Abstract:Due to unavoidable compliance in the drive trains of the individual links, all industrial robots exhibit some elasticity in their respective joints. This elasticity causes a discrepancy between the measured motor position and the actual link position of the robot. For highly dynamic movements of the robot, or in the case of heavy payloads, this can lead to significant deviations between the desired and actual end-effector pose of the robot. One approach to mitigate the resulting task performance degradation is using suitable state estimation strategies for elastic-joint robots. While critical for task performance, the link positions are typically not separately measured for industrial robots. Instead, standard robot control systems rely on the measured motor positions. To this end, this work studies the state estimation problem of elastic-joint industrial robots and compares the performance of different observers. The comparison is performed on an industrial robot with six degrees of freedom (6-DOF) using a laser tracker measurement of the end-effector movement as a ground truth. Four observer concepts are state-of-the-art strategies from the literature, which are briefly summarized first. Subsequently, two novel estimation strategies are proposed. The first exploits encoder and angular velocity measurements, and the second is an estimator that combines encoder, acceleration, and angular velocity measurements. To the best of the authors' knowledge, this is the first work that compares the performance of real-time observers for elastic-joints industrial robots with 6-DOF in an experimental setup. The properties of all observers are discussed in terms of estimation accuracy, sensor configuration, computational complexity, and required knowledge of model parameters. The experiments show that the novel estimation strategies improve the position estimation accuracy of the end-effector by up to 72 %.

A Luenberger-style Observer for Robot Manipulators with Position Measurements

A Globally Exponentially Stable Observer for Torque Estimation with Only Position Measurement

Exponential Tracking Control of Robotic Manipulators with Uncertain Dynamics and Kinematics

Observer-Based Output Feedback Tracking Control for Flexible Joint Space Manipulator with Output Constraints

Observer-based friction compensation in heavy-duty parallel robot control

A Robust Observer Design for A Flexible Manipulator Based on A Pde Model

Observer-Based Fault-Tolerant Control for Uncertain Robot Manipulators without Velocity Measurements

Tracking control of robot manipulators actuated by brushless DC motors: Elimination of joint velocity measurements with a robust observer

Stability Analysis of Nonlinear Dynamic System with Linear Observer for a Multilink Flexible Manipulator

Dynamic Modeling and Infinite-Dimensional Observer-Based Control for Manipulation of Flexible Beam by a Multi-Link Robot

Nonlinear PDE Observer Design for a Flexible Two-Link Manipulator

Adaptive controller-observer design for 6-DOF parallel manipulators

Force Estimation and Motion Control of Hydraulic Manipulators Based on Extended State Observer

Real-time observer designs for elastic-joint industrial robots: Experimental comparison and new strategies

Observer-based Stabilization of One-Sided Lipschitz Systems with Application to Flexible Link Manipulator

Full State Estimation of Continuum Robots from Tip Velocities: A Cosserat-Theoretic Boundary Observer

Disturbance Estimation for High-Degree-of-Freedom Euler-Lagrangian Systems Using Sliding Mode Observer without Matching Conditions

The Kinetics Observer: A Tightly Coupled Estimator for Legged Robots

Observer based output feedback repetitive learning control of robotic manipulators

Observer Design for A Flexible-Link Manipulator with Pde Model

Observer-Based Neural Control of $N$-Link Flexible-Joint Robots