Abstract:The aim of this thesis was to identify ways in which the velocity of a track cyclist could be increased, primarily through the reduction of aerodynamic drag, and to determine which factors had the most significant impact on athlete performance. An appropriate test method was set up in the wind tunnel at the University of Canterbury to measure the aerodynamic drag of different cycling positions and equipment, including helmets, skinsuits, frames and wheels, in order to measure the impact of specific changes on athlete performance. Rather than comparing standard cycling positions, such as the Obree, dropped, upright and aero positions, a number of individual and multiple changes were made to the height, width and length of the handlebars, seat height, head and helmet position, and hand position to provide a rank of importance in terms of which changes had the greatest impact (gain or loss) on the aerodynamic drag. A mathematical model of the Individual Pursuit (IP) event was also created to calculate the velocity profile and finishing time for athletes competing under different race conditions. The model was created in Microsoft Excel and used first principles to analyse the forces acting on a cyclist, which lead to the development of equations for power supply and demand. The model included the effects of leaning in the bends, and used SRM power data to determine the actual position of the rider on the track. The mathematical model was validated using SRM data for eleven, elite track cyclists, and was found to be accurate to 0.31s (0.16%). An analysis of changes made to the bike, athlete, and environmental conditions using the mathematical model showed that the drag area and air density had the greatest impact on the finishing time. As the air density is fixed for all athletes competing in the same race, these results suggest that athletes should focus on minimising their drag area in order to maximise performance. The model was then used to predict the finishing times for different pacing strategies by generating different power profiles for a given athlete with a fixed stock of energy (the work done remained the same for all generated power profiles) in order to identify the optimal pacing strategy for the IP. A comparison of the predicted finishing times for the different pacing strategies showed that an all-out and even or all-out and variable strategy with an initial acceleration phase of 12s resulted in the fastest finishing time for a male, IP athlete with a fixed stock of energy whose efficiency is not a function of power output or speed. The length of time spent in the initial acceleration phase was found to have a significant impact on the results, although all strategies simulated with an initial acceleration phase resulted in a faster finishing time than all other strategies simulated. Results from the wind tunnel tests also showed that, in general, changes made to the position of the cyclist had the greatest impact on the aerodynamic drag compared to changes made to the equipment. Multiple changes in position had a greater impact on drag than individual changes in position, but the changes were not additive; the total gain or loss in drag for multiple changes in position was not the sum of individual gains or losses in drag. Actual gains and losses also varied significantly between athletes, primarily due to differences in body size and shape, riding experience, and reference position from which changes were made from. However, certain changes in position or equipment had a significant impact (>±1%) on the drag of all athletes tested compared to the reference position. For example, by wearing a shoe cover all athletes showed a reduction in drag of >1% regardless of shoe, cleat or pedal worn. Changes in position that resulted in a reduction of the frontal area, such as lowering the handlebars and head, were the most successful at reducing the aerodynamic drag, and a change in skinsuit was found to have the greatest impact on drag out of all equipment changes, primarily due to the choice of material and seam placement. The mathematical model was used to quantify the impact of changes in position and equipment made in the wind tunnel on the overall finishing time for a given athlete competing in an IP event. Time savings of up to 8 seconds were seen for

The Effects of Temperature, Humidity and Barometric Pressure on Short Sprint Race Times

A Model for Determining the Effect of the Wind Velocity on 100 m Sprinting Performance

A realistic quasi-physical model of the 100 metre dash

"Back-of-the-envelope" wind and altitude correction for 100 metre sprint times

Sprint Running Performance Monitoring: Methodological and Practical Considerations

Evaluation of The Final Time and Velocity of a 100 m Run Under the Realistic Conditions

Effects of altitude on performance of elite track-and-field athletes

Modelling the optimization of world-class 400 m and 1,500 m running performances using high-resolution data

On the performance of Usain Bolt in the 100 metre sprint

Air speed and direction affect metabolic and thermoregulatory responses during walking and running in a temperate environment

Wasted efforts of elite Marathon runners under a warming climate primarily due to atmospheric oxygen reduction

Effects of the Flying Start on Estimated Short Sprint Profiles Using Timing Gates

Aerodynamics of Track Cycling

Associations between environmental factors and running performance: An observational study of the Berlin Marathon

How to run 100 meters ?

Modeling sprint cycling using field-derived parameters and forward integration

9.58 and 10.49: Nearing the Citius End for 100 m?

How 100-m event analyses improve our understanding of world-class men's and women's sprint performance

The impact of technology on sporting performance in Olympic sports

Heat stress and the velocity-duration relationship in amateur runners

Optimal Pacing for Running 400 m and 800 m Track Races