Abstract:By employing an inorganic halide as a nanoscale inorganic barrier covering grain boundaries, key challenges in perovskite technology, including defect passivation and halide segregation are addressed. This barrier impressively enhanced the performance and stability of wide‐bandgap single‐junction perovskite solar cells, with a remarkable fill factor of 84.82% and open‐circuit voltage of 1.305 V, resulting in high efficiencies across various bandgaps: 21.54% for 1.70 eV, 20.45% for 1.77 eV, and 19.22% for 1.82 eV. In addition, monolithic all‐perovskite tandem solar cells with improved stability and efficiency are demonstrated. Wide‐bandgap (WBG) perovskite solar cells (PSCs) play a crucial role in advancing perovskite‐based tandem solar cells. In WBG perovskite films, grain boundary (GB) defects are the main contributors to open‐circuit voltage (VOC) deficits and performance degradation. This report presents an effective strategy for passivating GBs by incorporating an inorganic protective layer and reducing the density of GBs in perovskite films. This is achieved by integrating potassium thiocyanate (KSCN) into I‐Br mixed halide WBG perovskites. It is reported for the first time that the incorporation of KSCN creates band‐shaped barriers along the GBs. In addition, KSCN enlarges the grains of perovskite film. Elemental and structural analyses reveal that these barriers are composed of potassium lead halide. Incorporating KSCN significantly enhances the fill factor and VOC of WBG single‐junction PSCs by reducing trap density. This results in high power conversion efficiencies of 19.22% (bandgap of 1.82 eV), 20.45% (1.78 eV), and 21.54% (1.70 eV) with a C60/bathocuproine electron transport layer, and 18.51% (1.82 eV) with a C60/SnO2. Furthermore, both operational and shelf stabilities are significantly improved due to reduced light‐induced halide segregation. By using inorganic‐halide‐passivated WBG sub‐cells, a monolithic all‐perovskite tandem solar cell with an efficiency of 27.04% is demonstrated.

Efficiency Enhancement of Wide Bandgap Lead Perovskite Solar Cells with PTAA Surface-Passivated with Monomolecular Layer from the Viewpoint of PTAA Band Bending

Perovskite Solar Cells Consisting of PTAA Modified with Monomolecular Layer and Application to All‐Perovskite Tandem Solar Cells with Efficiency over 25%

Wide-Gap Perovskite Via Synergetic Surface Passivation and Its Application Toward Efficient Stacked Tandem Photovoltaics.

PTAA as Efficient Hole Transport Materials in Perovskite Solar Cells: A Review

Tail states suppression via surface-modification of wide-bandgap perovskites for high-efficiency all-perovskite photovoltaic tandems

Surface-tension release in PTAA-based inverted perovskite solar cells

Crystallization Regulation and Defect Passivation for Efficient Inverted Wide‐Bandgap Perovskite Solar Cells with over 21% Efficiency

High performance wide bandgap Lead-free perovskite solar cells by monolayer engineering

Structure engineering of hierarchical layered perovskite interface for efficient and stable wide bandgap photovoltaics

Crystallization Enhancement and Ionic Defect Passivation in Wide‐Bandgap Perovskite for Efficient and Stable All‐Perovskite Tandem Solar Cells

Surface Crystallization Enhancement and Defect Passivation for Efficiency and Stability Enhancement of Inverted Wide-Bandgap Perovskite Solar Cells

Stabilizing Wide‐Bandgap Perovskite with Nanoscale Inorganic Halide Barriers for Next‐Generation Tandem Technology

Interfacial Engineering of PTAA/Perovskites for Improved Crystallinity and Hole Extraction in Inverted Perovskite Solar Cells

Self‐Assembled Amphiphilic Monolayer for Efficient and Stable Wide‐Bandgap Perovskite Solar Cells

Highly Efficient and Stable Wide-Bandgap Perovskite Solar Cells Via Strain Management

Enhanced Efficiency and Stability of Wide‐Bandgap Perovskite Solar Cells Via Molecular Modification with Piperazinium Salt

Dual interface strategies enable efficient wide bandgap perovskite solar cells

Enhanced Efficiency and Intrinsic Stability of Wide-Bandgap Perovskite Solar Cells through Dimethylamine-Based Cation Engineering

Achieving efficient inverted planar perovskite solar cells with nondoped PTAA as a hole transport layer

Low‐Dimensional 2‐thiopheneethylammonium Lead Halide Capping Layer Enables Efficient Single‐Junction Methylamine‐Free Wide‐Bandgap and Tandem Perovskite Solar Cells

Tri(4-trifluoromethylphenyl)phosphine-Modified Hole-Transport Material PTAA to Improve the Performance of Perovskite Solar Cells