Abstract:We propose and numerically characterize the optical characteristics of a novel photonic crystal fiber (PCF) based surface plasmon resonance (SPR) sensor in the visible to near infrared (500-2000 nm) region for refractive index (RI) sensing. The finite element method (FEM) is used to design and study the influence of different geometric parameters on the sensing performance of the sensor. The chemically stable plasmonic material gold (Au) is used to produce excitation between the core and plasmonic mode. On a pure silica (SiO2) substrate, a rectangular structured core is used to facilitate the coupling strength between the core and the surface plasmon polariton (SPP) mode and thus improves the sensing performance. By tuning the geometric parameters, simulation results show a maximum wavelength sensitivity of 58000 nm/RIU (Refractive Index Unit) for the x polarization and 62000 nm/RIU for the y polarization for analyte refractive indices ranging from 1.33 to 1.43. Moreover, we characterize the amplitude sensitivity of the sensor that shows a maximum sensitivity of 1415 RIU-1 and 1293 RIU-1 for the x and y polarizations, respectively. To our knowledge, this is the highest sensitivity for an SPR in published literature, and facilitates future development of sensors for accurate and precise analyte measurement. The sensor also attains a maximum figure of merit (FOM) of 1140 and fine RI resolution of 1.6 × 10-6. Owing to strong coupling strength, high sensitivity, high FOM and improved sensing resolution, the proposed sensor is suited for real-time, inexpensive and accurate detection of biomedical and biological analytes, biomolecules, and organic chemicals.

Double Polarization Peak Shift Sensitivity (DPPSS): An interrogation technique for a PCF SPR sensor

Dual Peak Double Resonance Sensing Using a Dual Plasmonic Material PCF-SPR Sensor

Polarization interference interrogation of angular surface plasmon resonance sensors with wide metal film thickness tolerance

A Two-Dimensional Polarization Interferometry Based Parallel Scan Angular Surface Plasmon Resonance Biosensor

A unique wheel-shaped exposed core LSPR-PCF sensor for dual-peak sensing: Applications in the optical communication bands, M-IR region and biosensing

D-Shaped PCF with Quasi-Sinusoidal Surface Topography for Dual-Polarization and Enhanced Performance Surface Plasmon Resonance Sensor

Sensitivity enhancement of surface plasmon resonance imaging sensor with structural parameter optimization based on polarization contrast modulation

Intensity-Modulated Surface Plasmon Resonance Array Sensor Based on Polarization Control

Dual-polarized highly sensitive plasmonic sensor in the visible to near-IR spectrum

Surface Plasmon Resonance Sensor Based on Side-Polished D-Shaped Photonic Crystal Fiber with Split Cladding Air Holes

Design and analysis of surface plasmon resonance D-shape optical fiber sensor using plasmonic material of different structures

Highly sensitive dual-side polished SPR PCF sensor for ultra-wide analyte range in the visible to near-IR operating band

Modified D-type surface plasmon resonance (SPR)-based photonic crystal fiber (PCF) for application as a polarization filter and refractive index sensor

Polarization Selective PCF-Based Plasmonic Biosensor for Multi-Analyte Detection

Contrast-Enhancing Polarization Control Method for Surface Plasmon Imaging Sensor

Design and Performance Analysis of a Novel Hoop-Cut SPR-PCF Sensor for High Sensitivity and Broad Range Sensing Applications

Double-sided Polished Ultra-stable and Ultra-sensitive Optical Fiber Sensor

Dual-Side Polished Surface Plasmon Resonance–Based Photonic Crystal Fiber for Refractive Index Sensing and Polarization Filtering

Double-layered side-polished ultra-highly sensitive photonic crystal fiber-based surface plasmonic refractive index sensor

Numerical Analysis of Highly Sensitive Twin-Core, Gold-Coated, D-Shaped Photonic Crystal Fiber Based on Surface Plasmon Resonance Sensor