Mathematical table turning revisited

Bill Baritompa,Rainer Löwen,Burkard Polster,Marty Ross

DOI: https://doi.org/10.48550/arXiv.math/0511490

2005-11-20

Abstract:We investigate under which conditions a rectangular table can be placed with all four feet touching a continuous ground by turning it on the spot.

History and Overview,General Topology

What problem does this paper attempt to address?

Hard x-ray broad band Laue lenses (80 - 600 keV): building methods and performances

E. Virgilli,F. Frontera,P. Rosati,V. Liccardo,S. Squerzanti,V. Carassiti,E. Caroli,N. Auricchio,J.B. Stephen

DOI: https://doi.org/10.1117/12.2190335

2015-09-11

Abstract:We present the status of the laue project devoted to develop a technology for building a 20 meter long focal length Laue lens for hard x-/soft gamma-ray astronomy (80 - 600 keV). The Laue lens is composed of bent crystals of Gallium Arsenide (GaAs, 220) and Germanium (Ge, 111), and, for the first time, the focusing property of bent crystals has been exploited for this field of applications. We show the preliminary results concerning the adhesive employed to fix the crystal tiles over the lens support, the positioning accuracy obtained and possible further improvements. The Laue lens petal that will be completed in a few months has a pass band of 80 - 300 keV and is a fraction of an entire Laue lens capable of focusing X-rays up to 600 keV, possibly extendable down to 20 - 30 keV with suitable low absorption crystal materials and focal length. The final goal is to develop a focusing optics that can improve the sensitivity over current telescopes in this energy band by 2 orders of magnitude.

Instrumentation and Methods for Astrophysics
Recent developments in Laue lens manufacturing and their impact on imaging performance

Lisa Ferro,Enrico Virgilli,Natalia Auricchio,Claudio Ferrari,Ezio Caroli,Riccardo Lolli,Miguel F. Moita,Piero Rosati,Filippo Frontera,Mauro Pucci,John B. Stephen,Cristiano Guidorzi

DOI: https://doi.org/10.1117/1.JATIS.10.1.014002

2024-01-17

Abstract:We report on recent progress in the development of Laue lenses for applications in hard X/soft gamma-ray astronomy. Here we focus on the realization of a sector of such a lens made of 11 bent Germanium crystals and describe the technological challenges involved in their positioning and alignment with adhesive-based bonding techniques. The accurate alignment and the uniformity of the curvature of the crystals are critical for achieving optimal X-ray focusing capabilities. We have assessed how the errors of misalignment with respect to the main orientation angles of the crystals affect the point spread function (PSF) of the image diffracted by a single sector. We have corroborated these results with simulations carried out with our physical model of the lens, based on a Monte Carlo ray-tracing technique, adopting the geometrical configuration of the Laue sector, the observed assembly accuracy and the measured curvatures of the crystals. An extrapolation of the performances achieved on a single sector to an entire Laue lens based on this model has shown that a PSF with half-power-diameter of 4.8 arcmin can be achieved with current technology. This has the potential to lead to a significant improvement in sensitivity of spectroscopic and polarimetric observations in the 50-600 keV band

Instrumentation and Methods for Astrophysics
Expected performances of a Laue lens made with bent crystals

E. Virgilli,V. Valsan,F. Frontera,E. Caroli,V. Liccardo,J.B. Stephen

DOI: https://doi.org/10.1117/1.JATIS.3.4.044001

2017-11-10

Abstract:In the context of the LAUE project devoted to build a Laue lens prototype for focusing celestial hard X-/soft gamma-rays, a Laue lens made of bent crystal tiles, with 20 m focal length, is simulated. The focusing energy passband is assumed to be 90--600 keV. The distortion of the image produced by the lens on the focal plane, due to effects of crystal tile misalignment and radial distortion of the crystal curvature, is investigated. The corresponding effective area of the lens, its point spread function and sensitivity are calculated and compared with those exhibited by a nominal Laue lens with no misalignment and/or distortion. Such analysis is crucial to estimate the optical properties of a real lens, in which the investigated shortcomings could be present.

Instrumentation and Methods for Astrophysics
Developing a method for soft gamma-ray Laue lens assembly and calibration

Nicolas M. Barrière,John A. Tomsick,Steven E. Boggs,Alexander Lowell,Colin Wade,Max Baugh,Peter von Ballmoos,Nikolay V. Abrosimov,Lorraine Hanlon

DOI: https://doi.org/10.1016/j.nima.2013.12.006

2013-12-03

Abstract:Laue lenses constitute a promising option for concentrating soft gamma rays with a large collection area and reasonable focal lengths. In astronomy they could lead to increased telescope sensitivity by one to two orders of magnitude, in particular for faint nuclear gamma-ray lines, but also for continua like hard X-ray tails from a variety of compact objects. Other fields like Homeland security and nuclear medicine share the same need for more sensitive gamma-ray detection systems and could find applications for gamma-ray focusing optics. There are two primary challenges for developing Laue lenses: the search for high-reflectivity and reproducible crystals, and the development of a method to accurately orient and fix the thousands of crystals constituting a lens. In this paper we focus on the second topic. We used our dedicated X-ray beamline and Laue lens assembly station to build a breadboard lens made of 15 crystals. This allowed us to test our tools and methods, as well as our simulation code and calibration procedure. Although some critical points were identified, the results are very encouraging, with a crystal orientation distribution lower than $10''$, as required to build a Laue lens telescope dedicated to the study of Type Ia supernovae (30-m focal length). This breadboard lens represents an important step towards raising the technology readiness level of Laue lenses.

Instrumentation and Methods for Astrophysics
Structure of poly(propyl ether imine) (PETIM) dendrimer from fully atomistic molecular Dynamics Simulation and by Small Angle X-ray scattering

Chandan Jana,G. Jayamurugan,R. Ganapathy,Prabal K. Maiti,N. Jayaraman,A. K. Sood

DOI: https://doi.org/10.1063/1.2194538

2006-11-18

Abstract:We study the structure of carboxylic acid terminated neutral poly (propyl ether imine) (PETIM) dendrimer from generation 1 through 6 (G1-G6) in a good solvent (water) by fully atomistic molecular dynamics (MD) simulations. We determine as a function of generation such structural properties as: radius of gyration, shape tensor, asphericity, fractal dimension, monomer density distribution, and end-group distribution functions. The sizes obtained from the MD simulations have been validated by Small Angle X-Ray Scattering (SAXS) experiment on dendrimer of generation 2 to 4 (G2-G4). A good agreement between the experimental and theoretical value of radius of gyration has been observed. We find a linear increase in radius of gyration with the generation. In contrast, Rg scales as ~ N^x with the number of monomers. We find two distinct exponents depending on the generations: x = 0.47 for G1-G3 and x = 0.28 for G3-G6 which reveals their non-space filling nature. In comparison with the amine terminated PAMAM dendrimer, we find Rg of G-th generation PETIM dendrimer is nearly equal to that of (G+1)-th generation of PAMAM dendrimer as observed by Maiti et. al. [Macromolecules,38, 979 2005]. We find substantial back folding of the outer sub generations into the interior of the dendrimer. Due to their highly flexible nature of the repeating branch units, the shape of the PETIM dendrimer deviates significantly from the spherical shape and the molecules become more and more spherical as the generation increases. The interior of the dendrimer is quite open with internal cavities available for accommodating guest molecules suggesting using PETIM dendrimer for guest-host applications. We also give a quantitative measure of the number of water molecules present inside the dendrimer.

Soft Condensed Matter,Materials Science
New results on focusing of gamma-rays with Laue lenses

F. Ferrari,F. Frontera,G. Loffredo,E. Virgilli,C. Guidorzi,V. Carassiti,F. Evangelisti,L. Landi,S. Chiozzi,S. Squerzanti,E. Caroli,J.B. Stephen,F. Schiavone,A. Basili,K.H. Andersen,P. Courtois

DOI: https://doi.org/10.1117/12.829272

2009-10-13

Abstract:We report on new results on the development activity of broad band Laue lenses for hard X-/gamma-ray astronomy (70/100-600 keV). After the development of a first prototype, whose performance was presented at the SPIE conference on Astronomical Telescopes held last year in Marseille (Frontera et al. 2008), we have improved the lens assembling technology. We present the development status of the new lens prototype that is on the way to be assembled.

Instrumentation and Methods for Astrophysics
Diffraction Efficiency of Multilayer-Based Laue Lens for Hard X-ray Focusing

黄秋实,李浩川,朱京涛,桑田,王占山,陈玲燕

IF: 0.6

2009-01-01

ACTA PHOTONICA SINICA

Abstract:The transmission of X-ray in Laue Lens is analyzed by the coupled wave theory.The diffraction efficiency of multilayer Laue Lens is calculated using Cu Kα line as the X-ray source.For the WSi2/Si multilayer Laue Lens with the outmost layer width of 10 nm,and the depth of 8 500 nm,the diffraction efficiency of the local gratings in the outer area reaches 59% in the case of tilted.Multilayer Laue Lens is proved to be an effective focusing method theoretically.
Carbon-based Fresnel optics for hard x-ray astronomy

Christoph Braig,Ivo Zizak

DOI: https://doi.org/10.1364/AO.57.001857

2018-03-10

Abstract:We investigate the potential of large-scale diffractive-refractive normal-incidence transmission lenses for the development of space-based hard x-ray telescopes with an angular resolution in the range of (10-6-10-3) arcsec over a field of view that is restricted by the available detector size. Coherently stepped achromatic lenses with diameters up to 5 m for compact apertures and 13 m in the case of segmentation provide an access to spectrally resolved imaging within keV-wide bands around the design energy between 10 and 30 keV. Within an integration time of 106 s, a photon-limited 5σ sensitivity down to (10-9-10-7) s-1 cm-2 keV-1 can be achieved depending on the specific design. An appropriate fabrication strategy, feasible nowadays with micro-optical technologies, is considered and relies on the availability of high-purity carbon or polymer membranes. X-ray fluorescence measurements of various commercially available carbon-based materials prove for most of them the existence of a virtually negligible contamination by critical trace elements such as transition metals on the ppm level.
Focusing of Hard X-Rays with Spherical Compound Refractive Lens

Chengchao Huang,Yury I. Dudchik,Baozhong Mu,Zhanshan Wang,Guoqiang Pan

DOI: https://doi.org/10.1117/12.824847

2009-01-01

Abstract:A focusing test of hard x-rays has been done using spherical compound refractive lens which was composed of 123 biconcave microlenses with a size of 200 μm in diameter. Each microlens was formed by the epoxy between two bubbles which were injected into an epoxy-filled glass capillary. The focal length of the lens was 114 mm at 8 keV. The optical simulation was completed by ray tracing by the commercial program of ZEMAX. The estimated size of focal spot was 17.2 μm. The focusing experiment has been achieved at U7B beamline in the National Synchrotron Radiation Laboratory (NSRL) at the energy of 8 keV. The measured focal spot size (FWHM) was 33.3x65.9 μm2 (VxH).
Laue gamma-ray lenses for space astrophysics:status and prospects

Filippo Frontera,Peter Von Ballmoos

DOI: https://doi.org/10.48550/arXiv.1007.4308

2010-07-25

Instrumentation and Methods for Astrophysics

Abstract:We review feasibility studies, technological developments and astrophysical prospects for Laue lenses devoted to hard X-/gamma-ray astronomy observations.
Development status of the LAUE project

F. Frontera,E. Virgilli,V. Liccardo,V. Valsan,V. Carassiti,S. Chiozzi,F. Evangelisti,S. Squerzanti,M. Statera,V. Guidi,C. Ferrari,R. A. Zappettini,E. Caroli,N. Auricchio,S. Silvestri,R. Camattari,F. Cassese,L. Recanatesi,M. Pecora,S. Mottini,B. Negri

DOI: https://doi.org/10.1117/12.926378

2012-11-21

Abstract:We present the status of LAUE, a project supported by the Italian Space Agency (ASI), and devoted to develop Laue lenses with long focal length (up to 100 meters), for hard X--/soft gamma--ray astronomy (80-600 keV). Thanks to their focusing capability, the design goal is to improve the sensitivity of the current instrumention in the above energy band by 2 orders of magnitude, down to a few times $10^{-8}$ photons/(cm$^2$ s keV).

Instrumentation and Methods for Astrophysics
The TRILL project: increasing the technological readiness of Laue lenses

Lisa Ferro,Enrico Virgilli,Miguel Moita,Filippo Frontera,Piero Rosati,Cristiano Guidorzi,Claudio Ferrari,Riccardo Lolli,Ezio Caroli,Natalia Auricchio,John B. Stephen,Stefano Del Sordo,Carmelo Gargano,Stefano Squerzanti,Mauro Pucci,Olivier Limousin,Aline Meuris,Philippe Laurent,Hugo Allaire

DOI: https://doi.org/10.1117/12.2629872

2023-09-20

Abstract:Hard X-/soft Gamma-ray astronomy (> 100 keV) is a crucial field for the study of important astrophysical phenomena such as the 511 keV positron annihilation line in the Galactic center region and its origin, gamma-ray bursts, soft gamma-ray repeaters, nuclear lines from SN explosions and more. However, several key questions in this field require sensitivity and angular resolution that are hardly achievable with present technology. A new generation of instruments suitable to focus hard X-/soft Gamma-rays is necessary to overcome the technological limitations of current direct-viewing telescopes. One solution is using Laue lenses based on Bragg's diffraction in a transmission configuration. To date, this technology is in an advanced stage of development and further efforts are being made in order to significantly increase its technology readiness level (TRL). To this end, massive production of suitable crystals is required, as well as an improvement of the capability of their alignment. Such a technological improvement could be exploited in stratospheric balloon experiments and, ultimately, in space missions with a telescope of about 20 m focal length, capable of focusing over a broad energy pass-band. We present the latest technological developments of the TRILL (Technological Readiness Increase for Laue Lenses) project, supported by ASI, devoted to the advancement of the technological readiness of Laue lenses. We show the method we developed for preparing suitable bent Germanium and Silicon crystals and the latest advancements in crystals alignment technology.

Instrumentation and Methods for Astrophysics,Instrumentation and Detectors
X-Ray Nanometer Focusing at the Ssrf Based on A Multilayer Laue Lens

Zhu Jing-Tao,Tu Yu-Chun,Li Hao-Chuan,Yue Shuai-Peng,Huang Qiu-Shi,Li Ai-Guo,Wang Zhan-Shan

DOI: https://doi.org/10.1088/1674-1137/39/12/128001

IF: 2.944

2015-01-01

Chinese Physics C

Abstract:We designed and fabricated a multilayer Laue lens (MLL) as a hard X-ray focusing device. WSi2/Si multilayers were chosen owing to their excellent optical properties and relatively sharp interface. The multilayer sample was fabricated by using direct current (DC) magnetron sputtering technology and then was sliced and thinned to form an MLL. The thickness of each layer was determined by scanning electron microscopy (SEM) image analysis with marking layers. The focusing property of the MLL was measured at Beam line 15U, Shanghai Synchrotron Facility (SSRF). One-dimensional (1D) focusing resolutions of 92 nm are obtained at photon energy of 14 keV.
X-ray focusing with efficient high-NA multilayer Laue lenses

Saša Bajt,Mauro Prasciolu,Holger Fleckenstein,Martin Domaracký,Henry N Chapman,Andrew J Morgan,Oleksandr Yefanov,Marc Messerschmidt,Yang Du,Kevin T Murray,Valerio Mariani,Manuela Kuhn,Steven Aplin,Kanupriya Pande,Pablo Villanueva-Perez,Karolina Stachnik,Joe Pj Chen,Andrzej Andrejczuk,Alke Meents,Anja Burkhardt,David Pennicard,Xiaojing Huang,Hanfei Yan,Evgeny Nazaretski,Yong S Chu,Christian E Hamm

DOI: https://doi.org/10.1038/lsa.2017.162

2018-03-23

Abstract:Multilayer Laue lenses are volume diffraction elements for the efficient focusing of X-rays. With a new manufacturing technique that we introduced, it is possible to fabricate lenses of sufficiently high numerical aperture (NA) to achieve focal spot sizes below 10 nm. The alternating layers of the materials that form the lens must span a broad range of thicknesses on the nanometer scale to achieve the necessary range of X-ray deflection angles required to achieve a high NA. This poses a challenge to both the accuracy of the deposition process and the control of the materials properties, which often vary with layer thickness. We introduced a new pair of materials-tungsten carbide and silicon carbide-to prepare layered structures with smooth and sharp interfaces and with no material phase transitions that hampered the manufacture of previous lenses. Using a pair of multilayer Laue lenses (MLLs) fabricated from this system, we achieved a two-dimensional focus of 8.4 × 6.8 nm2 at a photon energy of 16.3 keV with high diffraction efficiency and demonstrated scanning-based imaging of samples with a resolution well below 10 nm. The high NA also allowed projection holographic imaging with strong phase contrast over a large range of magnifications. An error analysis indicates the possibility of achieving 1 nm focusing.
X-ray focusing below 3 nm with aberration-corrected multilayer Laue lenses

J. Lukas Dresselhaus,Margarita Zakharova,Nikolay Ivanov,Holger Fleckenstein,Mauro Prasciolu,Oleksandr Yefanov,Chufeng Li,Wenhui Zhang,Philipp Middendorf,Dmitry Ergov,Ivan de Gennaro Aquino,Henry Chapman,Saša Bajt,Dmitry Egorov,Ivan De Gennaro Aquino,Henry N. Chapman

DOI: https://doi.org/10.1364/oe.518964

IF: 3.8

2024-04-18

Optics Express

Abstract:J. Lukas Dresselhaus, Margarita Zakharova, Nikolay Ivanov, Holger Fleckenstein, Mauro Prasciolu, Oleksandr Yefanov, Chufeng Li, Wenhui Zhang, Philipp Middendorf, Dmitry Egorov, Ivan De Gennaro Aquino, Henry N. Chapman, Saša Bajt Multilayer Laue lenses are volume diffractive optical elements for hard X-rays with the potential to focus beams to sizes as small as 1 nm. ... [Opt. Express 32, 16004-16015 (2024)]

optics
Hard X-ray One Dimensional Nano-Focusing at the SSRF Using a WSi 2 /si Multilayer Laue Lens

Huang Qiu-Shi,Li Hao-Chuan,Song Zhu-Qing,Zhu Jing-Tao,Wang Zhan-Shan,Li Ai-Guo,Yan Shuai,Mao Cheng-Wen,Wang Hua,Yan Fen,Zhang Ling,Yu Xiao-Han,Liu Peng,Li Ming

DOI: https://doi.org/10.1088/1674-1137/37/2/028002

2013-01-01

Abstract:The multilayer Laue lens (MLL) is a novel diffraction optics which can realize nanometer focusing of hard X-rays with high efficiency. In this paper, a 7.9 mu m-thick MLL with the outmost layer thickness of 15 nm is designed based on dynamical diffraction theory. The MLL is fabricated by first depositing the depth-graded multilayer using direct current (DC) magnetron sputtering technology. Then, the multilayer sample is sliced, and both cross-sections are thinned and polished to a depth of 35-41 mu m. The focusing property of the MLL is measured at the Shanghai Synchrotron Facility (SSRF). One-dimensional (1D) focusing resolutions of 205 nm and 221 nm are obtained at E=14 keV and 18 keV, respectively. It demonstrates that the fabricated MLL can focus hard X-rays into nanometer scale.
Hard X-ray Imaging by a Spherical Compound Refractive Lens

Chengchao Huang,Baozhong Mu,Zhanshan Wang,Lingyan Chen,Yury I. Dudchik,Guoqiang Pan

DOI: https://doi.org/10.1016/j.nima.2009.01.218

2009-01-01

Abstract:Hard X-ray imaging by a spherical compound refractive lens is presented. The lens is composed of 123 biconcave microlenses with a size of 200μm in diameter. Each microlens was formed by the epoxy between two bubbles, which were injected into an epoxy-filled glass capillary. The focal length of the lens is 114mm at 8.05keV. The light source was obtained by using a copper anode X-ray tube without a filter. The lens can be achieved a spatial resolution of 5μm with field of view of about 700μm, and 1–3μm resolution may be obtainable by using monochromator and diaphragm.
Research on a Logarithmically Bent Laue Crystal Analyzer for X-ray Monochromatic Backlight Imaging

Yufen Wu,Shali Xiao,Jian Lu,Lifeng Liu,Qingguo Yang,Xianbin Huang

DOI: https://doi.org/10.1063/1.4815549

2013-01-01

Abstract:A new logarithmically bent Laue imaging crystal analyzer (LBLICA) was proposed to obtain the monochromatic image of plasmas and exhibited a great potential for application in the Inertial Confinement Fusion experiment over a large field of view (FOV) and with a high spatial resolution. The imaging geometry of the LBLICA has been discussed. According to the Bragg condition and the equation of the logarithmic spiral, the key image parameters of the crystal analyzer, including the system magnification, the spatial resolution, and the FOV, have been analyzed theoretically. An experiment has been performed with a Cu target X-ray tube as a backlighter to backlight a mesh grid consisting of 50-μm Cu wires, and the monochromatic image of the grid has been obtained with a spatial resolution of approximately 30 μm.
A genetic algorithm to design Laue lenses with optimal performance for focusing hard X- and gamma-rays

Riccardo Camattari,Vincenzo Guidi

DOI: https://doi.org/10.48550/arXiv.1405.7269

2014-05-28

Optics

Abstract:In order to focus hard X- and gamma-rays it is possible to make use of a Laue lens as a concentrator. With this optical tool it would be possible to improve the detection of radiation for several applications, spanning from the observation of the most violent phenomena in the sky to nuclear medicine applications, for diagnostic and therapeutic purposes. A code named LaueGen, based on a genetic algorithm and aimed to designing optimized Laue lenses, has been implemented. The genetic algorithm was selected because the optimization of a Laue lens is a complex and discretized problem. The output of the code consists in the design of a Laue lens composed of diffracting crystals selected and arranged in such a way to maximize the performance of the lens. The code allows one to manage crystals of any material and crystallographic orientation. The program is structured in such a way that the user can control all the initial parameters of the lens. As a result, LaueGen is highly versatile and can be used for the design of very small lens, e.g. for nuclear medicine, to very large lens, e.g. for satellite-borne astrophysical missions.
Angular resolution measurements at SPring-8 of a hard X-ray optic for the New Hard X-ray Mission

D. Spiga,L. Raimondi,A. Furuzawa,S. Basso,R. Binda,G. Borghi,V. Cotroneo,G. Grisoni,H. Kunieda,F. Marioni,H. Matsumoto,H. Mori,T. Miyazawa,B. Negri,A. Orlandi,G. Pareschi,B. Salmaso,G. Tagliaferri,K. Uesugi,G. Valsecchi,D. Vernani

DOI: https://doi.org/10.48550/arXiv.1509.03478

2015-09-11

Instrumentation and Methods for Astrophysics

Abstract:The realization of X-ray telescopes with imaging capabilities in the hard (> 10 keV) X-ray band requires the adoption of optics with shallow (< 0.25 deg) grazing angles to enhance the reflectivity of reflective coatings. On the other hand, to obtain large collecting area, large mirror diameters (< 350 mm) are necessary. This implies that mirrors with focal lengths >10 m shall be produced and tested. Full-illumination tests of such mirrors are usually performed with on- ground X-ray facilities, aimed at measuring their effective area and the angular resolution; however, they in general suffer from effects of the finite distance of the X-ray source, e.g. a loss of effective area for double reflection. These effects increase with the focal length of the mirror under test; hence a "partial" full-illumination measurement might not be fully representative of the in-flight performances. Indeed, a pencil beam test can be adopted to overcome this shortcoming, because a sector at a time is exposed to the X-ray flux, and the compensation of the beam divergence is achieved by tilting the optic. In this work we present the result of a hard X-ray test campaign performed at the BL20B2 beamline of the SPring-8 synchrotron radiation facility, aimed at characterizing the Point Spread Function (PSF) of a multilayer-coated Wolter-I mirror shell manufactured by Nickel electroforming. The mirror shell is a demonstrator for the NHXM hard X-ray imaging telescope (0.3 - 80 keV), with a predicted HEW (Half Energy Width) close to 20 arcsec. We show some reconstructed PSFs at monochromatic X-ray energies of 15 to 63 keV, and compare them with the PSFs computed from post-campaign metrology data, self-consistently treating profile and roughness data by means of a method based on the Fresnel diffraction theory. The modeling matches the measured PSFs accurately.

Mathematical table turning revisited

Hard x-ray broad band Laue lenses (80 - 600 keV): building methods and performances

Recent developments in Laue lens manufacturing and their impact on imaging performance

Expected performances of a Laue lens made with bent crystals

Developing a method for soft gamma-ray Laue lens assembly and calibration

Structure of poly(propyl ether imine) (PETIM) dendrimer from fully atomistic molecular Dynamics Simulation and by Small Angle X-ray scattering

New results on focusing of gamma-rays with Laue lenses

Diffraction Efficiency of Multilayer-Based Laue Lens for Hard X-ray Focusing

Carbon-based Fresnel optics for hard x-ray astronomy

Focusing of Hard X-Rays with Spherical Compound Refractive Lens

Laue gamma-ray lenses for space astrophysics:status and prospects

Development status of the LAUE project

The TRILL project: increasing the technological readiness of Laue lenses

X-Ray Nanometer Focusing at the Ssrf Based on A Multilayer Laue Lens

X-ray focusing with efficient high-NA multilayer Laue lenses

X-ray focusing below 3 nm with aberration-corrected multilayer Laue lenses

Hard X-ray One Dimensional Nano-Focusing at the SSRF Using a WSi 2 /si Multilayer Laue Lens

Hard X-ray Imaging by a Spherical Compound Refractive Lens

Research on a Logarithmically Bent Laue Crystal Analyzer for X-ray Monochromatic Backlight Imaging

A genetic algorithm to design Laue lenses with optimal performance for focusing hard X- and gamma-rays

Angular resolution measurements at SPring-8 of a hard X-ray optic for the New Hard X-ray Mission