Abstract:Abstract In this work, the high‐strength steel (HSS) sheet dual‐phase 440 (DP440) were conducted to establish the forming limit curve (FLC) and analytical forming limit stress curve (FLSC) obtained from experimental forming limit curve. First, the Nakajima stretch forming examination was carried out to obtain forming limit curve of investigated sheet. Afterwards, the theoretical Marciniak–Kuczinsky (M–K) model was developed and calculated to evaluate localized necking limits both in strain and stress spaces combination with anisotropic yield criteria. Then, the analytical forming limit stress curves were plastically calculated by using experimental forming limit curve data combination with Swift hardening model and anisotropic yield criteria namely, Hill’48 and Yld2000‐2d for representing anisotropic plastic deformation behavior on examined steel sheet. Finally, automotive stamping parts were performed in order to verify an applicability of all developed curves. It was observed that the analytical forming limit stress curves could more precisely predict the formability of automotive parts better than the forming limit curve based on strain. Particularly, the one based on Yld2000‐2d predict better than the one based on Hill’48. Simultaneously, the experimental forming limit curve and analytical forming limit stress curve were also evaluated comparing with the theoretical calculated forming limit curve and forming limit stress curve using the Marciniak–Kuczinsky model. It should be noted again that the experimental forming limit curve and analytical forming limit stress curve are the best one. Therefore, the Yld2000‐2d yield function better represented the anisotropic behavior of the high‐strength steel sheet dual‐phase 440 than Hill′ 48 yield function, and can suitable be used for the analysis prediction and design of bumper automotive parts under forming processes.

High Strength Steel Sheets for Automobile Suspension and Chassis Use—High Strength Hot-Rolled Steel Sheets with Excellent Press Formability and Durability for Critical Safety Parts—

Research on Microstructure and Property of Hot-Rolled 700MPa Grade Automobile Sheet

New Trends in Advanced High Strength Steel Developments for Automotive Application

Automotive Steel with a High Product of Strength and Elongation used for Cold and Hot Forming Simultaneously

New developments of advanced high-strength steels for automotive applications

Research and development of steel for ultra-light automotive

The 3rd Generation Automobile Sheet Steels Presenting with Ultrahigh Strength and High Ductility

Microscopic Structure and Mechanical Property of AHSS

Formability prediction of high‐strength steel sheet using experimental, analytical and theoretical analysis based on strain and stress forming limit curves and its application to automotive forming parts

Effect of hot/warm rolling on the microstructures and mechanical properties of medium-Mn steels

Development and Production of Ultra-High Strength Linepipes With Dual-Phase Microstructure for High Strain Application

NEW HIGH STRENGTH STEEL FOR BOLTS WITH TENSILE STRENGTH OVER 1300 MPa

Developing Ultra‐High Strength Bainitic Steel by Hot Stamping Process and Anisothermal Holding

Design and development of precipitate strengthened advanced high strength steel for automotive application

Hot forming technology of automotive high strength steel sheet stamping part

Application of the High Strength Steel in the Automobile

Assessment of the Hardening Behavior and Tensile Properties of a Cold-Rolled Bainitic-Ferritic Steel

Progress and Perspective of Ultra-High-Strength Martensitic Steels for Automobile

Development of high strength steel sheet with improved strainhardenability for automotive application

Formation of Heterogeneous Nucleation of B2-NiAl in Hot Rolled Fe-Mn-Al-C Plate: A Novel Composition and Processing Route for Lightweight High Strength Steel Containing Nickel

Microstructure, Precipitation and Mechanical Properties of a Titanium-Tungsten Alloyed Hot Rolled High Strength Steel