Abstract:This paper studies a control algorithm for fuel cell/battery city buses. The output power of the fuel cell is controlled by a D.C. converter, and the output ports of the converter and the battery are connected in parallel to supply power for the electric motor. One way to prolong service life is to have the fuel cell system to deliver a steady-state power. However, because of fluctuations in the bus voltage and uncertainness in the D.C. converter, the output power of the fuel cell system changes drastically. A closed-loop control algorithm is necessary to eliminate the errors between the output and target power of the fuel cell system. The algorithm is composed of two parts, the feed forward one and the feedback one. Influences of the bus voltage and D.C. efficiency are compensated automatically in the feedback algorithm by using a PI algorithm. The stability and robustness of the algorithm is analyzed. Formulas for choosing suitable parameters are given considering both the transient process and the system stability. Experimental results show that, the stable relative error between the target power and the actual output power of the fuel cell system converges to zero. Because of signal noises introduced in the measurements of the current and the voltage, there are some noises in the actual output power. The average relative error (absolute value) during the measuring processes with the closed loop algorithm reduced to 1/3 of the level with the open loop algorithm, 1.5% and 4.5%, respectively. Based on the closed loop control algorithm proposed in this paper, a multi-objective optimal energy management strategy considering both of the fuel economy and system durability can be studied in the future.

Analysis and implementation of feedback linearisation controller for fuel cell-fed boost converter

Digital LQR Steady-State Optimal Control with Feedforward for Nonminimum Phase Boost DC-DC Converter

Design and control of bi-directional DC/DC converter for 30kW fuel cell power system

Control Lyapunov Function Based Control Strategy For Air Supply System Of Pem Fuel Cells

Feedback Linearization Control for the Receiving-Side Buck Converter of Dynamic Wireless Charging System of Electric Vehicles

Dual-Mode Lqr-Feedforward Optimal Control for Non-Minimum Phase Boost Converter

Design of Energy Management Control in Fuel Cell Power System

Feedback Linearization Control Of The Air Supply System Of Pem Fuel Cells

Feedback Linearization Based Air Pressure and Mass Flow Rate Regulation for PEMFCs

Extended State Observer-Based Control of DC–DC Converters for Fuel Cell Application

Rapid control prototype design of the DC/DC converter for Fuel Cell Electric Vehicles

Exploiting Monotonicity to Design an Adaptive PI Passivity-Based Controller for a Fuel-Cell System

Robust Adaptive Control of Interleaved Boost Converter for Fuel Cell Application

A new effective robust nonlinear controller based on PSO for interleaved DC–DC boost converters for fuel cell voltage regulation

Adaptive Feedback Control of Nonminimum Phase Boost Converter with Constant Power Load

Implementation of Non-Isolated High Gain Interleaved DC-DC Converter for Fuel Cell Electric Vehicle Using ANN-Based MPPT Controller

Extended Feedback Linearisation Control of Non-ideal DCDC Buck Converter in Continuous-conduction Mode

Performance evaluation of fuel cell based on a DC-DC boost converter through optimized MPPT controller

Closed Loop Control Algorithm of Fuel Cell Output Power for A City Bus

Objective holographic feedbacks linearization control for boost converter with constant power load

Robust Voltage Control of Floating Interleaved Boost Converter for Fuel Cell Systems