Abstract:To exploit the potential of the reconfigurable intelligent surface (RIS) in supporting integrated sensing and communication (ISAC), this paper proposes a novel joint active and passive beamforming design for RIS-enabled ISAC system in consideration of the target size. First, the detection probability for target sensing is derived in closed-form based on the illumination power on an approximated scattering surface area of the target, and a new concept of ultimate detection resolution (UDR) is defined for the first time to measure the target detection capability. Then, an optimization problem is formulated to maximize the signal-to-noise ratio (SNR) at the user-equipment (UE) under a minimum detection probability constraint. To solve this non-convex problem, a novel alternative optimization approach is developed. In this approach, the solutions of the communication and sensing beamformers are obtained by our proposed bisection-search based method. The optimal receive combining vector is derived from an equivalent Rayleigh-quotient problem. To optimize the RIS phase shifts, the Charnes-Cooper transformation is conducted to cope with the fractional objective, and a novel convexification process is proposed to convexify the detection probability constraint with matrix operations and a real-valued first-order Taylor expansion. After the convexification, a successive convex approximation (SCA) based algorithm is designed to yield a suboptimal phase-shift solution. Finally, the overall optimization algorithm is built, followed by detailed analyses on its computational complexity, convergence behavior and problem feasibility condition. Extensive simulations are carried out to testify the analytical properties of the proposed beamforming design, and to reveal two important trade-offs, namely, communication vs. sensing trade-off and UDR vs. sensing-duration trade-off. In comparison with several existing benchmarks, our proposed approach is validated to be superior when detect- ng targets with practical sizes.

DOA Estimation Assisted by Reconfigurable Intelligent Surfaces

DNN-DANM: A High-Accuracy Two-Dimensional DOA Estimation Method Using Practical RIS

DOA Estimation Algorithm for Reconfigurable Intelligent Surface Co-Prime Linear Array Based on Multiple Signal Classification Approach

Joint Beamforming Design and 3D DoA Estimation for RIS-aided Communication System

A RIS-Based Vehicle DOA Estimation Method With Integrated Sensing and Communication System

Robust DOA Estimation Based on Dual Lawson Norm for RIS-Aided Wireless Communication Systems

Reconfigurable Intelligent Surface-Enabled Gridless DoA Estimation System for NLoS Scenarios

Robust Beamforming for RIS-Assisted Wireless Communications with Discrete Phase Shifts.

A RIS-Assisted MUSIC-Like Single-Channel Blind Direction-of-Arrival Estimation Method

Efficient Target Search and Detection in RIS-aided Integrated Sensing and Communications System

Reconfigurable Intelligent Sensing Surface aided Wireless Powered Communication Networks: A Sensing-Then-Reflecting Approach

Secure Beamforming Design for Reconfigurable Intelligent Surface Assisted Downlink Transmission

Reconfigurable Intelligent Surface Assisted Integrated Sensing, Communication and Computation Systems

Joint Beamforming Design for Active RIS-Aided THz ISAC Systems with Delay Alignment Modulation.

Distributed Reconfigurable Intelligent Surfaces Assisted Indoor Positioning

Toward Wireless Localization Using Multiple Reconfigurable Intelligent Surfaces

SNR/CRB-Constrained Joint Beamforming and Reflection Designs for RIS-ISAC Systems

Polarized Intelligent Reflecting Surface Aided 2D-DOA Estimation for NLoS Sources

Joint Active and Passive Beamforming Design for Reconfigurable Intelligent Surface Enabled Integrated Sensing and Communication

Reconfigurable Intelligent Surface-Enabled Array Radar for Interference Mitigation

An Adaptive Threshold Channel Estimation Approach for RIS-Assisted Wireless Communications