Abstract:The rapid development of wearable electronics, humanoid robots, and artificial intelligence requires sensors to sensitively and stably detect external stress variations in large areas or on three-dimensional (3D) irregularly shaped surfaces while possessing the comfort. Most importantly, the flexibility and 3D compliance of sensors, and the fitting state of the interface between the sensor and the object are of great significance to the sensing accuracy and reliability. The ordered or random stacking and entangling of flexible and electrically conductive fiber materials can form a highly porous and mechanically stable fiber assembly. The changes in external stress can lead to the air trapped in the fiber assembly to flow in and out rapidly and repeatedly, as well as the reversible mechanical deformation of fiber materials. Correspondingly, the contact areas between electrically conductive fibers in the fiber assembly are reversibly changed, which makes the conductive and flexible fiber assembly be an ideal candidate for piezoresistive sensing material. It can be further expected that the statistical stability of contact points between conductive fibers under the stress may significantly increase with the decrease in fiber diameters. Herein, a new method to make a flexible piezoresistive sensor with conductive and porous fiber assembly was proposed. An ultrasensitive piezoresistive material was facilely prepared by fabricating conductive poly(vinyl alcohol-<i>co</i>-ethylene) (EVOH) nanofiber assemblies. The sensing performance of the piezoresistive sensor was optimized by regulating the nanofiber morphology, electrical conductivity, and mechanical properties. The flexible piezoresistive sensor exhibited a sensitivity of 2.79 kPa<sup>–1</sup>, a response time of 3 ms, and a recovery time of 10 ms. The sensing performance at different working frequencies was stable and durable within 4500 cycling tests. The flexible sensor showed good pressure-sensing accuracy and reliability when used on irregular surfaces and therefore was further applied in the static monitoring of large-area spatial pressure distribution and the wearable intelligent interactive device, demonstrating great application potential.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10516?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10516</a>.SEM images, water transmission ability, stability, the resistance change of the CNA while stretching and bending, optimized sensing performance of CNA, and the calculation model analysis of the CNA (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10516/suppl_file/am0c10516_si_001.pdf">PDF</a>)Recording of the specific example of the corresponding zoom-in and zoom-out functions when the fingers perform the opening and merging operations (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10516/suppl_file/am0c10516_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.

A 3D‐Printed, Sensitive, Stable, and Flexible Piezoresistive Sensor for Health Monitoring

Highly Sensitive Flexible Piezoresistive Sensor with 3D Conductive Network

A 3D Flexible Piezoresistive Sensor Based on Surface-Filled Graphene Nanosheets Conductive Layer

Flexible piezoresistive sensors with 3D CB/graphene conductive networks

A low-cost flexible piezoresistive sensor with high sensitivity and broad detection range based on porous random microstructures for wearable electronics

A Flexible and Multipurpose Piezoresistive Strain Sensor Based on Carbonized Phenol Formaldehyde Foam for Human Motion Monitoring

A breathable, sensitive and wearable piezoresistive sensor based on hierarchical micro-porous PU@CNT films for long-term health monitoring

Breathable and Large Curved Area Perceptible Flexible Piezoresistive Sensors Fabricated with Conductive Nanofiber Assemblies

High-Sensitivity Flexible Pressure Sensor-Based 3D CNTs Sponge for Human–Computer Interaction

3D fabric-based piezoresistive pressure sensor: design, preparation, performance and simulation

Flexible Sensors with Enhanced Sensitivity and Broadened Detection Range Through Conformal Printing and Space‐Confined Design

Human touch sensation-inspired, ultrawide-sensing-range, and high-robustness flexible piezoresistive sensor based on CB/MXene/SR/fiber nanocomposites for wearable electronics

A novel flexible piezoresistive sensor using superelastic fabric coated with highly durable SEBS/TPU/CB/CNF nanocomposite for detection of human motions

Flexible and Breathable Piezoresistive Sensors Based on Reduced Graphene Oxide/Silk Fiber/Carbon Cloth Composites for Health Monitoring

Biocompatible and breathable all-fiber-based piezoresistive sensor with high sensitivity for human physiological movements monitoring

High-performance Flexible Piezoresistive Pressure Sensor Based on Multi-layer Interlocking Microstructures

Flexible piezoelectric sensor based on Polyacrylonitrile/MWCNT/MXene composites films for human physiological health detection

Highly Sensitive and Stable 3D Flexible Pressure Sensor Based on Carbon Black and Multi-Walled Carbon Nanotubes Prepared by Hydrothermal Method

Two-Stage Micropyramids Enhanced Flexible Piezoresistive Sensor for Health Monitoring and Human-Computer Interaction.

Flexible Piezoresistive Sensor with the Microarray Structure Based on Self-Assembly of Multi-Walled Carbon Nanotubes

High-Performance Flexible Piezoresistive Sensor Based on Ti3C2Tx MXene with a Honeycomb-like Structure for Human Activity Monitoring