Abstract:Results are presented on the fabrication and characterization of high critical temperature Josephson junctions in thin films of YBa2Cu3O7−δ produced by the process of focused electron-beam irradiation using 350 keV electrons. The junctions so produced have uniform spatial current densities, can be described in terms of the resistive shunted junction model, and their current densities can be tailored for a given operating temperature. The physical properties of the damaged barrier can be described as a superconducting material of either reduced or zero critical temperature (Tc), which has a length of ∼15 nm. The Tc reduction is caused primarily by oxygen Frenkel defects in the Cu–O planes. The large beam currents used in the fabrication of the junctions mean that the extent of the barrier is limited by the incident electron-beam diameter, rather than by scattering within the film. The properties of the barrier can be calculated using a superconductor/normal/superconductor (SNS) junction model with no boundary resistance. From the SNS model, we can predict the scaling of the critical current–resistance (IcRn) product and gain insight into the factors controlling the junction properties, Tc, and reproducibility. From the measured IcRn scaling data, we can predict the IcRn product of a junction at a given operating temperature with a given current density. IcRn products of ∼2 mV can be achieved at 4.2 K. The reproducibility of several junctions in a number of samples can be characterized by the ratio of the maximum-to-minimum critical currents on the same substrate of less than 1.4. Stability over several months has been demonstrated at room and refrigerator temperatures (297 and 281 K) for junctions that have been initially over damaged and then annealed at temperatures ∼380 K. Junctions manufactured using conventional lithography (0.5 μm wide) and which are suitable for digital electronics (Ic=500 μA at 40 K) can achieve IcRn products of 650 μV at 40 K. The production of 100 of these stabilized junctions could be accomplished in ∼4 h of irradiation time. The IcRn scaling also indicates that junctions suitable for high sensitivity superconducting quantum interference devices (Ic∼100 μA) can be made with IcRn products of ∼120 μV at 77 K.

Cold electron Josephson transistor

Josephson transistor and robust supercurrent enhancement with spin-split superconductors

High-performance electronic cooling with superconducting tunnel junctions

Control of Coulomb blockade in a mesoscopic Josephson junction using single electron tunneling

Coherent Josephson thermodynamic cycles

Magnetically-driven colossal supercurrent enhancement in InAs nanowire Josephson junctions

Efficient electronic cooling in heavily doped silicon by quasiparticle tunneling

Electrostatic field-driven supercurrent suppression in ionic-gated metallic Josephson nanotransistors

A cascade electronic refrigerator using superconducting tunnel junctions

Metallic supercurrent field-effect transistor

Quantum interference in a high-transition-temperature superconductor based on nanoslits on SrTiO3 substrate

Electron-beam damaged high-temperature superconductor Josephson junctions

Superconductor-quantum dot hybrid coolers

Long-range triplet Josephson current driven by the bias voltage

Phase-tunable thermoelectricity in a Josephson junction

Current Induced Hidden States in Josephson Junctions

Homointerface Planar Josephson Junction Based on Inverse Proximity Effect

Electronic Tunnelling in Superconductor/Quantum-Dot Josephson Junction Side-Coupled to Majorana Nanowire

Josephson Effect in Topological Semimetal-Superconductor Heterojunctions

Bipolar thermoelectric superconducting single-electron transistor

Unconventional Josephson Effect in Hybrid Superconductor-Topological Insulator Devices