Distinct interfacial structures between grains

Jian Luo

DOI: https://doi.org/10.1126/science.ads5954

IF: 56.9

2024-10-25

Science

Abstract:Adsorption transitions at grain boundaries in a polycrystal result in structures that are forbidden in bulk crystals

multidisciplinary sciences

What problem does this paper attempt to address?

Grain-Size Dependent Thermal, Electrical And Mechanical Properties Of Bulk Nanocrystalline Materials

Linli Zhu,Xiaojing Zheng

2010-01-01

Abstract:For the bulk polycrystalline materials, the size of microstructures such as the grain size shrinking to the nanometer scale will result in an apparent change of the physical and mechanical performance of materials, which are distinguished remarkably with the ones of coarse-grain polycrystalline materials. In order to understand the influence of grain size on the properties of polycrystalline materials completely, the theoretical models with the point of view of the microstructures are presented to analyze grain size effects on the phonon thermal conductivity, electrical conductivity and the elastic modulus. For the phonon thermal conductivity, the phonon transport in both the grain interior and grain-boundary are discussed by using the phonon radiative transfer equation, and the analytical expression of conductivity is addressed to describe the influence of grain size on the thermal properties of polycrystalline materials. The electron grain-boundary scattering in the polycrystalline materials is taken into account as the boundary conditions of electron transport in the grain interior, to investigate the grain size effect on electrical conductivity. The predictions of proposed models for the phonon thermal conductivity and the electrical conductivity can agree well with experimental results. For elastic properties of nanocrystalline materials, a framework based on the continuum theory of mechanics is developed by considering the interface energy effects and grain-boundary effects to describe grain-size effects on elastic modulus. Base on the numerical results, it is illustrated that the effects of interface energy and grain-boundary can not be considered for large grain size. When the grain size is under several tens nanometers, the grain-size effects are significant and the effects of interface energy and grain-boundary must be taken into account.
Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

Huijun Guo,Yuhong Zhao,Yuanyang Sun,Jinzhong Tian,Hua Hou,Kewu Qi,Xiaolin Tian

DOI: https://doi.org/10.1016/j.spmi.2019.03.020

IF: 3.22

2019-01-01

Superlattices and Microstructures

Abstract:Using the advantage of phase field crystal model in microstructure evolution, we simulated the details of two-dimensional triangular phase on atomic scale and diffusion time scale. The results show that the annihilation process of grain boundaries can be divided into three stages. The energy changes of the system at different stages are accurately calculated and the process is quantitatively analyzed. By comparing the atomic density distributions at different temperatures and orientation angles, it is shown that the grain boundary is sensitive to temperature. Within the range of low-angle, the increase of orientation angle inhibits the occurrence of annihilation and decreases the grain boundary migration rate. Under the applied stress, the orientation angle has a certain response relationship with the yield strength of the material. This work has some practical significance in the influence of microstructure on the mechanical properties of materials.
Grain incompatibility determines the local structure of amorphous grain boundary complexions

Pulkit Garg,Timothy J. Rupert

2023-09-19

Abstract:Amorphous grain boundary complexions lack long-range crystalline order but are not featureless, as distinct gradients in structural short-range order have been reported through their thickness. In this work, we test the hypothesis that the distribution of short-range order is determined by the confining crystals using atomistic simulations of both Cu-Zr bicrystals and a random polycrystal. Voronoi polyhedra with structures similar to that of perfect face-centered cubic serve as signatures of high structural order and are only found at the amorphous-crystalline transition regions. The density of the ordered structural motifs within a specific amorphous-crystalline transition region is found to not be directly determined by the orientation and symmetry of the grain which touches it, but rather by the incompatibility between the two confining grains. Ordered polyhedra density is found to be inversely related to grain incompatibility, meaning that large incompatibilities between the confining crystals lead to less order in the amorphous-crystalline transition region. The finding that the entire grain-film-grain system must be considered to understand local structure unequivocally demonstrates that amorphous complexions are not simply a collection of independent phases which happen to nucleate at a grain boundary. Rather, an amorphous grain boundary complexion is a single entity that finds a local equilibrium configuration.

Materials Science
Arrangement and Decomposition of Grain Boundary Dislocations: Two-Mode Phase-Field Crystal Simulation

Huanqing Li,Xiaona Wang,Haibin Zhang,Xiaolin Tian,Hua Hou,Yuhong Zhao

DOI: https://doi.org/10.3389/fmats.2022.875519

2022-01-01

Frontiers in Materials

Abstract:The grain-boundary dislocation arrangement and decomposition during constant-volume deformation of a nanoscale bi-crystal system in fcc-structured materials were studied by using the two-mode phase-field crystal (2PFC) method. The effects of different grain boundary misorientations (GBMs) and tensile deformation directions on the dislocation arrangement and decomposition are analyzed. In three different symmetrical tilt grain boundaries evaluated by PFC, the atomic density profile of grain boundaries changed periodically at equilibrium. The initial grain boundary dislocation arrangement of the three samples is almost the same when tensile deformation is applied to the samples in the x- or y- direction, and all are symmetrically arranged in a “bowknot ”structure. The stress at the grain boundary is concentrated with the increase of strain, and dislocation decomposition can effectively reduce the stress concentration. The time steps of dislocation decomposition at grain boundaries decreases with increasing strain rate. This work facilitates the application of PFC in the analysis of grain-boundary mechanics in an extended range of materials.
Diffusive crack-grain interplay in freestanding nanocrystalline silver thin film

Junxia Lu,Qi Zhu,Jin Wang,Hua Wei,Jiangwei Wang,Yuefei Zhang,Ze Zhang

DOI: https://doi.org/10.1016/j.mtla.2021.101116

2021-01-01

Materialia

Abstract:Crack dynamics typically controls the deformation and fracture of nanocrystalline (NC) metallic materials, while the ubiquitous interplay between nanograins and propagating cracks remains unclear. Here, using in situ nanomechanical testing inside transmission electron microscope, we clarify the atomistic interplay between GB evolution and crack propagation in NC silver (Ag) thin films, where the cooperative GB migration, GB re-orientation and nanograin nucleation activated ahead of the crack tip result in conspicuous crack blunt. This grain-crack interplay is critically facilitated by the diffusive plasticity associated with crack propagation, which yields dynamically modified crack tip morphology and rate-limiting intragranular cracking. These atomistic mechanisms of diffusive crack-grain interplay enrich our understanding of the cooperative deformation behaviors in nanograin regime and hold general implications to enhance the fracture resistance of NC metallic materials.
Grain Boundary Structure Dependent Fracture in Nanocrystalline Au Films

Jiabin Liu,Anmin Nie,Cezhou Dong,Peng Wang,Hongtao Wang,Maosen Fu,Wei Yang

DOI: https://doi.org/10.1016/j.matlet.2011.05.095

IF: 3

2011-01-01

Materials Letters

Abstract:Nanocrystalline Au films were in situ strained in a high resolution transmission electron microscope, which demonstrated that the diffusion-assisted intergranular fracture was the dominant failure mode. Grain orientation with respect to grain boundaries (GBs) imposes important effect on the crack propagation and blunting. The low surface energy and high diffusion mobility of {111} planes lead to a notch-like crack. The stress concentration at the tip may help breaking {111} planes layer by layer and thus advance the crack. Cracks can be diverted from the preset path by GBs and grow into the grain interior, which has never been revealed by other experiments and molecular dynamics simulations.
A unified theory of grain growth in polycrystalline materials

Jianfeng Hu,Xianhao Wang,Junzhan Zhang,Zhijian Shen,Jun Luo,Jian Luo

DOI: https://doi.org/10.1016/j.jmat.2021.02.007

2018-12-14

Abstract:Grain growth is a ubiquitous and fundamental phenomenon observed in the cellular structures with the grain assembly separated by a network of grain boundaries, including metals and ceramics. However, the underlying mechanism of grain growth has remained ambiguous for more than 60 years. The models for grain growth, based on the classically linear relationship between the grain boundary migration and capillary driving force, generally predict normal grain growth. Quantitative model for abnormal grain growth is lacking despite decades of efforts. Here, we present a unified model to reveal quantitatively how grain growth evolves, which predicts the normal, abnormal and stagnant behaviors of grain growth in polycrystalline materials. Our model indicates that the relationship between grain boundary migration and capillary driving force is generally nonlinear, but will switch to be the classically linear relationship in a specific case. Furthermore, the grain growth experiments observed in polycrystalline SrTiO3 demonstrates the validity of the unified model. Our study provides a unified, quantitative model to understand and predict grain growth in polycrystalline materials, and thus offers helpful guides for the microstructural design to optimize the properties of polycrystalline materials.

Materials Science
A molecular dynamics study of path-dependent grain boundary properties in nanocrystals prepared using different methods

Hao Suna,Laurent Karim Béland

DOI: https://doi.org/10.48550/arXiv.2104.13736

2021-04-28

Abstract:Grain boundaries are thermodynamically unstable. Hence, their properties should be path-dependent: grain boundaries in nanocrystals prepared using different methods might exhibit different properties. Using molecular dynamics simulations, we investigated grain boundaries of nanocrystals formed by quenching,solidification with pre-induced nucleation sites, and Voronoi tessellation. Some properties were found to be path depend: the quenched model has lower boundary energy per atom, smaller boundary excess free volume per atom, and slower grain growth than the Voronoi model. We surmise that these differences are attributed to the abundant annealing twins in the quenched model. On the other hand, other properties are path independent, such as Young's modulus, Poisson's ratio, and the ratio between grain boundary energy and boundary excess free volume. The results of this study further the understanding of the structural-property relationship of nanocrystals and provide guidance to future simulation-based studies of nanocrystalline materials.

Materials Science
Dislocation interactions mediated by grain boundaries

Paolo Moretti,Lasse Laurson,Mikko J. Alava

DOI: https://doi.org/10.1088/1742-5468/2008/05/P05010

2008-03-08

Abstract:The dynamics of dislocation assemblies in deforming crystals indicate the emergence of collective phenomena, intermittent fluctuations and strain avalanches. In polycrystalline materials, the understanding of plastic deformation mechanisms depends on grasping the role of grain boundaries on dislocation motion. Here the interaction of dislocations and elastic, low angle grain boundaries is studied in the framework of a discrete dislocation representation. We allow grain boundaries to deform under the effect of dislocation stress fields and compare the effect of such a perturbation to the case of rigid grain boudaries. We are able to determine, both analytically and numerically, corrections to dislocation stress fields acting on neighboring grains, as mediated by grain boundary deformation. Finally, we discuss conclusions and consequences for the avalanche statistics, as observed in polycrystalline samples.

Materials Science
Intergrain Scattering in Polycrystals

George Edwin Cragg

DOI: https://doi.org/10.1088/1361-648x/ad7dc6

2024-09-21

Journal of Physics Condensed Matter

Abstract:Transport through grain boundaries in polycrystals is described from first-principles using quantum scattering theory, explicitly including Feshbach resonances to account for intermittently trapped electronic surface states. An effective -matrix is derived, then used to calculate the electrical conductivity which exhibits breakdown, a sharp increase at a critical intergrain bias. Under typical conditions where the electron thermal energy, , is much less than the intergrain barrier height, , the electrical conductivity has the form . In the opposite regime, as may be realized in compressed grains, the approach toward the monocrystal grain conductivity as a function of temperature and bias is also considered.

physics, condensed matter
Effect of grain boundary character on segregation-induced structural transitions

Zhiliang Pan,Timothy J. Rupert

DOI: https://doi.org/10.1103/physrevb.93.134113

IF: 3.7

2016-04-22

Physical Review B

Abstract:Segregation-induced structural transitions in metallic grain boundaries are studied with hybrid atomistic Monte Carlo/molecular dynamics simulations using Cu-Zr as a model system, with a specific emphasis on understanding the effect of grain boundary character. With increasing global composition, the six grain boundary types chosen for this paper first form ordered complexions, with the local segregation pattern depending on the grain boundary core structure, then transform into disordered complexions when the grain boundary composition reaches a critical value that is temperature dependent. The tendency for this transition to a disordered interfacial structure consistently depends on the relative solute excess, instead of the grain boundary energy or misorientation angle. Grain boundaries with high relative solute excess go through gradual disordering transitions, whereas those with low relative solute excess remain ordered until high global Zr concentrations but then abruptly transform into thick disordered films. The results presented here provide a clear picture of the effect of interface character on both dopant segregation patterns and disordered intergranular film formation, showing that all grain boundaries are not equal when discussing complexion transitions.

physics, condensed matter, applied,materials science, multidisciplinary
Characteristics of grain boundary ensembles

Anatoly I. Pshenichnyuk,Alexander P. Zhilyaev

DOI: https://doi.org/10.1016/b978-0-12-819063-0.00007-2

2021-01-01

Abstract:This chapter discusses the methods of geometrical description of the crystallographic structure of individual boundaries and divides the methods into the main classes: low angle, high angle, arbitrary, and special. The algorithm of constructing the basis of the coincident-site lattice is described. Possible special boundaries in the monoclinic lattice are calculated using ZrO2 as an example.
Structure of Grain Boundaries in Nanostructured ZnO

ZH Wu,YX Zhou,XY Zhang,SQ Wei,DL Chen

DOI: https://doi.org/10.1063/1.1759060

IF: 4

2004-01-01

Applied Physics Letters

Abstract:The grain boundary (GB) of nanocrystalline ZnO films is investigated using the x-ray absorption fine structure technique. With the advantage of the dominant GB volume fraction in our samples, the GB structure is found to be neither simply “gas-like” nor “similar to that of coarse-grained phase,” but experiences a transition from the modestly ordered innermost coordination shell around centered atoms to partly disordered second coordination shell and then to completely disordered higher coordination shells.
Effect of the atomic structure of complexions on the active disconnection mode during shear-coupled grain boundary motion

Swetha Pemma,Rebecca Janisch,Gerhard Dehm,Tobias Brink

2024-05-08

Abstract:The migration of grain boundaries leads to grain growth in polycrystals and is one mechanism of grain-boundary-mediated plasticity, especially in nanocrystalline metals. This migration is due to the movement of dislocation-like defects, called disconnections, which couple to externally applied shear stresses. While this has been studied in detail in recent years, the active disconnection mode was typically associated with specific macroscopic grain boundary parameters. We know, however, that varying microscopic degrees of freedom can lead to different atomic structures without changing the macroscopic parameters. These structures can transition into each other and are called complexions. Here, we investigate $[11\overline{1}]$ symmetric tilt boundaries in fcc metals, where two complexions -- dubbed domino and pearl -- were observed before. We compare these two complexions for two different misorientations: In $\Sigma19$b $[11\overline{1}]$ $(178)$ boundaries, both complexions exhibit the same disconnection mode. The critical stress for nucleation and propagation of disconnections is nevertheless different for domino and pearl. At low temperatures, the Peierls-like barrier for disconnection propagation dominates, while at higher temperatures the nucleation is the limiting factor. For $\Sigma$7 $[11\overline{1}]$ $(145)$ boundaries, we observed a larger difference. The domino and pearl complexions migrate in different directions under the same boundary conditions. While both migration directions are possible crystallographically, an analysis of the complexions' structural motifs and the disconnection core structures reveals that the choice of disconnection mode and therefore migration direction is directly due to the atomic structure of the grain boundary.

Materials Science
Machine learning determination of atomic dynamics at grain boundaries

Tristan A. Sharp,Spencer L. Thomas,Ekin D. Cubuk,Samuel S. Schoenholz,David J. Srolovitz,Andrea J. Liu

DOI: https://doi.org/10.1073/pnas.1807176115

2018-09-12

Abstract:In polycrystalline materials, grain boundaries are sites of enhanced atomic motion, but the complexity of the atomic structures within a grain boundary network makes it difficult to link the structure and atomic dynamics. Here we use a machine learning technique to establish a connection between local structure and dynamics of these materials. Following previous work on bulk glassy materials, we define a purely structural quantity, softness, that captures the propensity of an atom to rearrange. This approach correctly identifies crystalline regions, stacking faults, and twin boundaries as having low likelihood of atomic rearrangements, while finding a large variability within high-energy grain boundaries. As has been found in glasses [9,19,26], the probability that atoms of a given softness will rearrange is nearly Arrhenius. This indicates a well-defined energy barrier as well as a well-defined prefactor for the Arrhenius form for atoms of a given softness. The decrease in the prefactor for low-softness atoms indicates that variations in entropy exhibit a dominant influence on the atomic dynamics in grain boundaries.

Materials Science
Ab initio prediction of charged species distribution at grain boundaries: Effects of structure and dopants

Jing Yang,Mostafa Youssef,Bilge Yildiz

DOI: https://doi.org/10.1016/j.actamat.2024.120001

IF: 9.4

2024-05-16

Acta Materialia

Abstract:Understanding charged species transport in polycrystalline material is important in a wide range of applications. Due to defect segregation and space charge layer formation, the transport properties in the vicinity of the grain boundary are often drastically different from their bulk counterpart. In this work, we predict concentration profiles of charged species at Σ3 (100) twin boundary, Σ5 (210) [001] grain boundary, and Σ5 (310) [001] grain boundary of monoclinic ZrO 2 by combining defect energetics from first-principles calculation and continuum level modeling. We show that at the close-packed Σ3 grain boundary, the space charge effect is negligible. The two Σ5 grain boundaries induce a positive space charge potential due to the segregation of oxygen vacancies. In the extended space charge layer, oxygen interstitials and electrons accumulate, leading to enhancement in oxygen diffusivity and n-type electronic conductivity. We survey doped ZrO 2 and show that aliovalent dopants strongly change the magnitude of the space charge potential. In Cr- and Fe-doped ZrO 2 , we observe up to ten orders of magnitude increase in oxygen diffusion coefficient, and five orders of magnitude increase in electronic conductivity. These results show that defect redistribution at grain boundaries is one of the governing factors in determining transport properties in polycrystalline ZrO 2 , and that by such predictive modeling, a detailed understanding of point defect redistribution at extended defects is achievable.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Retrieving Grain Boundaries in 2D Materials

Maolin Yu,Zhili Hu,Jingzhuo Zhou,Yang Lu,Wanlin Guo,Zhuhua Zhang

DOI: https://doi.org/10.1002/smll.202205593

IF: 13.3

Small

Abstract:The coalescence of randomly distributed grains with different crystallographic orientations can result in pervasive grain boundaries (GBs) in 2D materials during their chemical synthesis. GBs not only are the inherent structural imperfection that causes influential impacts on structures and properties of 2D materials, but also have emerged as a platform for exploring unusual physics and functionalities stemming from dramatic changes in local atomic organization and even chemical makeup. Here, recent advances in studying the formation mechanism, atomic structures, and functional properties of GBs in a range of 2D materials are reviewed. By analyzing the growth mechanism and the competition between far-field strain and local chemical energies of dislocation cores, a complete understanding of the rich GB morphologies as well as their dependence on lattice misorientations and chemical compositions is presented. Mechanical, electronic, and chemical properties tied to GBs in different materials are then discussed, towards raising the concept of using GBs as a robust atomic-scale scaffold for realizing tailored functionalities, such as magnetism, luminescence, and catalysis. Finally, the future opportunities in retrieving GBs for making functional devices and the major challenges in the controlled formation of GB structures for designed applications are commented.
Grain Boundary Specific Segregation in Nanocrystalline Fe(Cr)

Xuyang Zhou,Xiao-Xiang Yu,Tyler Kaub,Richard L Martens,Gregory B Thompson

DOI: https://doi.org/10.1038/srep34642

2016-10-06

Abstract:A cross-correlative precession electron diffraction - atom probe tomography investigation of Cr segregation in a Fe(Cr) nanocrystalline alloy was undertaken. Solute segregation was found to be dependent on grain boundary type. The results of which were compared to a hybrid Molecular Dynamics and Monte Carlo simulation that predicted the segregation for special character, low angle, and high angle grain boundaries, as well as the angle of inclination of the grain boundary. It was found that the highest segregation concentration was for the high angle grain boundaries and is explained in terms of clustering driven by the onset of phase separation. For special character boundaries, the highest Gibbsain interfacial excess was predicted at the incoherent ∑3 followed by ∑9 and ∑11 boundaries with negligible segregation to the twin and ∑5 boundaries. In addition, the low angle grain boundaries predicted negligible segregation. All of these trends matched well with the experiment. This solute-boundary segregation dependency for the special character grain boundaries is explained in terms of excess volume and the energetic distribution of the solute in the boundary.
Revealing Grain Boundaries and Defect Formation in Nanocrystal Superlattices by Nanodiffraction

Nastasia Mukharamova,Dmitry Lapkin,Ivan A. Zaluzhnyy,Alexander André,Sergey Lazarev,Young Y. Kim,Michael Sprung,Ruslan P. Kurta,Frank Schreiber,Ivan A. Vartanyants,Marcus Scheele

DOI: https://doi.org/10.48550/arXiv.1904.02408

2019-04-04

Abstract:X-ray nanodiffraction is applied to study the formation and correlation of domain boundaries in mesocrystalline superlattices of PbS nanocrystals with face-centered cubic structure. Each domain of the superlattice can be described with one of two mesocrystalline polymorphs with different orientational order. Close to a grain boundary, the lattice constant decreases and the superlattice undergoes an out-of-plane rotation, while the orientation of the nanocrystals with respect to the superlattice remains unchanged. These findings are explained with the release of stress on the expense of specific nanocrystal-substrate interactions. The fact that correlations between adjacent nanocrystals are found to survive the structural changes at most grain boundaries implies that the key to nanocrystal superlattices with macroscopic domain sizes are strengthened interactions with the substrate.

Materials Science

Distinct interfacial structures between grains

Grain-Size Dependent Thermal, Electrical And Mechanical Properties Of Bulk Nanocrystalline Materials

Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

Grain incompatibility determines the local structure of amorphous grain boundary complexions

Arrangement and Decomposition of Grain Boundary Dislocations: Two-Mode Phase-Field Crystal Simulation

Diffusive crack-grain interplay in freestanding nanocrystalline silver thin film

Grain Boundary Structure Dependent Fracture in Nanocrystalline Au Films

A unified theory of grain growth in polycrystalline materials

A molecular dynamics study of path-dependent grain boundary properties in nanocrystals prepared using different methods

Dislocation interactions mediated by grain boundaries

Intergrain Scattering in Polycrystals

Effect of grain boundary character on segregation-induced structural transitions

Characteristics of grain boundary ensembles

Structure of Grain Boundaries in Nanostructured ZnO

Effect of the atomic structure of complexions on the active disconnection mode during shear-coupled grain boundary motion

Machine learning determination of atomic dynamics at grain boundaries

Ab initio prediction of charged species distribution at grain boundaries: Effects of structure and dopants

Retrieving Grain Boundaries in 2D Materials

Grain Boundary Specific Segregation in Nanocrystalline Fe(Cr)

Revealing Grain Boundaries and Defect Formation in Nanocrystal Superlattices by Nanodiffraction