Abstract:A novel bifunctional magnetic sorbent with mercapto and amino groups and ion imprinting (MBII) was synthesized using a one-step aqueous sol-gel process for preconcentration and determination of Cd(II) ions.MBII was employed as a microcolumn (MC) filler in a flow-through system coupled to GFAAS. The magnetic properties of the solid allowed to perform a microcolumn magnetic solid-phase extraction (MCMSPE) by simply including a single circular magnet around the MC. This assembly enabled complete attachment of the solid to the MC wall leaving a central void to facilitate higher sample flow rates without blockage or material loss. For comparison, a bifunctional magnetic solid without imprinting (MBNI) was also synthesized and evaluated. Both MBII and MBNI were characterized by FTIR, SEM,EDX, BET and magnetization measurements. The results showed the preservation of the magnetic core, its superparamagnetism and the functional groups in the solid. Batch studies revealed. a maximum adsorption capacity for both materials at pH around 6 with equilibrium reached within 5 minutes. The advantages were reflected in the maximum adsorption capacity of MBII, which was found to be 2.5 times greater than MBNI. Both adsorbents were compared as MC fillers for dynamic preconcentration in MCMSPE systems. Under optimized conditions, MBNI showed a PCF of 125 and MBII of 250. The higher selectivity of MBII was corroborated by interfering ions studies. The analytical performance parameters for the proposed method using MBII as adsorbent showed a detection limit of 0.05 ng L-1, a linear range of 2.0-80 ng L-1, RSD% of 2.2 (n=7; 20 ng L-1) and a lifetime of more than 300 preconcentration-elution cycles without loss of sensitivity or need for refilling. The method was successfully applied to the determination of trace Cd(II) in osmosis, lake and tap water with recoveries ranging from 98 to 105%. Comparison of these results with similar reported methods showed a considerable improvement primarily attributed to the combined effect of MBII's higher retention capacity and its magnetic properties that allowed higher sample flow rates and thus, enhanced figures of merit.

Bifunctional magnetic nanoparticles with ion imprinting for improving the flow through determination of ultratraces of Cd(II) using magnetic preconcentration

Synthesis and Application of Novel Magnetic Ion-Imprinted Polymers for Selective Solid Phase Extraction of Cadmium (II)

Mercaptobenzothiazole-Functionalized Magnetic Carbon Nanospheres of Type Fe3o4@Sio2@C for the Preconcentration of Nickel, Copper and Lead Prior to Their Determination by Icp-Ms

An ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique combined with a sol-gel process for selective solid-phase extraction of cadmium(II)

Adsorption studies of cadmium onto magnetic Fe3O4@FePO4 and its preconcentration with detection by electrothermal atomic absorption spectrometry

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Solid-phase extraction and preconcentration of cadmium(II) in aqueous solution with Cd(II)-imprinted resin (poly-Cd(II)-DAAB-VP) packed columns

Solid phase extraction and trace monitoring of cadmium ions in environmental water and food samples based on modified magnetic nanoporous silica

Solid-phase preconcentration of cadmium(II) using amino-functionalized magnetic-core silica-shell nanoparticles, and its determination by hydride generation atomic fluorescence spectrometry

Magnetic metal-organic frameworks for the extraction of trace amounts of heavy metal ions prior to their determination by ICP-AES

Solid phase extraction of heavy metal ions based on a novel functionalized magnetic multi-walled carbon nanotube composite with the aid of experimental design methodology

A Novel Magnetic Cd(II) Ion-Imprinted Polymer As a Selective Sorbent for the Removal of Cadmium Ions from Aqueous Solution

Magnetic Luffa@metal-organic frameworks (MOF-199) nanocomposite for the solid phase microextraction of some metal ions at trace levels from food and water samples

Determination of trace labile copper in environmental waters by magnetic nanoparticle solid phase extraction and high-performance chelation ion chromatography

Simple Magnetic Polymeric Ionic Liquid Nanocomposite Coated Hollow Fiber Membrane for the Determination of Lead (II) and Copper (II) in Water and Fruit Juice with Microinjection Sampling-Flame Atomic Absorption Spectrometry (MIS-FAAS)

Enhancing Trace Metal Extraction from Wastewater: Magnetic Activated Carbon as a High-Performance Sorbent for Inductively Coupled Plasma Optical Emission Spectrometry Analysis

On-line Micro-Packed Column Solid-Phase Extraction of Cadmium Using Metal-Organic Framework (MOF) UiO-66 with Posterior Determination by TS-FF-AAS

Boosted capture of trace Cd(II) with a magnetic dual metal-organic-framework adsorbent

A monolithic copolymer prepared from N-(4-vinyl)-benzyl iminodiacetic acid, divinylbenzene and N,N′-methylene bisacrylamide for preconcentration of cadmium(II) and cobalt(II) from biological samples prior to their determination by ICP-MS

A novel post-synthetic modification of magnetic MIL-101(Cr) metal–organic framework with 1,8-diaminonaphthalene chelator and its utilization for separation/determination of cadmium and nickel in food samples

Use of a new magnetic ion–imprinted nanocomposite adsorbent for selective and rapid preconcentration and determination of trace nickel by flame atomic absorption spectrometry