All-optical probe of precessional magnetization dynamics in exchange biased NiFe/FeMn bilayers

M.C. Weber,H. Nembach,B. Hillebrands,J. Fassbender

DOI: https://doi.org/10.48550/arXiv.cond-mat/0507475

2005-07-20

Abstract:An internal anisotropy pulse field is launched by an 8.3 ps short laser excitation, which triggers precessional magnetization dynamics of a polycrystalline NiFe/FeMn exchange bias system on the picosecond timescale. Due to the excitation the unidirectional anisotropy and, thus, the exchange coupling across the interface between the ferromagnetic and the antiferromagnetic layer is reduced, leading to a fast reduction of the exchange bias field and to a dramatic increase of the zero-field susceptibility. The fast optical unpinning is followed by a slower recovery of the interfacial exchange coupling dominated by spin-lattice and heat flow relaxation with a time constant of the order of 160 ps. The measured picosecond time evolution of the exchange decoupling and restoration is interpreted as an anisotropy pulse field giving rise to fast precessional magnetization dynamics of the ferromagnetic layer. The strength of the internal pulse field and even the initial magnetization deflection direction from the equilibrium orientation can be controlled by the absorbed photons. The dependence of the effective Gilbert damping on both small and large angle precessional motion was studied, yielding that both cases can be modeled with reasonable accuracy within the Landau-Lifshitz and Gilbert framework.

Materials Science

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to evaluate the atmospheric turbulence characteristics, especially seeing and isoplanatic angle, of the astronomical observation site in Dome C, Antarctica, under summer conditions. Specifically, the research aims to:

1. **Measure seeing**: Continuously monitor the bright star Canopus using a Differential Image Motion Monitor (DIMM) to obtain seeing data. Seeing refers to the degree of degradation in the imaging resolution of celestial bodies due to atmospheric turbulence, and is usually expressed in arcseconds. The study found that the median seeing at the Dome C site during summer days reached 0.54″, and in the late afternoon each day, the seeing would drop to about 0.4″.

2. **Measure the isoplanatic angle**: The isoplanatic angle is an important parameter in adaptive optics systems, which describes the maximum angular distance between two point sources subject to the same wavefront distortion. The research measured the isoplanatic angle through specific techniques and found that its median value in the visible light band was 6.8″, far superior to other observatories.

3. **Analyze the contribution of surface - layer turbulence**: By installing DIMM devices at different heights (3 meters and 8 meters) simultaneously, the research team analyzed the impact of surface - layer turbulence on seeing. The results showed that almost half of the surface turbulence energy was concentrated within 5 meters from the ground.

### Formula Summary

- **Relationship between seeing and Fried parameter**:
\[
\epsilon = 0.98\frac{\lambda}{r_0}
\]
where \(\epsilon\) is seeing, \(\lambda\) is the wavelength, and \(r_0\) is the Fried parameter.

- **Turbulence Energy Ratio (TER)**:
\[
\text{TER}=\frac{\int_{3m}^{8m}C_n^2(h)\,dh}{\int_{3m}^{\infty}C_n^2(h)\,dh}
\]
or calculated through the Fried parameter:
\[
\text{TER}=\frac{r_0(3m)^{-5/3}-r_0(8m)^{-5/3}}{r_0(3m)^{-5/3}}
\]

### Conclusion

The research results show that the Dome C site has exceptionally excellent atmospheric conditions in summer, especially in terms of seeing and isoplanatic angle, making this site an ideal location for high - resolution astronomical observations. These results provide an important reference for further winter observations and verify the great potential of Dome C as a world - class astronomical observatory.