Abstract:Magnetic nanoparticles (MNPs) have many applications which require MNPs to be captured and immobilized for their manipulation and sensing. For example, MNP sensors based on detecting changes to the ferromagnetic resonances of an antidot nanostructure exhibit better performance when the nanoparticles are captured within the antidot inclusions. This study investigates the influence of microfluidics upon the capture of MNPs by four geometries of antidot array nanostructures hollowed into 30 nm-thick Permalloy films. The nanostructures were exposed to a dispersion of 130 nm MNP clusters which passed through PDMS microfluidic channels with a 400 {\mu}m circular cross-section fabricated from wire molds. With the microfluidic flow of MNPs, the capture efficiency - the ratio between the number of nanoparticles captured inside of the antidot inclusions to the number outside the inclusions - decreased for all four geometries compared to previous results introducing the particles via droplets on the film surface. This indicates that most MNPs were passing over the nanostructures, since there were no significant magnetophoretic forces acting upon the particles. However, when a static magnetic field is applied, the magnetophoretic forces generated by the nanostructure are stronger and the capture efficiencies are significantly higher than those obtained using droplets. In particular, circular antidots demonstrated the highest capture efficiency among the four geometries of almost 83.1% when the magnetic field is parallel to the film plane. In a magnetic field perpendicular to the film, the circle antidots again show the highest capture efficiency of about 77%. These results suggest that the proportion of nanoparticles captured inside antidot inclusions is highest under a parallel magnetic field. Clearly, the geometry of the nanostructure has a strong influence on the capture of MNPs.

Upgrading Pulse Detection with Time Shift Properties Using Wavelets and Support Vector Machines

Numerical analysis of microfluidic magnetic bead separation utilizing an integrated array of magnetic elements magnetized by a homogenous bias field

Magnetic Bead—Magic Bullet

Numerical Studies on the Motions of Magnetically Tagged Cells Driven by a Micromagnetic Matrix

In Situ Analysis of Capturing Dynamics of Magnetic Nanoparticles in A Microfluidic System

External magnetic fields enhance capture of magnetic nanoparticles flowing through molded microfluidic channels by ferromagnetic nanostructures

Synthesis and active manipulation of magnetic liquid beads

Magnetocapillary Swimmers

Numerical analysis of magnetic nanoparticle transport in microfluidic systems under the influence of permanent magnets

From an obliquely falling rod in a viscous fluid to the motion of suspended magnetic bead chains that are driven by a gradient magnetic field and that make an arbitrary angle with the magnetic force vector: A Stokes flow study

Field-induced macroscopic flow of a dilute self-assembling magnetic colloid under rotating magnetic fields

Magnetic Bead Manipulation in Microfluidic Chips for Biological Application

Transport efficiency of biofunctionalized magnetic particles tailored by surfactant concentration

Combined funnel, concentrator, and particle valve functional element for magnetophoretic bead transport based on engineered magnetic domain patterns

Mixing characteristics of a bubble mixing microfluidic chip for genomic DNA extraction based on magnetophoresis: CFD simulation and experiment

Modelling and simulation of particle-particle interaction in a magnetophoretic bio-separation chip

On-Demand Coalescence of Ferromagnetic Droplets in Microchannels Using an Oscillating Magnetic Field

Magnetophoresis in Microfluidic Applications: Influence of Magnetic Convection in Hydrodynamic Fields

Digital Microfluidics: Magnetic Transportation And Coalescence Of Sessile Droplets On Hydrophobic Surfaces

Capture Assisted by Buoyancy: Monte Carlo Simulation of Protein Separation