantitative structural analysis of liquid Sn

Direct imaging of shock wave splitting in diamond at Mbar pressures

Experimental Study of Shock Waves Induced by High-Power Pulsed Laser in Az31b Magnesium Alloy

Investigation of W–B Behavior During Short Transient Events by Laser Irradiation