Abstract:Recent trends of interferometric wavefront sensing tend to focus on high precision, anti-vibration, compact, along with much more involved of electric and computer technology. And the optical principles employed not only limit to interference but also include diffraction, scattering, polarization, etc. In this paper, some selected examples basing on the research works in our group will be given to illustrate the trends mentioned above. To achieve extra high accuracy, phase-shifting point diffraction interferometry (PS-PDI) is believed to be a good candidate as it employs a nearly perfect point diffraction spherical wavefront as the reference and also takes advantage of the high precision of phase-shifting algorithms. Cyclic radial shearing interferometry (C-RSI) successively demonstrate the anti-vibration characteristic and can diagnose transient wavefront with only one single shot by employing a three-mirror common-path configuration and a synchronizing system. In contrast sharply with those early interferometers, interferometers with very compact configuration are more suitable to develop portable wavefront sensing instruments. Cross-grating lateral shearing interferometer (CG-LSI) is a very compact interferometer that adopts a cross-grating of millimeters to produce lateral shearing of the diffraction wave of the test wavefront. Be aware that, computer technique has been used a lot in all of the above interferometers but the non-null annual sub-aperture stitching interferometer (NASSI) for general aspheric surface testing mostly relies on the computer model of the physical interferometer setup and iterative ray-tracing optimization. The principles of the above mentioned interferometric wavefront sensing methods would be given in detail.

Differential schlieren-interferometry with a simple adjustable Wollaston-like prism

Multi-Directional Lateral Shearing Interferometer Based on Rotatable Prism Pairs

Simple, adjustable beam splitting element for differential interferometers based on photoelastic birefringence of a prismatic bar

Single-shot reflective shearing point diffraction interferometer for wavefront measurements.

Finite Element Analysis on a Circular Wedge Prism with 400 Mm Diameter

Polarization Point Diffraction Interferometry Based on an Even Aspheric Quarter-Wave Plate

Dielectric multilayer beam splitter with differential phase shift on transmission and reflection for division-of-amplitude photopolarimeter.

Optical-mechanical-thermal Analysis on Prism Assembly of Precision Light Beam Scanner

Universal Interferometer Based on Dynamically-Adjusted Fringe Periods

Point Diffraction Interferometer Based on a Silicon Nitride Waveguide Spherical Wave Source

Comprehensive Design and Calibration of an Even Aspheric Quarter-Wave Plate for Polarization Point Diffraction Interferometry.

Design and Preparation of Multilayer Dielectric Beam Splitter for Division-of-Amplitude Photopolarimeter at 1064 nm

Measurement of the Group Refractive Index of Bulk Material Using White-Light Spectral Interferometry

Incorporation of A Differential Refractometer into A Laser Light-Scattering Spectrometer

Self-referenced prism deflection measurement schemes with microradian precision

Design And Analysis Of A Pair Of Prisms For Widening The Imaging Range Of An Optical System

Calculation and Analysis of the Optical Path Difference of Modified Wollaston Prism

Calculation of the Optical Path Difference and Fringe Location in Polarization Interference Imaging Spectrometer

Recent Developments of Interferometric Wavefront Sensing

Technical layout and fabrication of a compact all-glass four-channel beam splitter based on a Kösters design

Principle and analysis of a birefringent beam splitter