Abstract:To address such challenges as an uncertain number of demagnetization poles of the permanent magnet synchronous motor (PMSM) and cases in which the fault cannot be located, this paper proposes a fault identification and location methodology based on the analysis of the motor stator current. First, the influence of the irreversible demagnetization of permanent magnets on the analytical model of the back electromotive force (Back-EMF) of the rotor in a single motor stator slot is analyzed. Moreover, considering the topology of the motor, the influence of the demagnetization fault on the stator phase current and branch current is analyzed. Since the stator phase currents cannot diagnose the partial demagnetization faults of PMSM with some topological structures, the stator branch current is selected as the signal for the identification and localization of the demagnetization fault. Secondly, the demagnetization fault diagnosis and mode recognition of the motor are carried out through the amplitude of the real-time branch current and the harmonic components of the PMSM. A sample database of demagnetization faults is established through calculation and normalization of the residual value of the stator branch current and the branch current of the healthy motor after demagnetization in one pole order. The fault threshold is obtained by analyzing the residual of the branch current of uniform demagnetization and the Pearson correlation coefficient of the fault sample database. Then, the correlation coefficient between the real-time branch current residual value of PMSM and the fault sample database is analyzed, and the number of demagnetization poles and the fault location are determined by the number and location of the calculated correlation coefficient exceeding the threshold. Finally, the feasibility and effectiveness of the proposed method are verified by the finite element analysis (FEA) results.

Finites elements and signal processing analysis of eccentricity and demagnetization faults in PMSM drivetrains: Approach for diagnosis

Efficiency Optimization of PMSM Drives Using Field-Circuit Coupled FEM for EV/HEV Applications

Detecting Eccentricity Fault in Permanent Magnet Synchronous Machines by Means of Zero-Sequence Voltage Component

Detection and Classification of Eccentricity and High-Resistance Connection Faults in PMSMs Using Zero-Sequence Voltage Component

Research on fault analysis and diagnosis of PMSM in HEV

Application of Machine Learning for Analysis of Static Eccentricity Fault in IPMSM using Finite Element Method

Fault Tolerant Control of PMSM Drive Based on Voltage Sensor for Electric Vehicle Application

Research on Electromagnetic and Vibration Characteristics of Dynamic Eccentric PMSM Based on Signal Demodulation

Demagnetization Fault Diagnosis for Magnetically Suspended PMSM Using Rotor Displacement Signals

Research and Application of Intelligent Diagnosis Technology in Permanent Magnet Generator for Stress Demagnetization Fault

RLS-Based Algorithm for Detecting Partial Demagnetization under Both Stationary and Nonstationary Conditions

Bearing Fault Diagnosis under Time-Varying Speed and Load Conditions Via Speed Sensorless Algorithm and Angular Resample

Faults And Diagnosis Methods Of Permanent Magnet Synchronous Motors: A Review

Partial Demagnetization Fault Analysis and Diagnosis for Fractional Slot Concentrated Winding PMSMs Based on DQ-axis Components

Diagnosis of Air‐gap Eccentricity and Partial Demagnetisation of an Interior Permanent Magnet Synchronous Motor Based on Inverse Transient Complex Inductance Vector Theory

Diagnosing and distinguishing rotor eccentricity from partial demagnetisation of interior PMSM based on fluctuation of high-frequency d-axis inductance and rotor flux

Online Detection of Rotor Eccentricity and Demagnetization Faults in PMSMs Based on Hall-Effect Field Sensor Measurements

Investigation of a five-phase 20-slot/18-pole PMSM for electric vehicles

Demagnetization Fault Detection and Location in PMSM Based on Correlation Coefficient of Branch Current Signals

Analytical calculation and finite element evaluation of electromagnetic leakage field distribution in surface-mounted permanent magnet synchronous motors taking the rotor eccentricity effect into account

Fault Diagnosis for Permanent Magnet Synchronous Motor With Demagnetization Fault and Sensor Fault