Abstract:The intracavity topologies of laser gravitational-wave detectors are the promising way to obtain sensitivity of these devices significantly better than the Standard Quantum Limit (SQL). The most challenging element of the intracavity topologies is the \emph{local meter} which has to monitor position of a small ($1\div10$ gram) local mirror and which precision defines the sensitivity of the detector.
To overcome the SQL, the quantum variational measurement can be used in the local meter. In this method a frequency-dependent correlation between the meter back-action noise and measurement noise is introduced, which allows to eliminate the back-action noise component from the meter output signal. This correlation is created by means of an additional filter cavity.
In this article the sensitivity limitations of this scheme imposed by the optical losses both in the local meter itself and in the filter cavity are estimated. It is shown that the main sensitivity limitation stems from the filter cavity losses. In order to overcome it, it is necessary to increase the filter cavity length. In a preliminary prototype experiment about 10 meter long filter cavity can be used to obtain sensitivity approximately $2\div3$ times better than the SQL. For future QND gravitational-wave detectors with sensitivity about ten times better than the SQL, the filter cavity length should be within kilometer range.
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to explore the interaction between discrete noise and nonlinear chemical kinetics in the signal amplification cascade. Specifically, the author focuses on the situation where traditional methods such as the linear noise approximation and Langevin equation become inapplicable when the number of proteins is very low. Therefore, they developed a new analytical approximation method, combining the methods of generating functions and distribution functions to solve the master equation that describes the nonlinear chemical signal kinetics.
### Main problems
1. **Randomness of signal propagation**: Inside cells, especially in protein signal transduction cascades, due to the limited number of molecules, chemical reactions are essentially stochastic, which leads to the heterogeneity and volatility of signal propagation.
2. **Limitations of traditional methods**: Commonly used linear noise approximation and Langevin equation cannot accurately describe the kinetic behavior of signal transduction when the number of proteins is low.
3. **Impact of strong fluctuations**: Under certain conditions, the upstream burst - phase noise may be injected into the dynamics of the downstream signal network, resulting in abnormally large macroscopic fluctuations.
### Solutions
To overcome the above problems, the author proposed a new analytical method, a hybrid method based on generating functions and distribution functions to solve the master equation. This method can provide time - dependent probability distributions in a wider range of protein number fluctuations, thereby better describing the stochastic kinetics in nonlinear signal transduction cascades.
### Key findings
- **Effectiveness of the generating function method**: Through the generating function method, the author was able to obtain a complete, time - dependent probability distribution, not just the first two moments (mean and variance).
- **Noise propagation and attenuation mechanisms**: The study found that in the case of fast upstream reactions and slow downstream reactions, noise will be attenuated; while in the case of slow upstream reactions and fast downstream reactions, noise will be amplified.
- **Existence of strong fluctuations**: Even when the number of downstream proteins is very large, strong fluctuations may still exist, indicating that the traditional \(\sqrt{N}\) fluctuation estimation method is not applicable in this case.
### Formula examples
The master equation involved in the paper is:
\[
\frac{dP(m,n)}{dt}=\mu[-mnP(m,n)+m(n + 1)P(m,n + 1)]+\lambda[-(N - n)P(m,n)+(N - n + 1)P(m,n - 1)]+g[-P(m,n)+P(m - 1,n)]+k[-mP(m,n)+(m + 1)P(m + 1,n)]
\]
where \(P(m,n)\) represents the probability of having \(m\) \(R^*\) and \(n\) \(A\) at a certain moment.
The generating function is defined as:
\[
\Psi(x,y)=\sum_{m,n}P(m,n)x^m y^n
\]
The time - evolution equation it satisfies is:
\[
\frac{\partial\Psi}{\partial t}=(1 - y)(\mu x\frac{\partial^2}{\partial x\partial y}-\lambda N+\lambda y\frac{\partial}{\partial y})\Psi+g(x - 1)\Psi-k(x - 1)\frac{\partial\Psi}{\partial x}
\]
Through these formulas and methods, the author successfully revealed the complex interaction between discrete noise and nonlinear chemical kinetics in the signal amplification cascade.