Abstract:Geosynthetic-reinforced soil (GRS) retaining walls have been widely adopted in engineering practice based on the development of several design methods. However, the temperature effect, which was proved to be an important influencing factor of retaining wall performance, was not considered in the existing design methods. This study investigates the temperature distributions of a (GRS) wall subjected to freeze–thaw (FT) cycles using (1) a lab-scale physical model test within a custom-made temperature-controlled tank; and (2) a commercial finite-element computer program for conducting numerical modeling. The numerical model was first validated using the lab-scale model test data obtained in this study, and then a full-scale numerical model was created for achieving an in-depth understanding of the temperature distribution behaviors of a real GRS wall subjected to FT cycles. Both model test and numerical results demonstrate that (1) the periodic variation of the ambient temperature during the FT process induces a temperature fluctuation in a sinusoidal shape in the soil, and the temperature distributions of the soil are distinctly related to its location inside the GRS wall; (2) the soil temperature in zones with a distance of 2.0 m to the exposed boundaries (i.e., back of facing panels and road pavement) of the GRS wall is more sensitive to the variation of the ambient temperature. Also, the temperature amplitudes in these regions during each FT cycle are greater than those in the zones far away from the exposed boundaries of the GRS wall; and (3) the frost depth in the vertical direction or frost thickness in the horizontal direction increases constantly with a decrease of the ambient temperature lower than 0°C, and vice versa. The maximum frost depth or thickness behind the GRS wall is lagged to the lowest ambient temperature and decreases with the increase of the distance to the exposed boundaries. In addition, a mathematical model was proposed for predicting the soil temperature amplitudes at different locations inside the GRS wall.

Prediction on lateral deformation of GRS walls using a creep-temperature coupled constitutive model of geosynthetics

Long-term Behavior of GRS Retaining Walls with Marginal Backfill Soils

Evaluation of Prediction Methods for Lateral Deformation of Grs Walls and Abutments

An Analytical Method for Predicting Load Acting on Geosynthetic Overlying Voids

Effects of Relative Creep of Geosynthetic-Reinforcements on the Responses of Geosynthetic MSE Walls

Model test and numerical analysis on long-term mechanical properties of stepped reinforced retaining wall

Evaluation of the off‐axis and on‐axis tensile creep behavior of glass‐fiber reinforced polymer unidirectional lamina

Numerical Evaluation of Long-Term Performance of a Geosynthetic Reinforced Soil Pier and Reinforced Soil Foundation

Effect of Earthquake Type on Dynamic Response of Geosynthetic-Reinforced Soil Walls after Long-Term Creep

Early-age stress analysis of a concrete diaphragm wall through tensile creep modeling

Creep Failure Characteristics and Mathematical Modeling of High-Density Polyethylene Geomembranes under High Stress Levels

Influences of Creep of Cohesive Back-filled Soils on Response of Geosynthetic-reinforced Soil Retaining Walls

Analyzing the deformation and failure of geosynthetic-encased granular soil in the triaxial stress condition

Predictive Model for Creep Behavior of Composite Materials Using Gene Expression Programming

Seismic effects on reinforcement load and lateral deformation of geosynthetic-reinforced soil walls

Temperature Distributions in Geogrid-Reinforced Soil Retaining Walls Subjected to Seasonal Freeze–Thaw Cycles

A New Creep-Fatigue Interaction Model for Predicting Deformation of Coarse-Grained Soil

Predictive Equation for Estimating Lateral Deformation of GRS Abutments

Creep Properties of Expansive Soils under Triaxial Drained Conditions and its Nonlinear Constitutive Model

Drained Creep Test and Creep Model Evaluation of Coastal Soft Clay

Uncertainty Analysis of Creep Behavior of Compacted Loess and a Non-Deterministic Predication Method for Post-Construction Settlement of a High-Fill Embankment