Single-particle fibrinogen detection using platelet membrane-coated fluorescent polystyrene nanoparticles

Da Chen,Ziyi Song,Meiling Lian,Yi Yang,Shen Lin,Lehui Xiao

DOI: https://doi.org/10.1039/d0nr08492a

IF: 6.7

2021-01-01

Nanoscale

Abstract:Fibrinogen participates in many physiological processes and is a biomarker for a variety of diseases.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry

What problem does this paper attempt to address?

Monitoring the Formation of Fibrin Clots as Part of the Coagulation Cascade Using Fluorescent Single-Walled Carbon Nanotubes

Efrat Gerstman,Adi Hendler-Neumark,Verena Wulf,Gili Bisker

DOI: https://doi.org/10.1021/acsami.3c00828

IF: 9.5

2023-05-03

ACS Applied Materials & Interfaces

Abstract:Blood coagulation is a critical defense mechanism against bleeding that results in the conversion of liquid blood into a solid clot through a complicated cascade, which involves multiple clotting factors. One of the final steps in the coagulation pathway is the conversion of fibrinogen to insoluble fibrin mediated by thrombin. Because coagulation disorders can be life-threatening, the development of novel methods for monitoring the coagulation cascade dynamics is of high importance. Here, we use...

materials science, multidisciplinary,nanoscience & nanotechnology
An optical nanofibre-enabled on-chip single-nanoparticle sensor

Ning Liu,Ni Yao,Shipeng Wang,Zhang Zhang,Tanchen Ren,Ying Gao,Xuhao Zhou,Limin Tong,Lei Zhang

DOI: https://doi.org/10.1039/d3lc00499f

IF: 7.517

2023-01-01

Lab on a Chip

Abstract:Single-nanoparticle detection has received tremendous interest due to its significance in fundamental physics and biological applications. Here, we demonstrate an optical nanofibre-enabled microfluidic sensor for the detection and sizing of nanoparticles. Benefitting from the strong evanescent field outside the nanofibre, a nanoparticle close to the nanofibre can scatter a portion of the field energy to the environment, resulting in a decrease in the transmitted intensity of the nanofibre. On the other hand, the narrow and shallow microfluidic channel provides a femtoliter-scale detection region, making nanoparticles flow through the detection region one by one. By real-time monitoring of the transmitted intensity of the nanofibre, the detection of a single polystyrene (PS) nanoparticle as small as 100 nm in diameter and exosomes in solution is realised. Based on a statistical analysis, the mean scattering signal is related to the size of the nanoparticle. Experimentally, a mixture of nanoparticles of different diameters (200, 500, and 1000 nm) in solution is identified. To demonstrate its potential in biological applications, high-throughput counting of yeasts using a pair of microchannels and dual-wavelength detection of fluorescently labelled nanoparticles are realised. We believe that the developed nanoparticle sensor holds great potential for the multiplexed and rapid sensing of diverse viruses. An nanofibre-enabled microfluidic sensor for detection nanoparticles which hold great potentials for sensing of diverse viruses.
Coagulation-Inspired Direct Fibrinogen Assay Using Plasmonic Nanoparticles Functionalized with Red Blood Cell Membranes.

Gyudo Lee,D. Yoon,Dongtak Lee,Insu Kim,S. W. Lee,J. Lee

DOI: https://doi.org/10.1021/acsnano.0c08136

IF: 17.1

2021-01-29

ACS Nano

Abstract:The fast measurement of fibrinogen is essential in evaluating life-threatening sepsis and cardiovascular diseases. Here, we aim to utilize biomimetic plasmonic Au nanoparticles using red blood cell membranes (RBCM-AuNPs) and demonstrate nanoscale coagulation-inspired fibrinogen detection via cross-linking between RBCM-AuNPs. The proposed biomimetic RBCM-AuNPs are highly suitable for fibrinogen detection because hemagglutination, occurring in the presence of fibrinogen, induces a shift in the localized surface plasmon resonance of the NPs. Specifically, when the two ends of the fibrinogen protein are bound to receptors on separate RBCM-AuNPs, cross-linking of the RBCM-AuNPs occurs, yielding a corresponding plasmon shift within 10 min. This coagulation-inspired fibrinogen detection method, with a low sample volume, high selectivity, and high speed, could facilitate the diagnosis of sepsis and cardiovascular diseases.

Chemistry,Medicine,Engineering,Materials Science
Interaction of fibrinogen-magnetic nanoparticle bioconjugates with integrin reconstituted into artificial membranes

Ulrike Martens,Una Janke,Sophie Moeller,Delphine Talbot,Ali Abou-Hassan,Mihaela Delcea

DOI: https://doi.org/10.48550/arXiv.2012.10519

2020-12-18

Biological Physics

Abstract:Magnetic nanoparticles have a broad spectrum of biomedical applications including cell separation, diagnostics and therapy. One key issue is little explored: how do the engineered nanoparticles interact with blood components after injection? The formation of bioconjugates in the bloodstream and subsequent reactions are potentially toxic due to the ability to induce an immune response. The understanding of the underlying processes is of major relevance to design not only efficient, but also safe nanoparticles for targeted drug delivery applications. In this study, we report on maghemite nanoparticles functionalized with citrate, dextran and polyethylene glycol coatings and their interaction with the clotting protein fibrinogen. Further, we investigate using biophysical tools (e.g. dynamic light scattering, circular dichroism spectroscopy and quartz crystal microbalance) the interaction of the magnetic nanoparticles-fibrinogen bioconjugates with artificial cell membranes as a model system for blood platelets. We found that fibrinogen corona formation provides colloidal stability to maghemite nanoparticles. In addition, bioconjugates of fibrinogen with dextran and citrate coated NPs interact with integrin containing lipid bilayer, especially upon treatment with divalent ions, whereas PEG-coating reveals minor interaction. Our study at the interface of protein-conjugated nanoparticles and artificial cell membranes is essential for engineering safe nanoparticles for drug delivery applications.
Programming an Antibody-Peptide Sandwich Procedure for Selectivity and Ultrasensitive Detection of Fibrin Using Double-Stranded DNA (Dsdna) Hemp String Probe

Jinrong Zhang,Yuanfu Zhang,Yawei Chen,Xue Zhao,Youzhen Hao,Qingwang Xue,Shuhao Wang

DOI: https://doi.org/10.2139/ssrn.4293021

2022-01-01

SSRN Electronic Journal

Abstract:A novel, highly sensitive and selective sandwich-like enzyme-linked immunoassay procedure for the detection of fibrin was developed. Firstly the monoclonal anti-fibrinogen which was coated on the surface of microtiter plate can interact with fibrin, and the probe of double-stranded DNA (dsDNA) hemp string containing the homing peptide can secondarily recognize the fibrin. On the other hand, combined with the hybridization chain reaction (HCR), the terminal of dsDNA can be folded to a long G-quadruplex-hemin DNAzyme, which can catalyze luminol–H2O2 system to generate strong chemiluminescence signal. Under the optimal experimental conditions, the assay showed a linear toward fibrin concentration in the range of 0.14 pM to 72.5 pM with detection limit of 0.04 pM. Because of high selectivity and ultra-sensitivity, the designed procedure provides great potential for applications in medical diagnosis.
A dual amplified gold nanoparticle‐based biosensor for ultrasensitive and selective detection of fibrin

Wenyue Gong,Yuanfu Zhang,Yawei Chen,Xue Zhao,Shuhao Wang

DOI: https://doi.org/10.1002/bio.4764

IF: 2.613

2024-05-01

Luminescence

Abstract:A dual amplified biosensor was designed for ultrasensitive and selective detection of fibrin based on the sensing of antibody‐fibrin‐homing peptide using DNAzyme–AuNPs–CREKA ribbon probe. With excellent dual‐amplification strategy including load of gold nanoparticles (AuNPs) and rolling circle amplification technology, the method exhibited impressive sensitivity. Ultrasensitive, selective, and non‐invasive detection of fibrin in human serum is critical for disease diagnosis. So far, the development of high‐performance and ultrasensitive biosensors maintains core challenges for biosensing. Herein, we designed a novel ribbon nanoprobe for ultrasensitive detection of fibrin. The probe contains gold nanoparticles (AuNPs) that can not only link with homing peptide Cys‐Arg‐Glu‐Lys‐Ala (CREKA) to recognize fibrin but also carry long DNA belts to form G‐quadruplex‐based DNAzyme, catalyzing the chemiluminescence of luminol–hydrogen peroxide (H2O2) reaction. Combined with the second amplification procedure of rolling circle amplification (RCA), the assay exhibits excellent sensitivity with a detection limit of 0.04 fmol L−1 fibrin based on the 3‐sigma. Furthermore, the biosensor shows high specificity on fibrin in samples because the structure of antibody‐fibrin‐homing peptide was employed to double recognize fibrin. Altogether, the simple and inexpensive approach may present a great potential for reliable detection of biomarkers.

chemistry, analytical
A Highly Sensitive Fluorescence Turn-on Platform with Silver Nanoparticles Aptasening for Human Platelet-Derived Growth Factor-Bb

Xi Wang,Wei Li,Zhonghui Li,Hui Li,Danke Xu

DOI: https://doi.org/10.1016/j.talanta.2015.07.019

IF: 6.1

2015-01-01

Talanta

Abstract:In this paper, we demonstrated a simple and highly sensitive fluorescence platform for protein detection. Silver nanoparticles (AgNPs) worked as carriers and quenchers for FAM labeled aptamers (FAM-apt). Biotin labeled aptamers (Bio-apt), FAM-apt functionalized AgNPs (Ag-FAM-apt), and a target protein, human platelet-derived growth factor-BB (PDGF-BB) could form a sandwich-type complex. Once the etching solvents were added, AgNPs were dissolved and the fluorescence resonance energy transfer (FRET) between AgNPs and FAM was broken. FAM-apt were no longer quenched and released into the solution in the 96-well microplates, so the fluorescence signal would turn from “off” state to “on” state. This method had possessed several advantages: Firstly, increased specificity which was contributed by the sandwich binding of aptamers; Secondly, quenching ability of AgNPs which was utilized to make signal turn-on; Thirdly, high throughout in which 96 samples could be detected simultaneously. The results showed a linear relationship between fluorescence intensity and PDGF-BB concentration (10ngmL−1–100ngmL−1), and the detection limit was 7ngmL−1. This simple and sensitive method would have a promising future for development and application.
ADSORPTION OF FIBRINOGEN ON THE SURFACES OF BIOMATERIALS STUDIED BY USING SURFACE PLASMON RESONANCE (SPR) SENSOR

Caide Xiao,Senfang Sui,Yandao Gong,Xiufang Zhang,Nanming Zhao

DOI: https://doi.org/10.3969/j.issn.0258-8021.2000.01.009

2000-01-01

Abstract:In this work, dynamic characteristics of fibrinogen adsorption onto the surfaces of gold, monolayer of distearoyl phosphatidylcholine (DSPC), polyurethane (PU) made by Chengdu University of Science and Technology (CUST Type II PU), PU made by DOW Chemistry, USA (Pellethane 2363-55D) and plexiglass were measured by using a self-made surface plasmon resonance (SPR) sensor. Different behavior of fibrinogen adsorption onto different surfaces were observed at the same fibrinogen concentration of 5 mg/ml. The phospholipid monolayer showed the lowest speed and the smallest equilibrium surface concentration of adsorbed fibrinogen (C(s) = 1 ng/mm2), followed by the gold film (C(s) = 3.5 ng/mm2), CUST Type II PU(C(s) = 3.8 ng/mm2) and pellethane 2363-55D (C(s) = 4.3 ng/mm2). The plexiglass has shown the highest speed and the largest equilibrium surface concentration of adsorbed fibrinogen (C(s) = 4.5 ng/mm2). It showed that the dynamic characteristic of fibrinogen adsorption onto material surface was closely related to the hemocompatibility. SPR technique combined with the methods of material spreading onto the surface of gold developed in this work, including the polymer spreading by centrifugation and lipid spreading by LB technique, provided us a very sensitive tool for the real-time, dynamic and in-situ study of protein adsorption on the surface of biomaterials. It will be promising to use these techniques in the measurement and evaluation of biocompatibility of materials.
A Fibrin Site‐Specific Nanoprobe for Imaging Fibrin‐Rich Thrombi and Preventing Thrombus Formation in Venous Vessels

Yixin Zhong,Man Ye,Liandi Huang,Liu Hu,Fangzhou Li,Qiankun Ni,Jie Zhong,Hongyun Wu,Fengfei Xu,Jie Xu,Xiaojing He,Zhigang Wang,Haitao Ran,Yunzhu Wu,Dajing Guo,Xing‐Jie Liang

DOI: https://doi.org/10.1002/adma.202109955

IF: 29.4

2022-03-14

Advanced Materials

Abstract:Venous thromboembolism (VTE) is a prevalent public health issue worldwide. Before treatment, spatiotemporally accurate thrombus detection is essential. However, with the currently available imaging technologies, this is challenging. Herein, the development of a novel fibrin-specific nanoprobe (NP) based on the conjugation of poly(lactic-co-glycolic acid) with the pentapeptide Cys-Arg-Glu-Lys-Ala (CREKA) for selective and semiquantitative imaging in vivo is presented. By integrating Fe<sub>3</sub> O<sub>4</sub> and NIR fluorochrome (IR780), the NP can function as a highly sensitive sensor for the direct analysis of thrombi in vivo. The fibrin-specific NP distinguishes fibrin-rich thrombi from collagen-rich or erythrocyte-rich thrombi, which can be beneficial for future individually tailored therapeutic strategy. Furthermore, loading NPs with the ketotifen fumarate results in mast cell degranulation inhibition, and hence, NPs can prevent thrombosis without the risk of excessive bleeding. Thus, the use of fibrin-specific NPs may serve as a safe alternative approach for the detection and prevention of VTEs in susceptible populations in the future.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
A two-step electrochemical biosensor based on Tetrazyme for the detection of fibrin

Jiayi Jiang,Bin Wang,Linghuan Luo,Na Ying,Gaofan Shi,Mengmeng Zhang,Haoyuan Su,Dongdong Zeng

DOI: https://doi.org/10.1002/bab.2531

Abstract:In this study, an electrochemical biosensor was constructed for the detection of fibrin, specifically by a simple two-step approach, with a novel artificial enzyme (Tetrazyme) based on the DNA tetrahedral framework as signal probe. The multichannel screen-printed electrode with the activated surface cannot only remove some biological impurities, but also serve as a carrier to immobilize a large number of antigen proteins. The DNA tetrahedral nanostructure was employed to ensure the high sensitivity of the probe for biological analysis. The hemin was chimeric into the G-quadruplex to constitute the complex with peroxidase catalytic activity (hemin/G4-DNAzyme), subsequently, Tetrazyme was formed through combining of this complex and DNA tetrahedral nucleic acid framework. The artificial enzyme signal probe formed by the covalent combination of the homing peptide (Cys-Arg-Glu-Lys-Ala, CREKA), which is the aptamer of fibrin and the new artificial enzyme is fixed on the surface of the multichannel carbon electrode by CREKA-specific recognition, so as to realize the sensitive detection of fibrin. The feasibility of sensing platform was validated by cyclic voltammetry (CV) and amperometric i-t curve (IT) methods. Effects of Tetrazyme concentration, CREKA concentrations and hybridization time on the sensor were explored. Under the best optimal conditions of 0.6 μmol/L Tetrazyme, 80 μmol/L CREKA, and 2.5 h reaction time, the immunosensor had two linear detection ranges, 10-40 nmol/L, with linear regression equation Y = 0.01487X - 0.011 (R2 = 0.992), and 50-100 nmol/L, with linear regression equation Y = 0.00137X + 0.6405 (R2 = 0.998), the detection limit was 9.4 nmol/L, S/N ≥ 3. The biosensor could provide a new method with great potential for the detection of fibrin with good selectivity, stability, and reproducibility.
Human Fibrinogen Adsorption Onto Single-Walled Carbon Nanotube Films

Li Song,Jie Meng,Jun Zhong,Lifeng Liu,Xinyuan Dou,Dongfang Liu,Xiaowei Zhao,Sudong Luo,Zengxing Zhang,Yanjuan Xiang,Haiyan Xu,Weiya Zhou,Ziyu Wu,Sishen Xie

DOI: https://doi.org/10.1016/j.colsurfb.2005.12.003

2006-01-01

Abstract:The adsorption behavior of human fibrinogen (Hfg) on single-walled carbon nanotube (SWNT) films was investigated using scanning electron microscopy (SEM) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. It was shown in the SEM images that fibrinogen was adsorbed strongly on the surface of SWNT when the samples were incubated in the Hfg solutions for 10 min. The dependence of adsorption on the concentration of fibrinogen was also investigated and it was found that adsorption increased with increasing concentration. In order to further explore the adsorption of fibrinogen on SWNT surface, NEXAFS spectra were obtained at the N K-edge and the C K-edge. The results confirmed the conclusion regarding the dependence of adsorption on fibrinogen concentration. It is demonstrated that, due to its high sensitivity to the surface elements, NEXAFS spectroscopy is a powerful tool to investigate the adsorption of fibrinogen on SWNT films.
Protein Adsorption and PEG Modification on the Surface of Single-walled Carbon Nanotubes Non-woven Film

Xiao-Tian GUO,Jie MENG,Hua KONG,Li SONG,Chao-Ying WANG,Zhao-Hui HE,Hai-Yan XU,Si-Shen XIE

DOI: https://doi.org/10.3969/j.issn.0258-8021.2005.06.027

2005-01-01

Abstract:In recent years,carbon nanotubes have attracted intensive interests of potential applications in biomedical area because of their unique nanostructures and outstanding mechanical,electrical properties.Fibrinogen is one kind of important human plasma proteins related to blood coagulation. This work is focused on the adsorption of fibrinogen to the SWNT nonwoven film fhrough nonspecific binding.The adsorption behavior of fibrinogen was analyzed using scanning electron microscope(SEM) and enzyme linked immunosorbent assay(ELISA) respectively.Experimental results indicated that SWNT nonwoven film exhibited intense adsorption preference to fibrinogen molecules.Data obtained from ELISA demonstrated that the immunogenicity of adsorbed fibrinogen molecules was well maintained.Analytical results from XPS indicated that PEG modification of SWNT nonwoven film was achieved and the non-specific adsorption of fibrinogen on SWNT nonwoven film was partly inhibited by the PEG modification.
Interfacial Interaction Between Human Fibrinogen And Polytetrafluoroethylene

Hanyi Zhang,Xiufang Zhang,Yandao Gong,Nanming Zhao,张汉燚,张秀芳,公衍道,赵南明

1996-01-01

Chinese Science Bulletin

Abstract:null
CuO NWs boosted triboelectric microfluidic nanosensor functionalized by collagen-protein interactions for real-time platelet count monitoring

Jia-Cheng Lin,Kuldeep Kaswan,Subhodeep Chatterjee,Yu-Wen Wu,Manish Kumar Sharma,Ashok Ranjan,Snigdha Roy Barman,Yu-Zih Lin,Thierry Burnouf,Wilfrid Boireau,Ming-Yen Lu,Yong-Kwang Tu,I-Chang Su,Ping-Hsiu Wu,Zong-Hong Lin,Yu-Jui Fan

DOI: https://doi.org/10.1016/j.cej.2024.151586

IF: 15.1

2024-04-29

Chemical Engineering Journal

Abstract:Blood platelet count significantly affects the development of severe conditions like myocardial infarction, peripheral arterial ischemia, respiratory compromise, stroke, diabetes, coronavirus disease 2019 (COVID-19), along with chemotherapy patients and those suffering cardiovascular diseases (CVDs). These conditions necessitate frequent monitoring of platelet counts to guide diagnostic and therapeutic decisions. However, existing techniques are relatively time-consuming, lack of accuracy and require precise operation. The emergence of these severe diseases underscored the need to develop advanced platelet count-monitoring techniques which are rapid, highly precise, and conveniently portable for point-of-care applications. In this study, we emphasized the development of a triboelectric microfluidic nanosensor (TMNS) for platelet quantification through the assessment of flow resistance. The functionality of TMNS device is based on immobilization of platelets on a collagen layer coated inside a microfluidic channel. The triboelectric voltage output is measured as a detection signal of the flow resistance and is enhanced by incorporating high surface area copper oxide nanowires (CuO NWs) on the interior of copper tubes. These copper tubes serve as terminal electrodes and for flow guiding. The flow resistance of plasma solutions is elevated when the platelet concentration increases due to heightened adherence of platelets onto the collagen layer. Variations in flow resistance induce alterations in contact electrification, causing changes in output voltage at load terminals. Fine-tuning of the TMNS device was achieved by optimizing the channel width and length, flowing liquid viscosity, and voltage measurement technique. Platelet quantification sensing data were acquired through the combination of platelet-rich plasma (PRP) and platelet-poor plasma (PPP) solutions. The described device exhibits promising capabilities for platelet-count monitoring in whole-blood samples collected from three distinct patient groups, showcasing its potential impact in precise point-of-care applications.

engineering, chemical, environmental
Rapid and sensitive detection of heart-type fatty acid binding protein using aggregation-induced emission nanoparticles on digital microfluidics workstation

Zhenhua Chen,Yang Xie,Yue Cao,Yu Wang,Meng Zhao,Yingsong Wu,Banglao Xu,Guanfeng Lin

DOI: https://doi.org/10.1016/j.bios.2024.116563

2024-10-15

Abstract:Early and rapid diagnostic of acute myocardial infarction (AMI) during its developing stage is crucial due to its high fatality rate. Heart-type fatty acid binding protein (h-FABP) is an ideal biomarker for the quantitative diagnosis of AMI, surpassing traditional markers such as myoglobin, creatine phosphokinase-MB, and troponin in terms of sensitivity, specificity, and prognostic value. To obtain diagnostic and prognostic information, a precise and fully quantitative measurement of h-FABP is essential, typically achieved through an immunosorbent assay like the enzyme-linked immunosorbent assay. Nevertheless, this method has several limitations, including extended detection time, complex assay procedures, the necessity for skilled technicians, and challenges in implementing automated detection. This research introduces a novel biosensor, utilizing aggregation-induced emission nanoparticles (AIENPs) and integrated with a digital microfluidic (DMF) workstation, designed for the sensitive, rapid, and automated detection of h-FABP in low-volume serum samples. AIENPs and magnetic beads in nanoscale were served as the capture particles and the fluorescent probe, which were linked covalently to anti-h-FABP antibodies respectively. The approach was based on a sandwich immunoassay and performed on a fully automated DMF workstation with assay time by 15 min. We demonstrated the determination of h-FABP in serum samples with detection limit of 0.14 ng/mL using this biosensor under optimal condition. Furthermore, excellent correlations (R2 = 0.9536, n = 50) were obtained between utilizing this biosensor and commercialized ELISA kits in clinical serum detecting. These results demonstrate that our flexible and reliable biosensor is suitable for direct integration into clinical diagnostics, and it is expected to be promising diagnostic tool for early detection and screening tests as well as prognosis evaluation for AMI patients.
Exploring Single Molecule Interactions: Heparin and FGF-1 Proteins Through Solid-State Nanopores

Navod Thyashan Sudirikku Jayaweera,Madhav Ghimire,Sangyoup Lee,Min Jun Kim

DOI: https://doi.org/10.1039/d4nr00274a

IF: 6.7

2024-03-20

Nanoscale

Abstract:Detection and characterization of the protein-protein interactions are essential for many cellular processes, such as cell growth, tissue repair, drug delivery, and other physiological functions. In our research, we have utilized the emerging solid-state nanopore sensing technology, which is highly sensitive to better understand heparin and fibroblast growth factor 1(FGF-1) protein interactions at a single molecular level without any modifications. Understanding the structure and behavior of Heparin-FGF-1 complexes at the single molecular level is very important. An abnormality in their formation can lead to life-threatening conditions like tumor growth, fibrosis, and neurological disorders. Using a controlled dielectric breakdown pore fabrication approach, we have characterized individual heparin and FGF-1 (one of the 22 known FGFs in humans) proteins through the fabrication of 17 ± 1 nm nanopores. Compared to heparin, the positively charged heparin binding domains of some FGF-1 proteins translocated reacts with the pore walls, giving rise to distinguishable second peak with higher current blockade. Additionally, we have confirmed that the dynamic FGF-1 gets stabilized upon binding with heparin-FGF-1 at a single molecular level. The larger current blockades from the complexes relative to individual heparin and the FGF-1 recorded during the translocation ensure the binding of heparin-FGF-1 proteins, forming binding complexes with higher excluded volumes. Taken together, we demonstrate that solid-state nanopores can be employed to investigate the properties of individual proteins and their complex interactions, potentially paving the way for innovative medical therapies and advancements.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Fast immunofluorescence lateral flow test strip approach for detection of homocysteine

Wei Chen,Chaoman Ang,Doudou Lou,Yongxin Ji,Ling Huang,Yefei Zhu,Zhirui Guo,Ning Gu,Yu Zhang

DOI: https://doi.org/10.1049/mnl.2018.5040

2018-01-01

Micro & Nano Letters

Abstract:The study developed a novel quantitative detection method of homocysteine (Hcy), an independent risk factor for cardiovascular disease, based on an immunofluorescent test strip. The fluorescent nanospheres (F-NSs) were prepared by embedding fluorophores (Cy5) into poly(styrene-acrylate) copolymer nanospheres, then conjugated with streptavidin (SA) to obtain SA/F-NSs as a signal amplification label...
Superresolution Fluorescence Microscopy of Platelet Subcellular Structures as a Potential Tumor Liquid Biopsy

Peng Xu,Huan Deng,Zhenya Hong,Simei Zhong,Feifan Chen,Liangliang Wang,Zhenhao Wang,Yu Mei,Ziying Luo,Ziliang He,Haiwen Li,Chao Gan,Huaqiu Zhang,Yan Ma,Zhiqiang Han,Yu‐Hui Zhang

DOI: https://doi.org/10.1002/smtd.202300445

IF: 12.4

2023-06-24

Small Methods

Abstract:The work provides a promising novel type of platelet parameter, i.e., nanoscale distribution patterns of platelet subcellular structures imaged by structured illumination superresolution fluorescence microscopy, for tumor liquid biopsies at the subcellular level rather than the existing cellular or molecular level and open up new prospects for the clinical applications of superresolution imaging techniques. Blood‐based tumor liquid biopsies are promising as an alternative or complement to tissue biopsies due to their noninvasiveness, convenience, and safety, and there is still a great demand for the discovery of new biomarkers for these biopsies. Here, nanoscale distribution patterns of subcellular structures in platelets, as imaged by structured illumination superresolution fluorescence microscopy, as a new type of potential biomarker for tumor liquid biopsies are presented. A standardized protocol for platelet sample preparation and developed an automated high‐throughput image analysis workflow is established. The diagnostic capability based on the statistical analysis of 280 000 superresolution images of individual platelets from a variety of tumor patients, benign mass patients, and healthy volunteers (n = 206) is explored. These results suggest that the nanoscale distribution patterns of α‐granules in platelets have the potential to be biomarkers for several cancers, including glioma and cervical, endometrial, and ovarian cancers, facilitating not only diagnosis but also therapeutic monitoring. This study provides a promising novel type of platelet parameter for tumor liquid biopsies at the subcellular level rather than the existing cellular or molecular level and opens up a new avenue for clinical applications of superresolution imaging techniques.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Detection of α-Thrombin with Platelet Glycoprotein Ibα (GP1bα) for the Development of a Coagulation Marker

Doogie Oh,Yun Jin Chae,Jie Ying Teoh,Bora Yim,Dongwon Yoo,Yongdoo Park,Jongseong Kim

DOI: https://doi.org/10.1021/acsomega.4c00010

IF: 4.1

2024-03-26

ACS Omega

Abstract:The detection of prothrombotic markers is crucial for understanding thromboembolism and assessing the effectiveness of anticoagulant drugs. α-Thrombin is a marker that plays a critical role in the coagulation cascade process. However, the detection of this enzymatic molecule was hindered by the absence of an efficient modality in the clinical environment. Previously, we reported that one α-thrombin interacts with two α-chains of glycoprotein Ib (GPIbα), i.e., multivalent protein binding (MPB),...

chemistry, multidisciplinary
A surface-functionalized whole blood-based dielectric microsensor for assessment of clot firmness in a fibrinolytic environment

Sina Pourang,Dante Disharoon,Selvin Hernandez,Sanjay P Ahuja,Matthew D Neal,Michael A Suster,Anirban Sen Gupta,Pedram Mohseni

DOI: https://doi.org/10.1016/j.bios.2024.116789

2025-01-01

Abstract:Accurate assessment of fibrin clot stability can predict bleeding risk in coagulopathic conditions such as thrombocytopenia and hypofibrinogenemia. Hyperfibrinolysis - a clinical phenotype characterized by an accelerated breakdown of the fibrin clot - makes such assessments challenging by obfuscating the effect of hemostatic components including platelets or fibrinogen on clot stability. In this work, we present a biofunctionalized, microfluidic, label-free, electronic biosensor to elicit unique, specific, and differential responses from the multifactorial processes of blood coagulation and fibrinolysis ex vivo. The microsensor tracks the temporal variation in the normalized real part of the dielectric permittivity of whole blood (<10 μL) at 1 MHz as the sample coagulates within a three-dimensional, parallel-plate, capacitive sensing area. Surface biofunctionalization of the microsensor's electrodes with physisorption of tissue factor (TF) and aprotinin permits real-time assessment of the coagulation and fibrinolytic outcomes. We show that surface coating with TF and manual addition of TF result in a similar degree of acceleration of coagulation kinetics in human whole blood samples. We also show that surface coating with aprotinin and manual addition of aprotinin yield similar results in inhibiting tissue plasminogen activator (tPA)-induced upregulated fibrinolysis in human whole blood samples. Validated through a clinically relevant, complementary assay - rotational thromboelastometry for clot viscoelasticity - we finally establish that a microsensor dual-coated with both TF and aprotinin detects the hemostatic rescue in the tPA-induced hyperfibrinolytic profile of whole blood and the hemostatic dysfunction due to concurrent platelet depletion in the blood sample, thus featuring enhanced ability in evaluating complex, combinatorial coagulopathies.

Single-particle fibrinogen detection using platelet membrane-coated fluorescent polystyrene nanoparticles

Monitoring the Formation of Fibrin Clots as Part of the Coagulation Cascade Using Fluorescent Single-Walled Carbon Nanotubes

An optical nanofibre-enabled on-chip single-nanoparticle sensor

Coagulation-Inspired Direct Fibrinogen Assay Using Plasmonic Nanoparticles Functionalized with Red Blood Cell Membranes.

Interaction of fibrinogen-magnetic nanoparticle bioconjugates with integrin reconstituted into artificial membranes

Programming an Antibody-Peptide Sandwich Procedure for Selectivity and Ultrasensitive Detection of Fibrin Using Double-Stranded DNA (Dsdna) Hemp String Probe

A dual amplified gold nanoparticle‐based biosensor for ultrasensitive and selective detection of fibrin

A Highly Sensitive Fluorescence Turn-on Platform with Silver Nanoparticles Aptasening for Human Platelet-Derived Growth Factor-Bb

ADSORPTION OF FIBRINOGEN ON THE SURFACES OF BIOMATERIALS STUDIED BY USING SURFACE PLASMON RESONANCE (SPR) SENSOR

A Fibrin Site‐Specific Nanoprobe for Imaging Fibrin‐Rich Thrombi and Preventing Thrombus Formation in Venous Vessels

A two-step electrochemical biosensor based on Tetrazyme for the detection of fibrin

Human Fibrinogen Adsorption Onto Single-Walled Carbon Nanotube Films

Protein Adsorption and PEG Modification on the Surface of Single-walled Carbon Nanotubes Non-woven Film

Interfacial Interaction Between Human Fibrinogen And Polytetrafluoroethylene

CuO NWs boosted triboelectric microfluidic nanosensor functionalized by collagen-protein interactions for real-time platelet count monitoring

Rapid and sensitive detection of heart-type fatty acid binding protein using aggregation-induced emission nanoparticles on digital microfluidics workstation

Exploring Single Molecule Interactions: Heparin and FGF-1 Proteins Through Solid-State Nanopores

Fast immunofluorescence lateral flow test strip approach for detection of homocysteine

Superresolution Fluorescence Microscopy of Platelet Subcellular Structures as a Potential Tumor Liquid Biopsy

Detection of α-Thrombin with Platelet Glycoprotein Ibα (GP1bα) for the Development of a Coagulation Marker

A surface-functionalized whole blood-based dielectric microsensor for assessment of clot firmness in a fibrinolytic environment