Abstract:Semiconductor photodetectors can work only in specific material-dependent light wavelength ranges, connected with the bandgaps and absorption capabilities of the utilized semiconductors. This limitation has driven the development of hybrid devices that exceed the capabilities of individual materials. In this study, for the first time, a hybrid heterojunction photodetector based on methylammonium lead bromide (MAPbBr3) polycrystalline film deposited on gallium arsenide (GaAs) was presented, along with comprehensive morphological, structural, optical, and photoelectrical investigations. The MAPbBr3/GaAs heterojunction photodetector exhibited wide spectral responsivity, from 540 to 900 nm. The fabrication steps of the prototype device, including a new preparation recipe for the MAPbBr3 solution and spinning, will be disclosed and discussed. It will be shown that extending the soaking time and refining the precursor solution's stoichiometry may enhance surface coverage, adhesion to the GaAs, and film uniformity, as well as provide a new way to integrate MAPbBr3 on GaAs. Compared to the pristine MAPbBr3, the enhanced structural purity of the perovskite on GaAs was confirmed by X-ray Diffraction (XRD) upon optimization compared to the conventional glass substrate. Scanning Electron Microscopy (SEM) revealed the formation of microcube-like structures on the top of an otherwise continuous MAPbBr3 polycrystalline film, with increased grain size and reduced grain boundary effects pointed by Energy-Dispersive Spectroscopy (EDS) and cathodoluminescence (CL). Enhanced absorption was demonstrated in the visible range and broadened photoluminescence (PL) emission at room temperature, with traces of reduction in the orthorhombic tilting revealed by temperature-dependent PL. A reduced average carrier lifetime was reduced to 13.8 ns, revealed by time-resolved PL (TRPL). The dark current was typically around 8.8 × 10-8 A. Broad photoresponsivity between 540 and 875 nm reached a maximum of 3 mA/W and 16 mA/W, corresponding to a detectivity of 6 × 1010 and 1 × 1011 Jones at -1 V and 50 V, respectively. In case of on/off measurements, the rise and fall times were 0.40 s and 0.61 s or 0.62 s and 0.89 s for illumination, with 500 nm or 875 nm photons, respectively. A long-term stability test at room temperature in air confirmed the optical and structural stability of the proposed hybrid structure. This work provides insights into the physical mechanisms of new hybrid junctions for high-performance photodetectors.

High-performance Self-powered Photodetector Based on Concentric Annular α-FAPbI3/MAPbI3 Single Crystals Lateral Heterojunction with Broadband Detectivity

Self‐Powered and Flexible Photodetector with High Polarization Sensitivity Based on MAPbBr3–MAPbI3 Microwire Lateral Heterojunction

A Self‐Powered Photodetector Based on MAPbI 3 Single‐Crystal Film/n‐Si Heterojunction with Broadband Response Enhanced by Pyro‐Phototronic and Piezo‐Phototronic Effects

Perovskite Heterojunction Based on Ch3nh3pbbr3 Single Crystal for High-Sensitive Self-Powered Photodetector

High-Performance Broadband Photodetectors Combining Perovskite and Organic Bulk Heterojunction Bifunctional Layers

3D‐Heterojunction based on Embedded Perovskite Micro‐sized Single Crystals for Fast Photomultiplier Photodetectors with Broad/narrowband Dual‐mode

Solution‐Grown Large‐Sized Single‐Crystalline 2D/3D Perovskite Heterostructure for Self‐Powered Photodetection

A Design Strategy for Low‐Cost Single/Dual‐Band Photodetector: Bulk Heterojunction and Interface Engineering

High-Performance Self-Powered Photodetector Based on the Lateral Photovoltaic Effect of All-Inorganic Perovskite CsPbBr 3 Heterojunctions

In Situ Solution-Grown Halide Perovskite Single Crystals with Epitaxial Heterojunction Structures for Efficient Photodetection

A Self-Powered Photodetector Based on a CH3NH3PbI3single Crystal with Asymmetric Electrodes

Solution‐Processed Monolithic CH3NH3PbI3/PbI2 Vertical Heterostructure for High‐Performance Flexible and Broadband Photodetector

A High‐Performance Photodetector Based on 1D Perovskite Radial Heterostructure

High-Performance Planar-Type Photodetector on (100) Facet of MAPbI 3 Single Crystal

A High‐Performance Self‐Powered Photodetector Based on MAPbBr 3 Single Crystal Thin Film/MoS 2 Vertical Van Der Waals Heterostructure (Adv. Mater. Interfaces 27/2022)

Physical Properties of an Efficient MAPbBr3/GaAs Hybrid Heterostructure for Visible/Near-Infrared Detectors

Solution-processed MAPbI 3 /Cs 2 AgBiBr 6 heterostructure through epitaxial growth for broadband photo-detection

High-performance photodetector based on two-dimensional perovskite crystals with alternating interlayer cations

High-Performance Planar-Type Photodetector on (100) Facet of MAPbI3 Single Crystal

All‐Inorganic CsPbBr 3 Perovskite Nanocrystals/2D Non‐Layered Cadmium Sulfide Selenide for High‐Performance Photodetectors by Energy Band Alignment Engineering

Self‐Powered Photodetector Based on Perovskite/NiOx Heterostructure for Sensitive Visible Light and X‐Ray Detection