Abstract:AbstractAccurate modeling of fractured reservoirs is very challenging due to the various scales of fractures. The fracture networks may be too complex to be represented using the equivalent continuum model (ECM) or dual porosity-dual permeability (DPDK) model, yet too computational costly to be modeled using the discrete fracture (DFM) or embedded discrete fracture (EDFM) models. This paper proposes a hybrid model that integrates ECM, DPDK, and an integrally embedded discrete fracture model (IEDFM) to account for multi-scale fractures. The hybrid model is applied to investigate the coupled geomechanics-fluid flow process in fractured reservoirs.In the hybrid model, small-scale fractures are upscaled into effective matrix permeability tensor using ECM, medium-scale fractures are considered as an individual continuum using DPDK, and large-scale fractures are explicitly represented using IEDFM. The multiphase flow in effective matrix and fracture continua is modeled using the multi-point flux approximation (MPFA), and fluid exchanges between the anisotropic continua and the large-scale fracture control volumes are precisely calculated using the IEDFM. Empirical models are used to calculate the displacement of natural fractures, and analytical models are used to calculate the aperture changes of hydraulic fractures. The overall deformation of a fractured rock is described using an equivalent method. The coupled geomechanics-fluid flow system is discretized by the finite element-finite volume method (FV-FEM) and solved using the fixed-stress split iterative coupling approach.Several examples are presented to demonstrate the applicability of the proposed method. The hybrid model is first employed to simulate water flooding process in a naturally fractured reservoir with multi-scale fractures. Effects of different scales of fractures, geomechanics coupling and capillary pressure are investigated. A case of producing from horizontal well in a hydraulic fractured tight oil reservoir is then studied, where the hydraulic fractures are modeled explicitly using IEDFM and the stimulation areas around hydraulic fractures are modeled using DPDK. Effects of stimulation area size on the pressure depletion and on the stress evolution process in the reservoir are investigated.

Peridynamic modeling of seepage in multiscale fractured rigid porous media

A 2D Mixed Fracture–pore Seepage Model and Hydromechanical Coupling for Fractured Porous Media

A peridynamics approach modeling gas flow in porous media with damaged regions

Coupled Geomechanics and Fluid Flow Modeling for Petroleum Reservoirs Accounting for Multi-Scale Fractures

Multiscale fractures integrated equivalent porous media method for simulating flow and solute transport in fracture-matrix system

Dynamic Simulation Method for Low-permeability Reservoirs with Fracturing-flooding Based on a Dual-Porous and Dual-Permeable Media Model

Dynamic Coupled Hydromechanical Approach for Fractured Rock Mass Seepage Using Two-Dimensional Discontinuous Deformation Analysis

Development of a modeling tool to assess seepage management options for large-scale water-sealed oil storage caverns

Seismic wave modeling of fluid-saturated fractured porous rock: including fluid pressure diffusion effects of discretely distributed large-scale fractures

A hydro-mechanical-damage fully coupled cohesive phase field model for complicated fracking simulations in poroelastic media

Hybrid FEM and peridynamic simulation of hydraulic fracture propagation in saturated porous media

A five-phase approach, SPH framework and applications for predictions of seepage-induced internal erosion and failure in unsaturated/saturated porous media

Simulating two-phase flow and geomechanical deformation in fractured karst reservoirs based on a coupled hydro-mechanical model

Fluid-solid-phase multi-field coupling modeling method for hydraulic fracture of saturated brittle porous materials

Simulation of coupled multiphase flow and geomechanics in porous media with embedded discrete fractures

A Novel Numerical Model for Fluid Flow in 3D Fractured Porous Media Based on an Equivalent Matrix-Fracture Network

Phase field model for simulating hydraulic fracture propagation and oil–water two-phase flow in reservoir

An immersed phase field fracture model for fluid-infiltrating porous media with evolving Beavers-Joseph-Saffman condition

Modeling dynamic crack branching in unsaturated porous media through multi-phase micro-periporomechanics

Coupled Geomechanics and Flow Modeling of Fractured Reservoirs Considering Matrix Permeability Anisotropy

Simulation of dynamic pulsing fracking in poroelastic media by a hydro-damage-mechanical coupled cohesive phase field model