Abstract:The ejector refrigeration cycle (ERC) is often used as the sub-cycle of power and cooling cogeneration systems due to its advantages of simple structure design, few moving parts, less system investment, good stability and reliable operation. Considering the potential of organic Rankine cycle (ORC) in the utilization of low-grade heat, and the advantages of simple structure and many choices for working fluid, a novel power and cooling cogeneration system was designed, based on dual-pressure evaporation ORC (DORC) and ERC. In this system, a common condenser was used by DORC and ERC, and a part of working fluid separated from low-pressure steam generator outlet in DORC was used as the primary flow of ejector to drive ERC. A mathematical model for calculating the thermodynamic and thermoeconomic performances of the system was established. Sensitivity analysis was performed to determine the key parameters of the system, the results showed that the low-pressure evaporation temperature (TLPSG,out), high-pressure evaporation temperature (THP,E), vapor fraction of the low-pressure steam generator outlet (xLPSG,out) and working fluid mass flow ratio of high-pressure stage to low-pressure stage (k) were the four key parameters of the system. Parametric analysis showed that higher TLPSG,out and lower xLPSG,out were beneficial to increase the cooling output and thermal efficiency, while higher THP,E and larger k were helpful to increase the net power output and exergy efficiency. The net power output and exergy efficiency can be optimized by TLPSG,out and xLPSG,out. Using genetic algorithm (GA), multi-objective function optimization was carried out with THP,E, TLPSG,out, xLPSG,out and k as the decision variables. Moreover, the system's adaptability for working fluids R245fa, R236ea, R600, R600a, R601 and R601a was investigated. According to the optimization results, R236ea was the most suitable working fluid. When THP,E was 402.43K, TLPSG,out was 392.42K, xLPSG,out was 0.357 and k was 0.321, the calculated net power output , cooling output, thermal efficiency, exergy efficiency and total cost of unit exergy product (SUCP) were 273.00kW, 121.80kW, 14.52%, 44.03% and 42.62$/MWh, respectively. Exergy analysis was conducted using R236ea as working fluid. The results showed that the two steam generators and condenser were the main components responsible for most of the exergy destruction of the system in both basic case and optimized case. Compared to the basic case, the exergy destruction of the steam generators decreased by about 32.3%, and the total exergy destruction of the system decreased by about 5.0% in optimized case.

Performance analysis and optimization of engine waste heat recovery with an improved transcritical-subcritical parallel organic Rankine cycle based on zeotropic mixtures

Analysis of a 1 Kw Organic Rankine Cycle Using a Scroll Expander for Engine Coolant and Exhaust Heat Recovery

Thermodynamic Analysis of a Novel Transcritical-Subcritical Parallel Organic Rankine Cycle System for Engine Waste Heat Recovery

Parametric analysis and optimization of transcritical-subcritical dual-loop organic Rankine cycle using zeotropic mixtures for engine waste heat recovery

Experimental Investigations on Dynamic Performance of Organic Rankine Cycle Integrated with Latent Thermal Energy Storage under Transient Engine Conditions

Working Fluid Selection for a Small-Scale Organic Rankine Cycle Recovering Engine Waste Heat

Thermodynamic Analysis of an Innovative Transcritical CO2 Parallel Rankine Cycle Driven by Engine Waste Heat and Liquefied Natural Gas Cold

Dynamic Performance Analysis of Transcritical Power Cycle with Preheater and Regenerator Using CO2-based Binary Zeotropic Mixtures

Optimization of Binary Zeotropic Mixture Working Fluids for an Organic Rankine Cycle for Waste Heat Recovery Between Centrifugal Compressor Stages

Dynamic performance analysis of transcritical power cycle with preheater and regenerator using CO 2 -based binary zeotropic mixtures

Performance Assessment and Multi-Objective Optimization of a Novel Transcritical CO2 Rankine Cycle for Engine Waste Heat Recovery

Performance Assessment and Multi-Objective Optimization of a Novel Transcritical CO2 2 Rankine Cycle for Engine Waste Heat Recovery

Thermodynamic Analysis of Dual-Loop Organic Rankine Cycle Using Zeotropic Mixtures for Internal Combustion Engine Waste Heat Recovery

Potential of a Thermofluidic Feed Pump on Performance Improvement of the Dual-Loop Rankine Cycle Using for Engine Waste Heat Recovery

Performance Analysis and Optimization of a Combined Cooling and Power System Using Low Boiling Point Working Fluid Driven by Engine Waste Heat

Parallel and in-series arrangements of zeotropic dual-pressure Organic Rankine Cycle (ORC) for low-grade waste heat recovery

Potential of the Transcritical Rankine Cycle Using CO2-based Binary Zeotropic Mixtures for Engine's Waste Heat Recovery

Performance Analysis and Optimisation of Waste Heat Recovery System Based on Zeotropic Working Fluid

Performance Comparison and Working Fluid Analysis of Subcritical and Transcritical Dual-Loop Organic Rankine Cycle (DORC) Used in Engine Waste Heat Recovery

Comparative Study of Alternative ORC-based Combined Power Systems to Exploit High Temperature Waste Heat

Thermodynamic and thermoeconomic performance analyses and optimization of a novel power and cooling cogeneration system fueled by low-grade waste heat