Abstract:Aqueous zinc-ion batteries (ZIBs) are considered as a promising energy storage system due to their low cost and high safety merits. However, they suffer from the challenge of uncontrollable dendrite growth due to a non-uniform zinc deposition, which increases internal resistance and causes battery failure. Herein, Ag coating fabricated by a facile surface chemistry route on zinc metal was developed to guide uniform zinc deposition. Ag-coated Zn shows improved electrolyte wettability, a small zinc deposition overpotential, and fast kinetics for zinc deposition/dissolution. Direct optical visualization and scanning electron microscopy images show uniform zinc deposition due to the introduction of Ag coating. As a result, the Ag-coated Zn anode can sustain up to 1450 h of repeated plating/stripping with a low overpotential in symmetric cells at a current density of 0.2 mA cm–2, while an improved performance is realized for full cells paired with a V2O5-based cathode. This work provides a facile and effective approach to improve the electrochemical performance of ZIBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22911?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22911</a>.SEM image and elemental mapping of the Ag-Zn electrode, reference XRD patterns, discharge/charge profiles of Zn//Zn symmetric cells at different current densities at selected cycles, cycling performance of symmetric cells at a current density of 5 and 10 mA cm–2, comparison of the performance of the symmetric cells with the recent literature on various Zn metal protective strategies, cycling performance of symmetric cells based on Zn foil with 25 μm thickness at a current density of 1 and 2 mA cm–2, DOD levels of symmetric cells, XRD pattern of Ag-Zn after one cycle and reference XRD patterns, Nyquist plot of symmetric Zn and Ag-Zn cells, schematic set-up for in situ microscopy for Zn deposition, SEM images after different cycles at different current densities, XRD pattern of Ag-Zn after 30 cycles, FTIR spectra of the V2O5-PEDOT composite, XRD pattern of the V2O5-PEDOT composite, SEM image of the V2O5-PEDOT composite, charge/discharge curves of Zn//V2O5-PEDOT at different current densities, and charge/discharge curves of Zn//V2O5-PEDOT at different cycles at 5 A g–1 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22911/suppl_file/am0c22911_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Unveiling the Origin of Alloy-Seeded and Nondendritic Growth of Zn for Rechargeable Aqueous Zn Batteries

A Homogeneous Plating/stripping Mode with Fine Grains for Highly Reversible Zn Anodes

Understanding and Controlling the Nucleation and Growth of Zn Electrodeposits for Aqueous Zinc-Ion Batteries

Uniform Zn Deposition Achieved by Ag Coating for Improved Aqueous Zinc-Ion Batteries

Nucleophilic Interfacial Layer Enables Stable Zn Anodes for Aqueous Zn Batteries

Manipulating Uniform Nucleation to Achieve Dendrite-Free Zn Anodes for Aqueous Zn-Ion Batteries

Zincophilic Cu Sites Induce Dendrite‐Free Zn Anodes for Robust Alkaline/Neutral Aqueous Batteries

Tuning Surface Energy of Zn Anodes via Sn Heteroatom Doping Enabled by a Codeposition for Ultralong Life Span Dendrite-Free Aqueous Zn-Ion Batteries

Alloying strategy to stabilize monocrystalline zinc anode under high utilization and working capacity

Liquid Alloy Interlayer for Aqueous Zinc-Ion Battery

Regulating "Tip Effect" and Zn2+‐Deposition Kinetics by In Situ Constructing Interphase for Low Voltage Hysteresis and Dendrite‐Free Zn Anode

Zincophilic and Low-Active Metallic Particles-Induced Alloying/dealloying Behavior for High-Performance Aqueous Zinc Metal Batteries

Revealing the origin of dendritic deposition regulated solid electrolyte interphase enabled by cation receptor in Zn-ion batteries

Suppressing Side Reaction and Dendritic Growth Via Interfacial Cyclization Molecule for Stable Zn Metal Anodes

Unveiling the Mechanism of the Dendrite Nucleation and Growth in Aqueous Zinc Ion Batteries

Utilizing Gradient Oxidized Alloys to Establish a Highly Stable Interfacial Chemical Environment for Aqueous Zinc‐ion Batteries

Surface Transformation Enables Dendrite‐free Zinc Metal Anode in Nonaqueous Electrolyte

Regulating Zinc Nucleation Sites and Electric Field Distribution to Achieve High-Performance Zinc Metal Anode via Surface Texturing.

Achieving Ultrahigh‐Rate Planar and Dendrite‐Free Zinc Electroplating for Aqueous Zinc Battery Anodes

Suppressing Zn dendrite growth by molecular layer deposition to enable long-life and deeply rechargeable aqueous Zn anodes

Deeply Rechargeable and Hydrogen-Evolution-Suppressing Zinc Anode in Alkaline Aqueous Electrolyte