Use of Plackett–Burman Statistical Design to Study Factors Acting on the Nitric Acid Leaching of Rare Earth Elements from Moroccan Phosphogypsum

Fatima Asafar,Marouane Amine,Abdelkader Outzourhit,Latifa Bilali,Mehdi Nadifiyine
DOI: https://doi.org/10.1155/2024/1311327
2024-09-23
Journal of Chemistry
Abstract:This work is an attempt to understand and optimize the rare earth elements leaching from Moroccan phosphogypsum using a nitric acid solution. The Plackett–Burman statistical design was used to identify the statistically significant factors responsible for the optimum leaching conditions. With this purpose, the following seven variables were studied: nitric acid concentration (X 1 ), solid‐to‐liquid ratio (X 2 ), temperature (X 3 ), leaching time (X 4 ), stirring speed (X 5 ), drying (X 6 ), and particle size (X 7 ). Given that the leaching recovery of rare earth elements is limited by the quantity of dissolved phosphogypsum, we examined two simultaneous responses, namely, the leaching efficiency of rare earth elements Y REEs and the leaching efficiency of calcium Y Ca (dissolution rate of phosphogypsum). The predicted values of the two fitted models were in good agreement with the experimental values by a coefficient of determination (R 2 ) equal to 98.6% and 96.50%, respectively. In the model of Y REEs , only the effect of drying was found to be statistically insignificant with a p‐value greater than 0.05. Nitric acid concentration, solid‐to‐liquid ratio, and temperature are the only variables having a statistically significant effect in the model of Y Ca . At a dissolution rate of phosphogypsum equal to 30.13%, the leaching efficiency of rare earth elements from our sample has reached a maximum of 87.55%. The optimal experimental conditions are a nitric acid concentration of 3.3 M, a solid‐to‐liquid ratio of 1/9, a temperature of 75°C, a leaching time of 20 min, a stirring speed of 200 rpm, and d ≤ 100 μm as a particle size.
chemistry, multidisciplinary
What problem does this paper attempt to address?