Abstract:Abstract Collaborative robots such as Universal Robotics and KUKA are well developed and well known throughout the world. Nowadays, the manipulator structure uses a brushless motor with an RV reducer, or a harmonic reducer, and has a built-in driver to form a joint module and is composed of a connecting rod. This paper proposes a four-axis manipulator based on the novel two-stage cycloidal reducers and hub motors. The traditional two-stage cycloidal speed reducer requires two cycloidal gears through the first-stage speed reducer. Therefore, the traditional two-stage cycloidal reducer has four cycloidal gears. The novel two-stage cycloidal speed reducer simplifies this design. The design of the secondary deceleration is achieved by connecting two different numbers of cycloidal teeth and a phase difference of 180 degrees to the intermediate central disc so that the two-stage speed reduction can be achieved, and the reduction ratio is 136. Use this type of speed reducer, with a 200W hub motor, to build a four-axis manipulator and place a driver in the rod to save space. The proposed manipulator specifications: 4 degrees of freedom, the maximum payload is 18kg, the total weight is 37kg, the maximum working space is 0.7 meters, the efficiency of the reducer is 73.657% and the backlash of the reducer is 1.135°. The features of this four-axis manipulator are lightweight, low power, low cost, high-payload, and long life. This type of reducer is also a new option in addition to RV reducer and harmonic reducer for driving manipulator’s joint.

A Six‐Axis Asymmetric Parallel Manipulator Co‐Driven by Direct‐Drive and Geared Motors for Enhanced Force‐Sensing Capability

Design Paradigm for Human Size Manipulator with High Payload, Repeatability, and Bandwidth

The High-payload Manipulator Development Based on Novel Two-stage Cycloidal Speed Reducers and Hub Motors

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

Kinematics and dynamics analysis of a six-degree of freedom parallel manipulator

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Mechatronic Model Based Computed Torque Control of a Parallel Manipulator

Application-Oriented Co-Design of Motors and Motions for a 6DOF Robot Manipulator

Dynamic model and force control of the redundantly actuated parallel manipulator of a 5-dof hybrid machine tool

Design of a New XY Compliant Parallel Manipulator Based on Deployable Spatial Monolithic Structure

Mechanism Design of A Simplified 6-Dof 6-Rus Parallel Manipulator

An Experimental Study of a Redundantly Actuated Parallel Manipulator for a 5-DOF Hybrid Machine Tool

Dimensional Synthesis and Dynamic Manipulability of a Planar Two-Degree-of-freedom Parallel Manipulator

Design and implementation of a 2-DOF 5R parallel mechanism with a coaxial-driven layout

Development of a linear decoupling cable-driven manipulator with independent driving joints ,

A Six-axis Force/Torque Sensor Method for the Inertial Parameter Identification of a Parallel Manipulator

Dynamic Performance Comparison and Counterweight Optimization of Two 3-DOF Parallel Manipulators for a New Hybrid Machine Tool

Design and testing of a high precision parallel manipulator with hyperbolic–elliptic flexure hinges

A new family of spatial 3-DoF fully-parallel manipulators with high rotational capability

Modeling Of A 6-Dof Parallel Manipulator Driven By Pneumatic Muscles