Abstract:Taking Al-2%mole-Cu binary alloy as an example, the influence of grain orientation on competitive growth of dendrites under different competitive modes was investigated by using the three-dimensional (3-D) phase-field method. The result of phase-field simulation was verified by applying cold spray and directional remelting. In the simulation process, two competitive modes were designed: in Scheme 1, the monolayer columnar grains in multilayer columnar crystals had different orientations; while in Scheme 2, they had the same orientation. The simulation result showed that in Scheme 1, the growth of the dendrites, whose orientation had a certain included angle with the direction of temperature gradient, was restrained by the growth of other dendrites whose direction was parallel to the direction of temperature gradient. Moreover, the larger the included angle between the grain orientation and temperature gradient, the earlier the cessation of dendrite growth. The secondary dendrites of dendrites whose grain orientation was parallel to the temperature gradient flourished with increasing included angles between the grain orientation and temperature gradient. In Scheme 2, the greater the included angle between grain orientation and temperature gradient, the easier the dendrites whose orientation showed a certain included angle with temperature gradient inserted between those grew parallel to the temperature gradient, and the better the growth condition thereafter. Some growing dendrites after intercalation were deflected to the temperature gradient, and the greater the included angle, the lower the deflection. The morphologies of the competitive growth dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the two modes of competitive growth of dendrites characterized in the simulation do exist and frequently appear in practical solidification processes.

Phase-field model for grain boundary grooving in multi-component thin films

Phase-field simulations of grain boundary grooving under diffusive-convective conditions

Phase-field model of isothermal solidification in multicomponent alloys for multiple grains

Phase-Field Model of Isothermal Solidification of Binary Alloy with Multiple Grains

Phase-Field Model of Isothermal Solidification with Multiple Grain Growth

Multi-Phase Field Simulation of Grain Growth in Multiple Phase Transformations of A Binary Alloy

Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Grain boundary grooving in thin film under the influence of an external magnetic field: A phase-field study

New phase-field model for polycrystalline systems with anisotropic grain boundary properties

Simulation of Isothermal Solidification of Multi-Component Alloys with Phase-Field Method

Arrangement and Decomposition of Grain Boundary Dislocations: Two-Mode Phase-Field Crystal Simulation

Phase-Field Modeling of Stored-Energy-Driven Grain Growth with Intra-Granular Variation in Dislocation Density

Modeling Grain Boundaries using a Phase Field Technique

Phase Field Simulation Research on the Microstructural Evolution of Monocrystalline and Polycrystalline Silicon

Characterizing Solute Segregation and Grain Boundary Energy in a Binary Alloy Phase Field Crystal Model

A defect-chemistry-informed phase-field model of grain growth in oxide electroceramics

Segregation-assisted spinodal and transient spinodal phase separation at grain boundaries

Phase Precipitation on Grain Boundaries in Binary Alloys: A Monte-Carlo Approach

Simulation of Multi-Grain Solidification and Subsequent Spinodal Decomposition by Using Phase Field Crystal Model