Abstract:In the direct laser deposition (DLD) process, it is common to employ constant processing parameters. The utilization of the constant parameters may lead to fluctuations in the dynamic evolution of the molten pool, primarily due to the intricate thermal effects involved, which will significantly impact the processing quality. To address this issue, this study proposed a closed-loop control approach that effectively modifies processing parameters in real time by targeting on the molten pool transient area. The type of the laser used in this study is a flat-top beam. Laser power, powder feeder rate, and scanning speed are the input variables of the study to control molten pool, considering the manufacturing system. The most suitable processing parameter to control the molten pool area was found to be the laser power by a set of orthogonal experiments, with a correlation coefficient of 0.706, and significance level of 0.002. Then, the dynamic response relationship between laser power and the molten pool area was mathematically characterized by a third-order transfer function model to simplify the complex physical model of the DLD process. Subsequently, a PID controller with a filtering coefficient and anti-windup compensation was chosen compared with the other controller. In the validation experiments, it was observed that the closed-loop processing group demonstrated improved stability in maintaining the molten pool transient area, with a notable decrease of 33.7% in variability compared to the open-loop processing group. As a result, the deposited layer of the closed-loop processing group exhibited a much more satisfying surface quality and heat affect zone than the open-loop group. This study established a third-order mathematical model of the dynamic molten pool and realized the optimization of deposition quality by controlling the molten pool transient area with an enhanced PID controller, providing a fundamental basis for improving the consistency of the direct laser deposition processing quality through the implementation of real-time feedback control of molten pool physics.

Proportional integral differential control of large-scale digital light three-dimensional printing for energetic homogenization based on improved slime mold and an interpolation algorithm

Design of an intelligent controller for a grain dryer: A support vector machines for regression inverse model proportional–integral–derivative controller

High-fidelity and high-efficiency additive manufacturing using tunable pre-curing digital light processing

Numerical Simulation and Printability Analysis of Fused Deposition Modeling with Dual-Temperature Control

Projection-Based Continuous 3D Printing Process with the Grayscale Display Method

Optimize projected mask images for improving three-dimensional printing accuracy for digital light processing based vat photopolymerization

Developing the optimized control scheme for continuous and layer-wise DLP 3D printing by CFD simulation

Integration Research on Digital Control of Flexible Packaging Gravure Plate-making Process

Real-time closed-loop control of molten pool transient area in direct laser deposition via PID algorithm with enhanced robustness

Quantitative Characterization of Liquid Photosensitive Bioink Properties for Continuous Digital Light Processing Based Printing

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

EHMP-DLP: multi-projector DLP with energy homogenization for large-size 3D printing

Improvement and Experimental Explore on Coordinated Control of Kinematic Mechanism of FDM 3D Printer

Topology Optimization for Digital Light Projector Additive Manufacturing Addressing the In-Situ Structural Strength Issue

A virtual visualization method for improving the manufacturing accuracy based VPP 3D printers

Pixel‐Level Grayscale Manipulation to Improve Accuracy in Digital Light Processing 3D Printing

Minimizing Polymer Curl Distortion and Heat Impact to Improve Digital Light Processing Printing Accuracy via Subdivision Method

A Scalable Digital Light Processing 3D Printing Method

Design for the reduction of volume shrinkage-induced distortion in digital light processing 3D printing

Optimizing Manufacturing Parameters of DLP Machine by Taguchi Method and Desirability Approach

High-accuracy DLP 3D printing of closed microfluidic channels based on a mask option strategy