Abstract:High-power energy storage devices, and supercapacitors (SCs) in particular, are critical for the progress of the energy sector as they gather distinctive characteristics, namely, long cyclability and high-power density. However, SC still faces some challenges, namely, very low energy density when compared to batteries and the need to operate in organic solvents to attain larger potential windows. Therefore, advances are necessary to reach higher energy density in more environmentally friendly electrolytes. This study focuses on testing mixtures of water with hydrophobic eutectic systems (ESs), in which the components are environmentally compatible, as electrolytes for SCs. Four different ESs of sodium hexanoate and carboxyl acids (hexanoic acid, octanoic acid, nonanoic acid, and decanoic acid) were studied. The physical characterization of these mixtures was studied through measurement and exploration of several properties, namely, sol–gel diagrams, conductivity, viscosity, density, and ionicity. The electrochemical performance of these mixtures was tested in electrochemical double-layer capacitor cells with microporous activated carbon electrodes through cyclic voltage diffraction and galvanostatic charge–discharge. Overall, it was observed that the hydrophobicity of these systems allows conductive gels to form simply by adding water. The conductivity and fluidity of ESs increased with the water content. Additionally, the specific capacitance decreases when the acid chain increases, while in the voltammograms, resistive features vanish as the water content increases. From this study, the ES of sodium hexanoate with hexanoic acid with 60% molar composition in acid mixtures [NaC6:C6(0.6)] showed the highest conductivity, 22.3 mS/cm at 293.15 K, and the highest electrode specific capacitance, 71.6 F/g at 0.2 A/g, for a weight water composition of 60%.

Molten salt electrolytes for electrochemical capacitors with energy densities exceeding 50 W h kg−1

Adapting a Kinetics-Enhanced Carbon Nanostructure to Li/Na Hybrid Water-in-Salt Electrolyte for High-Energy Aqueous Supercapacitors

Dry Electrode Processing for High‐Performance Molten Salt Batteries

Emerging Molten Salts Based Electrochemical Energy Technologies

A Flexible Supercapacitor with High Energy Density Driven by MXene/Deep Eutectic Solvent Gel Polyelectrolyte

Electrochemical Capacitors with Confined Redox Electrolytes and Porous Electrodes

Modulating Electrolyte Solvation Structure for High‐Voltage and Low‐Temperature Magnesium‐ion Supercapacitors

Salty Ice Electrolyte with Superior Ionic Conductivity Towards Low‐Temperature Aqueous Zinc Ion Hybrid Capacitors

High‐Performance Ionic Thermoelectric Supercapacitor for Integrated Energy Conversion‐Storage

Additive Engineering Enables Ionic-Liquid Electrolyte-Based Supercapacitors To Deliver Simultaneously High Energy and Power Density

Reversible Intercalation of Al‐Ions in Poly(3,4‐Ethylenedioxythiophene):Poly(4‐Styrenesulfonate) Electrode for Aqueous Electrochemical Capacitors with High Energy Density

Small‐Molecular Crowding Electrolyte Enables High‐Voltage and High‐Rate Supercapacitors

Electrolyte Technologies for High Performance Sodium-Ion Capacitors

Enhancing performance of sandwich-like cobalt sulfide and carbon for quasi-solid-state hybrid electrochemical capacitors

Liquefied gas electrolytes for electrochemical energy storage devices

A Divalent Quaternary Alkyl Ammonium Salt As the Electrolyte for High-Energy Electric Double-Layer Capacitors

Kinetic regulation of MXene with water-in-LiCl electrolyte for high-voltage micro-supercapacitors

Effect of Salt Concentration in Water‐In‐Salt Electrolyte on Supercapacitor Applications

Natural Eutectic Mixtures of Sodium Salt and Fatty Acids as Electrolytes for Supercapacitors

Understanding the Electrolyte/Electrode Interfacial Interactions for the Development of High-Performance Aqueous Redox-Enhanced Electrochemical Capacitors