High-speed particle self-rotation in different pre-self-rotation cyclones and application in enhancement of oil recovery from spent catalysts

Tingting Cheng,Qiqi Li,Hualin Wang,Xiangchen Fang,Liquan Li,Lai Jiang,Jianping Li,Yuan Huang,Tao Yang,Pengbo Fu

DOI: https://doi.org/10.1016/j.seppur.2022.121430

IF: 8.6

2022-09-01

Separation and Purification Technology

Abstract:As a typical hazardous waste in the petrochemical industry, the spent catalysts contain a large amount of oil, which will lead to waste of resources and serious environmental pollution if not effectively recycled. In this study, four kinds of inlet particle pre-self-rotation cyclones were designed for efficient separation and recovery of oil trapped in the pores of the spent porous catalyst through high-speed particle self-rotation in cyclones. The effects of pre-self-rotation on particle revolution and high-speed self-rotation were studied using a high-speed motion analyzer (HSMA). When the inlet flow rate was 40 m3/h, the particle self-rotation speed at the axial position of z = 200 mm in common cyclone (CM-C) and parallel positive rotation cyclone (PPR-C) was 2572 and 6658 rad/s, respectively. At the normal temperature, the oil content after oil recovery by CM-C was reduced from 31.18% to 8.96%, while in PPR-C it can be reduced to 5.29%. This study provides a new approach for regulating particle self-rotation in cyclones and enhancing the oil recovery from the spent porous catalyst through high-speed particle self-rotation.

engineering, chemical