Abstract:The high energy demand and associated CO<sub>2</sub> emissions to produce Portland cement (OPC) create the need for alternative types of binders that can be produced in a more environmentally friendly manner. These alternative binders either have a reduced OPC content or can be produced entirely without the use of OPC clinker. To allow their widespread use also in reinforced concrete components, these binders must meet the same durability requirements as types of cement that have already been standardized. This requires a thorough characterization of the materials and, in addition, a verification of the applicability of the evaluation criteria known from the traditional binders. One of the most important factors influencing the transport processes in the material and therefore the durability, is the penetration resistance of the pore structure for aggressive species, such as chloride ions. One key parameter for describing the pore structure is the formation factor (FF), which is used for various applications to evaluate durability. It is determined based on the ratio of the electrical resistivity of the concrete and of the pore solution. In this study, mortars produced with different alternative binders are characterized in terms of their formation factor and pore size distribution. In addition, chloride migration coefficients determined by the Rapid Chloride Migration (RCM) test are related to the formation factor. The test program includes nine different alternative binders and two reference cements: In addition to a CEM I and CEM III/B, two calcined clays and a modified steel mill slag were investigated as supplementary cementitious materials (SCMs), as well as a calcium sulphoaluminate (CSA) cement and a calcium silicate hydrate (C-S-H) binder. Four materials belong to the group of alkali-activated mortars: Two geopolymers and two alkali-activated slags were investigated here. It is shown that both, the AC resistances and the conductivities of the pore solutions, differ greatly among the mortars investigated. The formation factor is a suitable parameter for a simplified estimation of the chloride penetration resistance of the investigated alternative binders, provided that realistic values of the pore solution conductivities are determined and used for the calculations.

Suitability of rapid chloride migration tests for determining the migration coefficient in mortars made from different novel binder types

Applicability of the formation factor for different alternative binder types investigated on mortars

On the Chloride Distribution in Concrete and Mortar Samples after an RCM Test

The Rapid Chloride Migration Test in Assessing the Chloride Penetration Resistance of Normal and Lightweight Concrete

Effect of Concrete Mixture Proportions on the Chloride Resistance

Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features

Correlating the Chloride Diffusion Coefficient and Pore Structure of Cement-Based Materials Using Modified Noncontact Electrical Resistivity Measurement

Testing the Bromide penetration resistance of concrete: substitution of NaCl by NaBr in Rapide Chloride/Bromide Migration Test (RCM/RBM)

Chloride Ingress Profiles and Binding Capacity of Mortar in Cyclic Drying-Wetting Salt Fog Environments

Five-phase Modelling for Effective Diffusion Coefficient of Chlorides in Recycled Concrete

Modification of Chloride Diffusion Coefficient of Concrete Based on the Electrical Conductivity of Pore Solution

Transfer Parameter Analysis of Chloride Ingress into Concrete Based on Long-Term Exposure Tests in China’s Coastal Region

Numerical Simulation of Chloride Penetration in Concrete in Rapid Chloride Migration Tests

A study of chloride binding capacity of concrete containing supplementary cementitious materials

RILEM TC 247-DTA round robin test: carbonation and chloride penetration testing of alkali-activated concretes

Experimental Research of Chloride Diffusion Coefficient in Concrete

Rapid Assessment of Sulfate Resistance in Mortar and Concrete

Chloride Diffusion Characteristics of the New Interface Transition Zone in Recycled Aggregate Concrete

Chloride corrosion resistance of cement mortar with recycled concrete powder modified by nano-silica

Durability parameters of three low-carbon concretes (low clinker, alkali-activated slag and supersulfated cement)

Exploration of PERMIT Test for Determining Permeability of Concrete