Abstract:Six XGBoost-based hybrid models for predicting TBM penetration rate are proposed.GWO, PSO, SSO, SCA, MVO and MFO can assist the hyper-parameters tuning of XGBoost.The prediction performance from high to low is PSO-XGB, MFO-XGB, GWO-XGB, MVO-XGB, SCA-XGB, SSO-XGB.The Mutual information method is applied to demonstrate the relative importance of each input indicator.A reliable and accurate prediction of the tunnel boring machine (TBM) performance can assist in minimizing the relevant risks of high capital costs and in scheduling tunneling projects. This research aims to develop six hybrid models of extreme gradient boosting (XGB) which are optimized by gray wolf optimization (GWO), particle swarm optimization (PSO), social spider optimization (SSO), sine cosine algorithm (SCA), multi verse optimization (MVO) and moth flame optimization (MFO), for estimation of the TBM penetration rate (PR). To do this, a comprehensive database with 1286 data samples was established where seven parameters including the rock quality designation, the rock mass rating, Brazilian tensile strength (BTS), rock mass weathering, the uniaxial compressive strength (UCS), revolution per minute and trust force per cutter (TFC), were set as inputs and TBM PR was selected as model output. Together with the mentioned six hybrid models, four single models i.e., artificial neural network, random forest regression, XGB and support vector regression were also built to estimate TBM PR for comparison purposes. These models were designed conducting several parametric studies on their most important parameters and then, their performance capacities were assessed through the use of root mean square error, coefficient of determination, mean absolute percentage error, and a10-index. Results of this study confirmed that the best predictive model of PR goes to the PSO-XGB technique with system error of (0.1453, and 0.1325), R2 of (0.951, and 0.951), mean absolute percentage error (4.0689, and 3.8115), and a10-index of (0.9348, and 0.9496) in training and testing phases, respectively. The developed hybrid PSO-XGB can be introduced as an accurate, powerful and applicable technique in the field of TBM performance prediction. By conducting sensitivity analysis, it was found that UCS, BTS and TFC have the deepest impacts on the TBM PR.<ol class="links-for-figure"><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S1674987120302231-ga1_lrg.jpg">Download : Download high-res image (323KB)</a></li><li><a class="anchor download-link u-font-sans" href="https://ars.els-cdn.com/content/image/1-s2.0-S1674987120302231-ga1.jpg">Download : Download full-size image</a></li></ol>

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to study the effects of storage temperature and time on the composition and functional characteristics of milk in the mixing tank, especially in the case of adding fresh milk twice a day. The research background is that after the expansion of the Irish dairy industry, the time for farms to store raw milk may be extended from 48 hours to 96 hours to improve processing efficiency. According to current EU regulations, when milk is collected daily, the milk produced on the farm must be cooled to at least 8°C; when the collection frequency is lower, it needs to be cooled to at least 6°C. However, many Irish milk processing plants require that the milk be cooled to 2 - 4°C within 2 to 3 hours after milking. For economic reasons, farmers may choose a higher storage temperature (for example, 6°C instead of 2°C) during a longer storage time, because the cooling cost is an important expense in farm operations. However, combined with a longer farm storage time, cooling at a higher temperature may affect the quality of milk and, in turn, the milk functionality in the processing facilities. Specifically, the research focuses on: - The effects of storage temperature (2°C, 4°C and 6°C) and storage time (0 - 96 hours) on the composition of milk in the mixing tank (such as fat, protein, lactose content, etc.). - The effects of these conditions on the functional characteristics of milk (such as thermal stability, titratable acidity, curd - forming ability, etc.). - The effects of different lactation stages (mid - and late - stage) on the above parameters. Through these studies, the author hopes to provide a scientific basis for the practical operation of extending the storage time of raw milk on the farm, and at the same time evaluate the impact of continuously adding fresh milk on the quality of milk during storage. This will not only help optimize the operating costs of the farm, but also ensure the quality and performance of milk during the processing.

Predicting TBM penetration rate in hard rock condition: A comparative study among six XGB-based metaheuristic techniques

Performance Prediction of Hard Rock TBM Based on Extreme Learning Machine

Performance Evaluation of TBM Using an Improved Load Prediction Model

Estimation of the TBM advance rate under hard rock conditions using XGBoost and Bayesian optimization

A hybrid GEP and WOA approach to estimate the optimal penetration rate of TBM in granitic rock mass

A novel gradient boosting regression tree technique optimized by improved sparrow search algorithm for predicting TBM penetration rate

Tree-Based Solution Frameworks for Predicting Tunnel Boring Machine Performance Using Rock Mass and Material Properties

An extreme gradient boosting technique to estimate TBM penetration rate and prediction platform

TBM Performance Prediction with Bayesian Optimization and Automated Machine Learning

Real-time hard-rock tunnel prediction model for rock mass classification using CatBoost integrated with Sequential Model-Based Optimization

Real-time prediction of tunnel face conditions using XGBoost Random Forest algorithm

A new hybrid grey wolf optimizer-feature weighted-multiple kernel-support vector regression technique to predict TBM performance

Prediction of geological conditions for a tunnel boring machine using big operational data

Application of various optimization techniques and comparison of their performances for predicting TBM penetration rate in rock mass

Supervised Machine Learning Techniques to the Prediction of Tunnel Boring Machine Penetration Rate

A comparative analysis of hybrid RF models for efficient lithology prediction in hard rock tunneling using TBM working parameters

TBM penetration rate prediction ensemble model based on full-scale linear cutting test

Tunnel Boring Machine Performance Prediction Using Supervised Learning Method and Swarm Intelligence Algorithm

Utilizing Partial Least Square and Support Vector Machine for TBM Penetration Rate Prediction in Hard Rock Conditions

Prediction of TBM operation parameters using machine learning models based on BPSO

An empirical method for estimating TBM penetration rate using tunnelling specific energy