Abstract:Propose crosslink mechanism of XNBR with PCDI. Carboxylated nitrile rubber (XNBR) gloves with sulfur crosslinked system consist of accelerators that pose a Type IV allergies problem with a risk to harm the health of the user. Alternative crosslinking system such as accelerator‐free (AF) crosslinker has been found and established to combat the health issues as replacement to the conventional crosslinker. This work emphasized the use of polycarbodiimide (PCDI) as a crosslinker, particularly PCDI with zinc oxide (ZnO) crosslink system. The effectiveness of PCDI as an AF crosslinker was compared with two conventional crosslink systems: sulfur with ZnO and ZnO only system. The swelling test results show the crosslink density of PCDI crosslink system achieved comparable value with conventional systems. It is expected that XNBR gloves with PCDI imposed superior mechanical and physical properties as sulfur system due to the formation of ionic crosslink resulting in much denser polymer network. The new PCDI crosslinker system offer cost reduction to gloves manufacturer as it can be cured at low temperatures from 60 to 80°C comparing to sulfur crosslinked system that normally cured at 140°C. PCDI offered a new generation of AF crosslinker in XNBR gloves with lower curing temperatures and to tackle health hazards, in place of the conventional crosslinker. Highlights Emphasizes a significant change or improvement in the field of hand protection. Suggests that polycarbodiimide possesses distinctive qualities that set it apart from other materials. Highlights polycarbodiimide's effectiveness as a crosslinker without the need for accelerators, which are commonly used in rubber processing Indicates a novel approach to processing rubber gloves, potentially reducing energy consumption or enabling new applications. Specifies the type of gloves being discussed, indicating a focus on a specific material or product.

Revealing the unique characteristics and strength of polycarbodiimide as an accelerator‐free crosslinker for low‐temperature processing of carboxylated nitrile butadiene rubber gloves for hand protection

A Facile and Environmentally Friendly Approach to Fabricate Hybrid Crosslinked Nitrile Butadiene Rubber with Comprehensively Improved Mechanical Performances by Incorporating Sacrificial Ionic Bonds

Dual cross‐linking of XNBR latex with epoxy‐functional calcium silicate particles for the production of accelerator‐free medical gloves

Thermally Reversible Cross-linkers to Facilitate the Improved Reprocessability of Poly(butyl Methanol Methacrylate) Rubber with Excellent Thermal and Mechanical Properties

Sustainable Recycling of Waste from Nitrile Gloves: Prolonging the Life Span by Designing Proper Curing Systems

Nanokaolin reinforced carboxylated nitrile butadiene rubber/polyurethane blend-based latex with enhanced tensile properties and chemical resistance

Catalyst-free curing and closed-loop recycling of carboxylated functionalized rubber by a green crosslinking strategy

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

Dynamically photocrosslinking of polypropylene/EPDM blends as a thermoplastic elastomer

Effects of Dynamic Crosslinking on Crystallization, Structure and Mechanical Property of Ethylene-Octene Elastomer/EPDM Blends

Enhanced Irradiation Self-Crosslinking and Co-Crosslinking with Nitrile Rubber of Poly(Vinyl Chloride) with Pendent N,N-Diethyldithiocarbamate Groups

Cross-Linking Characteristics, Morphology, Dynamics, and Mechanical and Thermal Properties of Polychloroprene/Polybutadiene/Nano-Zinc (CR/BR/nZn) Compositions with Reduced Fire Hazard

Promoted Strain-Induced Crystallization of Cis-1, 4-Polyisoprene with Functional Carbon Nanodots

Poly(acrylonitrile-co-butadiene) as polymeric crosslinking accelerator for sulphur network formation

The effect of cross-linking system and reinforcement on the cross-linking reaction of peroxide vulcanized ethylene-propylene-diene terpolymer (EPDM) matrix

Simultaneously Achieving Excellent Heat Aging Resistance and Grip Performance in Carbon Black/Glass Flake/EPDM Rubber Composite for Overhead Line Spacers

Introducing Mechanochemistry into Rubber Processing: Green-Functionalized Cross-Linking Network of Butadiene Elastomer

Interface Coupling in Rubber/Carbon Black Composites toward Superior Energy-Saving Capability Enabled by Amino-Functionalized Polysulfide

Investigating the Effect of Nano-Crystalline Cellulose in Nitrile Butadiene Rubber Matrix for Improved Thermo-Mechanical Properties

Mechanical properties and structural characteristics of dynamically photocrosslinked PP/EPDM blends

Cure kinetics and morphology of natural rubber reinforced by the in situ polymerization of zinc dimethacrylate