Experimental investigation on the characteristics of tire wear particles under different non-vehicle operating parameters

Xiang-dong Chang,Hai-bo Huang,Run-nan Jiao,Jin-peng Liu

DOI: https://doi.org/10.1016/j.triboint.2020.106354

IF: 5.62

2020-10-01

Tribology International

Abstract:<p>Tire wear particles are an important non-exhaust contributor of urban particulate matter, which could cause environmental pollution and threaten human health. In this paper, tire-road rolling wear experiments were carried out using a self-made test rig. The size distribution and generation mechanism of wear particles under different non-vehicle operating parameters (treadwear, road roughness and relative humidity) were investigated. The results show that the size of the tire wear particles is an approximately normal distribution in most cases, and tires with good wear resistance produce fewer particles. The quantity of fine particles (&lt;10 μm) is much higher under water lubricating. Temperature has a strong influence on the particle size and even changes the wear mechanism. The high temperature increases the probability of large particles. Additionally, high temperature produces more tire wear particles and further increases the surface wear during the rapid rise of the tread temperature. The major wear mechanisms of the tire rubber are abrasive wear and fatigue wear, which significantly influence the particle size. Furthermore, this study can provide basic data for the reduction of the secondary hazards of tire wear particles.</p>

engineering, mechanical

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to explore the influence of different non - vehicle operating parameters (such as tread wear, road surface roughness and relative humidity) on the characteristics of tire wear particles. Specifically, the research aims to experimentally investigate how these parameters affect the size distribution and generation mechanism of tire wear particles. This helps to better control the generation of harmful tire wear particles and reduce their secondary harm to the environment and human health.

The key points mentioned in the paper include:
- **Research background**: Tire wear particles are an important part of non - exhaust source urban particulate matter, which may cause environmental pollution and pose a threat to human health, especially the impact on the lungs and heart. Therefore, understanding and controlling the size of tire wear particles is of great significance for reducing their harm.
- **Research method**: Use a self - made test device to conduct tire - road rolling wear experiments, collect tire wear particles under different conditions, and analyze their size distribution and morphological characteristics through an optical microscope and a scanning electron microscope (SEM).
- **Main findings**:
- The size of tire wear particles is approximately normally distributed in most cases, and tires with good wear resistance produce fewer particles.
- The number of fine particles (< 10 μm) significantly increases under water - lubricated conditions, and temperature has a significant impact on particle size. High temperature will increase the probability of generating large particles.
- High temperature not only increases the number of tire wear particles but also further aggravates surface wear when the tread temperature rises rapidly.
- The main wear mechanisms of tire rubber are abrasive wear and fatigue wear, and these two mechanisms significantly affect the particle size.

Through these research results, the author hopes to provide basic data for reducing the secondary harm of tire wear particles, thereby ensuring the safe use of tires.