Abstract:Nanoscale zerovalent iron (nZVI/nFe0) has high reactivity and low selectivity toward target contaminant, thus their synchronous mediation is of great significance but challenging so far. Herein, the nZVI confined under the porous carbon (i.e., ) was successfully developed via a one-step carbothermal reductive strategy using the renewable hydrochar and and Fe(NO3)3 as precursors. The physicochemical properties of composites were systematically characterized by multiple morphological, structural and electrochemical methods, e.g., SEM, TEM, FTIR, XRD, Raman, and LSV, etc.. When the carbothermal temperature was ≥600 oC, it was found that the well-dispersed iron onto the hydrochar could be reduced in situ into iron nanoparticles. Accompanied by the evolution of the porous carbon (PC) with excellent adsorptivity, the removal of the nitrobenzene (NB) by the composite was increasingly enhanced from 4.7% to 74.3% at 6 h with increasing the carbothermal temperature from 300 °C to 800 °C. Especially for the (i.e., carbothermal temperature is 800 °C), the NB was mainly adsorbed by in first 6 h and subsequently reduced to aniline (AN). Besides, the exhibited hydrophobicity with a water contact angle (WCA) of 131.4° that was higher than the commercial nZVI with a WCA of 37.1°. Meanwhile, the PC introduction could enhance the corrosion resistance of nFe0 with the nontarget H2O/O2. In general, the carbon-based confinement should a promising alternation to improve the reactivity and selectivity of nZVI-based technology for water decontamination.

What problem does this paper attempt to address?

This paper aims to address the challenges faced by nano - zero - valent iron (nZVI or nFe\(^0\)) in water treatment applications. Specifically, the researchers are concerned with how to simultaneously regulate the reactivity and selectivity of nZVI towards target pollutants (such as nitrobenzene, NB), which is of great significance but also extremely challenging in practical applications. Due to its high reactivity, nZVI is prone to react with non - target pollutants (such as O\(_2\), H\(_2\)O/H\(^+\), etc.), resulting in a decrease in its persistence and efficiency in the environment. In addition, the traditional liquid - phase reduction method for preparing nZVI has the problems of high cost and the use of toxic reagents, which limits its large - scale application. To solve these problems, the researchers developed an nZVI composite material (i.e., PC@Fe) coated with porous carbon (PC), which was prepared by a one - step carbothermal reduction strategy. This method uses renewable hydrothermal carbon and Fe(NO\(_3\))\(_3\) as precursors to synthesize a series of PC@Fe composite materials at different carbothermal temperatures. Studies have shown that as the carbothermal temperature increases, the removal rate of nitrobenzene by the composite material significantly increases, especially PC@Fe - 800 prepared at 800 °C, which has the best removal effect on nitrobenzene. PC@Fe - 800 not only exhibits good adsorption performance, but can also effectively reduce the adsorbed nitrobenzene to aniline (AN), while improving the corrosion resistance of nZVI to non - target pollutants (such as water and oxygen), thereby improving its selective reduction ability towards target pollutants. Overall, this study proposes a simple, low - cost and environmentally - friendly method for preparing nZVI - based composite materials with high reactivity and selectivity, providing a new technical approach for water pollution control.

Mediating the reactivity and selectivity of nanoscale zerovalent iron toward nitrobenzene under porous carbon confinement

Nanoscale zero-valent iron supported on biochar for the highly efficient removal of nitrobenzene

Mechanochemical Synthesis of Nitrogen-Modified Microscale Zero-Valent Iron for Efficient Cr(VI) Removal: the Role of Lattice Strain

Carbon coating enhances single-electron oxygen reduction reaction on nZVI surface for oxidative degradation of nitrobenzene

Nanoscale Zero-Valent Iron Modified by Bentonite with Enhanced Cr(VI) Removal Efficiency, Improved Mobility, and Reduced Toxicity

Electrochemically Mediated Nitrate Reduction on Nanoconfined Zerovalent Iron: Properties and Mechanism

Investigate the multipath erasure of nitrobenzene over nanoscale zero-valent-iron/N-doped biochar hybrid with extraordinary reduction performance

Feasibility of nanoscale zerovalent iron-loaded sediment-based biochar (nZVI-SBC) for simultaneous removal of nitrate and phosphate: high selectivity toward dinitrogen and synergistic mechanism

One-Pot Synthesis of Nanoscale Zero-Valent Iron Immobilized with Granular Activated Carbon

Biochar-supported nanosized zero-valent iron (nZVI/BC) composites for removal of nitro and chlorinated contaminants

Surfactant-enhanced reduction of soil-adsorbed nitrobenzene by carbon-coated nZVI: Enhanced desorption and mechanism

Reduction of Nitrobenzene in Aqueous and Soil Phases Using Carboxymethyl Cellulose Stabilized Zero-Valent Iron Nanoparticles

High stability and reactivity of porous calcium tartrate supported nano zero-valent iron in aerobic environment and alkaline wastewater

Highly stable carbon-coated nZVI composite Fe0@RF-C for efficient degradation of emerging contaminants

Activation of Zero-Valent Iron Through Ball-Milling Synthesis of Hybrid Fe0/Fe3O4/FeCl2 Microcomposite for Enhanced Nitrobenzene Reduction.

Calcium Hydroxide Coating on Highly Reactive Nanoscale Zero-Valent Iron for in Situ Remediation Application

Efficient and Reductive Removal of Bromate Using a Novel and Stable Nanoscale Zero-Valent Iron Embedded in N-doped Carbon Derived from Metal-Organic Frameworks

Zero-Valent Iron Nanoparticles With Sustained High Reductive Activity For Carbon Tetrachloride Dechlorination

Dual-supported nanoscale zero-valent iron for As(III) contaminated groundwater remediation

Enhanced selective nitrate-to-nitrogen reduction by aerosol-assisted iron–carbon composites: Insights into the key factors

Efficient Nitrate Removal Using Micro‐electrolysis with Zero Valent Iron/activated Carbon Nanocomposite