Abstract:During the operation of nuclear fusion reactors, plasma-facing components lining the reactor vessel are continually bombarded by plasma species. The penetration and subsequent trapping of these bombarding plasma ions has implications for component damage as well as in-vessel inventory. Accurately predicting the expected ion penetration depth profiles at a range of plasma ion and surface temperatures typical of fusion reactor operating conditions will inform the scrape-off layer design to limit particle radiation damage and tritium trapping in order to prolong the lifetime of the plasma-facing components and satisfy the DT fuel cycle requirements. By defining a statistical distribution for ion penetration depth and describing the evolution of its parameters across the fusion parameter space of interest, the expected ion deposition depth profiles can be calculated for any subset of ion and surface temperature ranges as needed. Molecular dynamics simulations were used to study the bombardment of beryllium lattices with surface temperatures of up to 1100K by 5eV–150eV deuterium and tritium ions, and the resulting ion penetration depths were investigated. The distributions of two penetration depth quantities, considered from the perspectives of lattice damage and hydrogen retention are defined and their distribution parameter dependence on surface and ion temperature is identified. The expected positive correlation between penetration depth and ion temperature is observed, where the non-linear relationship between these quantities indicates the expected form of the velocity dependence of nuclear stopping power at low bombardment energies. Isotope effects on the distributions are also investigated, with results suggesting that heavier ions have comparably lower mobility within the sample and will generally accumulate closer to the surface. A short study on ion deposition rates is also performed; a non-linear increase of deposition rate with increasing bombarding ion energy has been observed, and evidence of a weak positive surface temperature correlation has been noted.

Dynamic plasticity of beryllium in the inertial fuel fusion capsule regime

Beryllium capsule implosions at a case-to-capsule ratio of 3.7 on the National Ignition Facility

Validating methods for modeling composition gradients in planar shock experiments

The effect of crystal anisotropy and plastic response on the dynamic fracture of energetic materials

Ab initio calculated dynamic structure factor and optical properties of beryllium along the Hugoniot

Crystal Plasticity Finite Element Simulation of High-Rate Shock Deformation Process of <100> LiF

Effect of soft and hard x-rays on shock propagation, preheating, and ablation characteristics in pure and doped Be ablators

Exploring pressure-dependent inelastic deformation and failure in bonded granular composites: An energetic materials perspective

On the Properties of Plastic Ablators in Laser-Driven Material Dynamics Experiments

Microphysics of shock-grain interaction for inertial confinement fusion ablators in a fluid approach

Coupling of dynamic ductile damage and melting in shock-induced micro-spalling: Modeling and applications

High Pressure Suppression of Plasticity due to Over-Nucleation of Shear Strain

Investigation of W–B Behavior During Short Transient Events by Laser Irradiation

Dynamic deformation of Al under shock loading

Investigations into penetration depth profiles of hydrogenic species in beryllium plasma-facing components via molecular dynamics simulations

Shock-induced plastic deformation of nanopowder Ti during consolidation and spallation

Molecular simulation of the influence of interface faceting on the shock sensitivity of a model plastic bonded explosive

High shock release in ultrafast laser irradiated metals: Scenario for material ejection

Assessment of the literature about Be-W mixed material layer formation in the fusion reactor environment

Ultrafast Visualization of Incipient Plasticity in Dynamically Compressed Matter

The Shock-Induced Deformation and Spallation Failure of Bicrystal Copper with a Nanoscale Helium Bubble via Molecular Dynamics Simulations