Abstract:This research explores the behavior of Co40Fe40W10B10 when it is sputtered onto Si(100) substrates with a thickness (tf) ranging from 10 nm to 100 nm, and then altered by an annealing process at temperatures of 200 °C, 250 °C, 300 °C, and 350 °C, respectively. The crystal structure and grain size of Co40Fe40W10B10 films with different thicknesses and annealing temperatures are observed and estimated by an X-ray diffractometer pattern (XRD) and full-width at half maximum (FWHM). The XRD of annealing Co40Fe40W10B10 films at 200 °C exhibited an amorphous status due to insufficient heating drive force. Moreover, the thicknesses and annealing temperatures of body-centered cubic (BCC) CoFe (110) peaks were detected when annealing at 250 °C with thicknesses ranging from 80 nm to 100 nm, annealing at 300 °C with thicknesses ranging from 50 nm to 100 nm, and annealing at 350 °C with thicknesses ranging from 10 nm to 100 nm. The FWHM of CoFe (110) decreased and the grain size increased when the thickness and annealing temperature increased. The CoFe (110) peak revealed magnetocrystalline anisotropy, which was related to strong low-frequency alternative-current magnetic susceptibility (χac) and induced an increasing trend in saturation magnetization (Ms) as the thickness and annealing temperature increased. The contact angles of all Co40Fe40W10B10 films were less than 90°, indicating the hydrophilic nature of Co40Fe40W10B10 films. Furthermore, the surface energy of Co40Fe40W10B10 presented an increased trend as the thickness and annealing temperature increased. According to the results, the optimal conditions are a thickness of 100 nm and an annealing temperature of 350 °C, owing to high χac, large Ms, and strong adhesion; this indicates that annealing Co40Fe40W10B10 at 350 °C and with a thickness of 100 nm exhibits good thermal stability and can become a free or pinned layer in a magnetic tunneling junction (MTJ) application.

Characterization of half-metallic L2_1-phase Co_2FeSi full-Heusler alloy films formed by rapid thermal annealing

Effect of Co Addition on the Phase Structure and Magnetic Properties of Fe-Si-Al Alloys

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Annealing temperature dependence of magnetic properties in FeCo ordered alloy thin films fabricated using the nitrogen surfactant effect

Tunable magnetization relaxation of Fe_{2}Cr_{1-x}Co_{x}Si half-metallic Heusler alloys by band structure engineering

Single-Phase L1$_{0}$-Ordered High Entropy Thin Films with High Magnetic Anisotropy

Epitaxial Growth of a Full-Heusler Alloy Co$_{2}$FeSi on Silicon by Low-Temperature Molecular Beam Epitaxy

Half-Metallicity and Anisotropy Magnetoresistance Properties of Heusler Alloys Fe2co1-Xcrxsi

Annealing Effect on the Characteristics of Co40Fe40W10B10 Thin Films on Si(100) Substrate

Omparisons of Silicide Formation by Rapid Thermal Annealing and Conventional Furnace Annealing

Structural and magnetic properties of epitaxial films of CoIrMnAl equiatomic quaternary Heusler alloy designed from first-principles calculation

Synthesis and characterization of a novel Full-Heusler high entropy intermetallic compound-(FeCoNi) 2 TiSb

Epitaxial germanidation of full-Heusler Co2FeGe alloy thin films formed by rapid thermal annealing

Preferential Growth of Cosi2 in Co/Si Solid-State Interaction by Rapid Thermal Annealing

Growth of [001]-oriented polycrystalline Heusler alloy thin films using [001]-textured Ag buffer layer on thermally oxidized Si substrate for spintronics applications

Effects of Annealing Temperature on Magnetic Properties of Co Thin Films on Si (100)

Kinetics and Moving Species During Co2si Formation by Rapid Thermal Annealing

High Coercivity Feptsin Films With L1(0)-Fept Nanoparticles Embedded In A Si-Rich Matrix

Impact of Annealing on Magnetic Properties and Structure of Co40Fe40W20 Thin Films on Si(100) Substrate

Effect of Si addition on the magnetic properties of FeNi-based alloys with L10 phase through annealing amorphous precursor

Co2FeAl Heusler thin films grown on Si and MgO substrates: annealing temperature effect