Abstract:Recently, MOF-derived metal oxides have been demonstrated as excellent semiconductor materials. Their derivatives can retain the high porosity and high specific surface area of the parent MOFs, effectively improving the adsorption capacity and mass transfer rate of reactive substances. Herein, UiO-67 was selected as the substrate due to its high hydrothermal stability and high specific surface area. Through the in situ growth of TiO2 nanoparticles, a series of double metal composite catalysts (ZrxTi/C) were produced after calcination at 400 degrees C. The X-ray diffraction (XRD) patterns showed that the UiO-67 crystal structure of collapsed after calcination, forming a Zr-O-C/TiO2 heterojunction. Energy-dispersive spectrometry (EDS) mapping images showed that Ti, Zr, and O were evenly distributed throughout the materials without obvious aggregation. Compared to conventional inorganic semiconductor materials, ZrxTi/C heterojunction catalysts provided much higher BET surface area (317 m(2)g(-1)) for the effective enrichment of contaminants on the catalyst surface. Tetracycline was selected as a representative antibiotic to study photodegradation performance under a 300 W Xenon lamp. Among the obtained catalysts, the Zr0.3Ti/C heterojunction catalyst exhibited the best photocatalytic efficiency, achieving 98% degradation within 30 min in a 10 mg.L-1 tetracycline solution. Fluorescence spectra, electrochemical impedance spectroscopy, and transient photocurrent responses showed that the Zr0.3Ti/C heterojunction catalyst exhibited the fastest charge-hole separation rate and a maximum photocurrent density of 8.75 mu A.cm(-2), which was 2.64 and 3.71 times those of UiO-67 and UiO-67(0.3)/TiO2, respectively. The mechanism of tetracycline photodegradation was determined by UV-visible diffuse-reflectance absorption spectroscopy, Mott-Schottky plots, and electron spin resonance technology. A direct Z-scheme charge separation path was formed by the transfer and recombination of photoexcitede. in the conduction band (CB) of Zr-O-C with h(+) in the valence band (VB) of TiO2, which effectively reduced the combination rate of e. and h(+) in Zr-O-C and TiO2. The photodegradation rate constant of Zr0.3Ti/C was 16 and 3.7 times those of TiO2 and Zr-O-C, respectively, due to its large specific surface area and excellent tetracycline adsorption performance. Furthermore, the Zr-O-C/TiO2 heterostructure exhibiting suitable energy level matching and containing highly conductive carbon material improved the separation and migration of electron-hole pairs. Mechanistic studies revealed that the three types of radicals, superoxide radicals (O-2(center dot-)) ,hydroxyl radicals (center dot OH), and a small amount of holes (h(+)) simultaneously promoted tetracycline photodegradation. After five recycling tests, Zr0.3Ti/C heterojunction catalyst maintained 91.2% removal efficiency for tetracycline, indicating good cycle stability. Combining the synergistic effects of adsorption and photodegradation, using bimetallic heterojunction composites with high specific surface area is promising for the photodegradation of environmental pollutants.

Uncovering Metal-Decorated TiO2 Photocatalysts for Ciprofloxacin Degradation—A Combined Experimental and DFT Study

Degradation of Ciprofloxacin by TiO2/Fe2O3/zeolite Catalyst-Activated Persulfate under Visible LED Light Irradiation

Photocatalytic degradation of ciprofloxacin by using tannin-doped BaTiO 3 catalyst

Photocatalytic degradation of different antibiotics by TiO 2 -carbon composites: a case study of tetracycline and ciprofloxacin

Insight into peroxymonosulfate assisted photocatalysis over Fe2O3 modified TiO2/diatomite composite for highly efficient removal of ciprofloxacin

Mechanisms underlying the photocatalytic degradation pathway of ciprofloxacin with heterogeneous TiO2

Interfacial oxygen vacancy modulated ZIF-8-derived ZnO/CuS for the photocatalytic degradation of antibiotic and organic pollutants: DFT calculation and degradation pathways

Ce3+/Ce4+–TiO2 Nano‐Octahedra as Active Photocatalysts for Ciprofloxacin Photodegradation Under Solar Light

Bi2WO6/C-Dots/TiO2: A Novel Z-Scheme Photocatalyst for the Degradation of Fluoroquinolone Levofloxacin from Aqueous Medium

Synthesis of Selected Mixed Oxide Materials with Tailored Photocatalytic Activity in the Degradation of Tetracycline

Photocatalytic Degradation of Ciprofloxacin with Supramolecular Materials Consisting of Nitrogenous Organic Cations and Metal Salts

Highly Efficient Photocatalytic Degradation of Tetracycline Using a Bimetallic Oxide/Carbon Photocatalyst

Synthesis and Characterisation of Dual Z-Scheme V2O5/g-C3N4 Photocatalysts for Degrading Ciprofloxacin Antibiotics Under Visible Light

Optimizing physico-chemical properties of hierarchical ZnO/TiO 2 nano-film by the novel heating method for photocatalytic degradation of antibiotics and dye

Ce3+/Ce4+–TiO2 Nano‐Octahedra as Active Photocatalysts for Ciprofloxacin Photodegradation Under Solar Light (Adv. Sustainable Syst. 10/2024)

Enhanced Visible-Light-Responsive Photocatalytic Degradation of Ciprofloxacin by the CuxO/Metal-Organic Framework Hybrid Nanocomposite

Carbon dots decorated cadmium sulfide nanomaterials for boosting photocatalytic activity for ciprofloxacin degradation

Photocatalytic decomposition of selected biologically active compounds in environmental waters using TiO2/polyaniline nanocomposites: Kinetics, toxicity and intermediates assessment

Construction of surface plasmonic Bi nanoparticles and α-Bi2O3 co-modified TiO2 nanotube arrays for enhanced photocatalytic degradation of ciprofloxacin: Performance, DFT calculation and mechanism

A multivariate modeling and experimental realization of photocatalytic system of engineered S-C3N4/ZnO hybrid for ciprofloxacin removal: Influencing factors and degradation pathways

Synergistic Effects of Co3O4-gC3N4-Coated ZnO Nanoparticles: A Novel Approach for Enhanced Photocatalytic Degradation of Ciprofloxacin and Hydrogen Evolution via Water Splitting