Abstract:Bioaerosols exposure can lead to many adverse health effects and even result in death if highly infectious agents involved. Apparently, there is a great need for rapid detection of bioaerosols, for which air sampling often is the first critical step. However, currently available samplers often either require an external power and/or with low sampling flow rate, thus falling short of providing a practical solution when response time is of great concern. Here, we have designed and evaluated a new portable high volume bioaerosol sampler named as HighBioTrap through optimizing its operating parameters. The sampler was operated at a sampling flow rate of 1200 L/min, with an impaction velocity of about 10.2 m/s (S/W = 1.5, T/W = 1), while the weight of the sampler is about 1.9 kg. The performances of the HighBioTrap sampler were tested both in lab controlled and natural environments (outdoor and indoor environments in a university building) along with the reference sampler-the BioStage impactor using aerosolized Polystyrene (PS) uniform microspheres of various sizes, aerosolized bacteria and also ambient air particles. The microbial community structures of collected culturable bacterial aerosol particles both by the HighBioTrap and the BioStage impactor in the natural environments were analyzed using gene sequence method. Experimental results with PS particles showed the HighBioTrap has a cutoff size of similar to 2 mu m. The widely used impactor design equation was found to be not applicable for predicting the performance of the HighBioTrap due to its large Reynolds number. When sampling aerosolized individual Pseudomonas fluorescens and Bacillus subtilis bacterial particles, the HighBioTrap had physical collection efficiencies of 10% and 20%, respectively. Despite the higher desiccation effects introduced by higher flow rate, the HighBioTrap was shown to obtain a higher microbial diversity than the BioStage impactor for both in outdoor and indoor environments given the same sampling time (p < 0.01). Our data also showed that most of the desiccation effects might have occurred between 3 and 5 min of the sampling and an impaction velocity of around 10 m/s might be a close-to-optimal impaction velocity for collecting most environmental bacterial aerosols while maximally preserving their culturability. This work contributes to our understanding of microbial sampling stress (impaction velocity and sampling time), while developing a portable high volume sampler. The HighBioTrap sampler could find its great efficiencies in qualitative microbial aerosol detection and analysis, such as investigation of microbial aerosol diversity for a particular environment, or when the low level of pathogens is present and detection time is of great concern.

Online monitoring system for qualitative and quantitative analysis of bioaerosols by combined ATP bioluminescence assay with loop-mediated isothermal amplification

Size-classified monitoring of ATP bioluminescence for rapid assessment of biological distribution in airborne particulates

Portable automatic bioaerosol sampling system for rapid on-site detection of targeted airborne microorganisms.

Recent progress in online detection methods of bioaerosols

Air Sampling and ATP Bioluminescence for Quantitative Detection of Airborne Microbes

Integration of High Volume Portable Aerosol-to-hydrosol Sampling and Qpcr in Monitoring Bioaerosols.

A High-Flow Portable Biological Aerosol Trap (highbiotrap) for Rapid Microbial Detection

High-Throughput Microfluidic Device for LAMP Analysis of Airborne Bacteria

Microfluidic Air Sampler for Highly Efficient Bacterial Aerosol Collection and Identification

On-site monitoring of airborne pathogens: recent advances in bioaerosol collection and rapid detection

A Semi-Quantitative Method for Point-of-care Assessments of Specific Pathogenic Bioaerosols Using a Portable Microfluidics-Based Device

Detection of airborne pathogens with single photon counting and a real-time spectrometer on microfluidics

Real-time environmental surveillance of SARS-CoV-2 aerosols

Analysis of Portable Impactor Performance for Enumeration of Viable Bioaerosols

An ultrasensitive and rapid “sample-to-answer” microsystem for on-site monitoring of SARS-CoV-2 in aerosols using “in situ” tetra-primer recombinase polymerase amplification

Bioanalysis Within Microfluidics: A Review

Comprehensive performance evaluation of six bioaerosol samplers based on an aerosol wind tunnel

On-Site Bioaerosol Sampling and Airborne Microorganism Detection Technologies

Development of Aerosol Sample Introduction Interface Coupled with ICP-MS for Direct Introduction and Quantitative Online Monitoring of Environmental Aerosol

A novel laminar-flow-based bioaerosol test system to determine biological sampling efficiencies of bioaerosol samplers

Towards Real-Time Airborne Pathogen Sensing: Electrostatic Capture and On-Chip LAMP Based Detection of Airborne Viral Pathogens