Abstract:The process of engineering construction typically impacts the nearby existing buildings, causing either localized or widespread deformation of these structures. The application of deformation monitoring technology enables the timely identification of damage or uneven deformation, thereby facilitating the implementation of appropriate maintenance and repair actions. This paper explores the application of ground-based synthetic aperture radar (GB-SAR) in building facade deformation monitoring. GB-SAR acquires two-dimensional (2D) images and measures deformation along the line of sight (LOS) direction through interference calculation. In order to accurately determine the location of deformation and retrieve the elevation information of image pixels, it is usually required to utilize external three-dimensional (3D) data to reconstruct the 3D coordinate of these pixels, which is known as geocoding, or georeferencing. In the case of the GB-SAR system, it is necessary for the observer to measure the angles between the antenna orientation, the radar movement direction and the reference plane of the local surveying coordinate system. Nevertheless, the measurement of these attitude angles may be overlooked in practice, and the impact of small attitude angles or their measurement errors on GB-SAR geocoding may be disregarded, which directly affects the slant range projection (SRP) calculation of the external 3D data, thereby leading to biased 3D coordinate reconstruction of GB-SAR pixels. This paper proposes a method to calculate the SRP coordinates of point cloud data considering the attitude inclination angles of radar sensor, and perform matching calculations on the high-quality pixels (HQPs) with the point cloud after SRP to extract building facade deformation. The results demonstrate that the method is capable of effectively mitigating the influence of the radar attitude inclination angles, resulting in a reduction of the average deviation of 3D coordinates to approximately one-third of the value without consideration of the sensor's attitude in a real-world building monitoring experiment.

Deformation extraction of building facade using ground-based interferometric synthetic aperture radar assisted by 3D laser scanning technology

GB-SAR geocoding considering the radar attitude inclination angles for building facade deformation extraction

Design of 3D Laser Radar Based on Laser Triangulation

Integrated Ground-Based SAR Interferometry, Terrestrial Laser Scanner, and Corner Reflector Deformation Experiments

Two-Dimensional Deformation Measurement Based on Multiple Aperture Interferometry in GB-SAR

Airborne Circular Flight Array SAR 3D Imaging Algorithm of Buildings Based on Layered Phase Compensation in the Wavenumber Domain

A Three-Dimensional Deformation Monitoring Method: Combining Optical Deformation Monitoring Based on Regression Models and GB-SAR Interferometry

Radargrammetric 3D Imaging through Composite Registration Method Using Multi-Aspect Synthetic Aperture Radar Imagery

Geometric constraints based 3D reconstruction method of tomographic SAR for buildings

A Performance Analysis of Typical Imaging Algorithms in Ground-Based Synthetic Aperture Radar

ScanSAR Interferometric Processing Using Existing Standard InSAR Software for Measuring Large Scale Land Deformation

Error Analysis and 3D Reconstruction Using Airborne Array InSAR Images

Reconstructing 2-D/3-D Building Shapes from Spaceborne Tomographic Synthetic Aperture Radar Data

Interferometric Phase Error Analysis and Compensation in GNSS-InSAR: A Case Study of Structural Monitoring

GB-ArcSAR Imaging Based on Optimized Construction of Reference Plane

Three Dimensional Surface Reconstruction with Multistatic SAR.

Ground-Based SAR Wide View Angle Full-Field Imaging Algorithm Based on Keystone Formatting

Time- and Space-Varying Atmospheric Phase Correction in Discontinuous Ground-Based Synthetic Aperture Radar Deformation Monitoring

Interferometric DEM-Assisted High Precision Imaging Method for ArcSAR

A Sparse Reconstruction And Fusion Technique For Building Footprint Extraction From Multi-Aspect High-Resolution Sar Data

3D Reconstruction of Building Facade with Fused Data of Terrestrial Lidar Data and Optical Image