Abstract:<p>The double-sided electron beam welding (EBW) technique has a prominent advantage that the maximum thickness of the processable plates increases to about twice as much as for single-sided welding. However, there is no in-depth analysis of fatigue properties of the double-sided electron beam welded thick joints with unequal weld penetrations on both sides, especially in the region where two weld seams overlap each other. This research studied low-cycle fatigue properties of the materials in different zones in the thickness direction of a double-sided electron beam welded joint of TC4 titanium alloys with thickness of 140 mm, in which the weld seam on the upper and lower surfaces are about 95 mm and 55 mm in depth respectively. Moreover, S-N curves of the materials in different zones in the thickness direction were obtained. The results showed that low-cycle fatigue properties of the materials in the overlap region (at about 90 mm from the upper surface) of the two weld seams in the double-sided electron beam welded joint were obviously inferior to those in the other zones. By utilizing a high-resolution scanning electron microscope (SEM), the materials in different zones in the thickness direction of the joint were observed. Based on this, it was found that there were more second-phase precipitates in the overlap of the two weld seams compared with the other zones. The microhardness of the overlap region of the two weld seams was found to be higher than those of base metal (BM) and the other zones of the weld seam. Mechanical properties near the overlap region of the two weld seams in the thickness direction of the joint presented most significant heterogeneity, which was one of the important reasons for the weakening of overall mechanical properties of the joint. The research results are of significance for the design and application of a welded structure of titanium alloys with a large thickness in the fields, such as aviation and ships.</p>

Fracture toughness of electron-beam-welded parts of super-thick TC4-DT Ti alloy for aeronautical use

Electron Beam Welding and Post Heat Treatment of a New Near-Beta High-Strength Ti-4Al-5Mo-5V-5Cr-1Nb Alloy

Nonuniformity of Fatigue Properties of Two‐Sided Electron Beam Welded Joint of Superthick Titanium Alloy

Comparison of fatigue performance of TC4 titanium alloy welded by electron beam welding and laser welding with filler wire

Fatigue inhomogeneity of 140 mm thick TC4 titanium alloy double-sided electron beam welded joints

Revealing Tensile Behaviors and Fracture Mechanism of Ti–6Al–4V Titanium Alloy Electron-Beam-welded Joints Using Microstructure Evolution and in Situ Tension Observation

Microstructure and mechanical properties of electron beam welded TC4 titanium alloy structure with backing plate

Initiation and propagation mechanism of fatigue crack in ultra-thick titanium alloy vacuum electron beam welding joint

Microstructure and Properties of the Joints in Thick TC4 Titanium Alloy Plate by the Vacuum Electron Beam

Microstructure and mechanical properties of a new alloy Ti650 welded joint via electron beam welding

Microstructure and Impact Toughness of Laser-Arc Hybrid Welded Joint of Medium-Thick TC4 Titanium Alloy

Microstructural morphology effects on fracture toughness and crack growth behaviors in a high strength titanium alloy

The microstructure and impact toughness of vacuum electron beam welded joints of a highly alloyed dual phase titanium alloy

Micromechanical testing and microstructure analysis of as-welded and post-weld heat-treated Ti-6Al-4V alloy

Microstructure and deformation mechanism of dissimilar titanium alloy Ti600/Ti22Al25Nb weld joints strengthened by isothermal forging

Microstructure Evolution and Mechanical Properties of Wrought/wire Arc Additive Manufactured Ti-6Al-4V Joints by Electron Beam Welding

Study on KIC of TC4-DT titanium alloy electron beam welding

Analysis of heterogeneity of fatigue properties of double-sided electron beam welded 140-mm thick TC4 titanium alloy joints

Microstructure and High-Temperature Tensile Properties of Ti3Al Alloys Laser Welding Joint

Microstructure evolution and strengthening mechanism of electron beam welded TiBw/Ti6Al4V composite joint

Microstructure and mechanical properties of TC4 titanium alloy K-TIG welded joints