Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

Design, modeling, and control of underwater stiffness-enhanced flexible manipulator

In Situ Stiffness Manipulation Using Elegant Curved Origami

A Strong Underwater Soft Manipulator with Planarly-bundled Actuators and Accurate Position Control

Reconfigurable Transparent Variable‐Stiffness Soft Robot for Underwater Operations

An Underwater Robotic Manipulator with Soft Bladders and Compact Depth-Independent Actuation

Optimization design and experiment study on a water hydraulic flexible actuator integrating flexible inner skeleton and soft external skin used for underwater flexible gripper

Dynamic Analysis of an Underwater Cable-Driven Manipulator with a Fluid-Power Buoyancy Regulation System

Simplified Dynamical Model and Experimental Verification of an Underwater Hydraulic Soft Robotic Arm

Development of an Anthropomorphic Soft Manipulator with Rigid-Flexible Coupling for Underwater Adaptive Grasping

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

Tendon-Based Stiffening for a Pneumatically Actuated Soft Manipulator

Sliding Mode Control for Underwater Multi-DoF Hydraulic Manipulator

Flexible Bio-tensegrity Manipulator with Multi-degree of Freedom and Variable Structure

Design, Modelling and Implementation of a Foldable Pneumatic Soft Manipulator

Design, modeling and control of a pneumatically actuated manipulator inspired by biological continuum structures

A Modular, Tendon Driven Variable Stiffness Manipulator with Internal Routing for Improved Stability and Increased Payload Capacity

A Miniaturized Variable Stiffness Soft Manipulator with a Customizable LMPA Pattern

A Structure for Fast Stiffness-Variation and Omnidirectional-Steering Continuum Manipulator.

Design and development of a soft robotic manipulator

Soft Robotic Manipulators: Designs, Actuation, Stiffness Tuning, and Sensing