Abstract:Due to ageing of the bridge stock, continuously increasing load requirements, the need for assessing existing bridges is becoming increasingly important. Reinforced concrete (RC) bridge deck slabs are among the most critical parts to the load carrying capacity of bridges. Previous research indicated that the assessment method used in current practice largely underestimate the load-carrying capacity. The objective of the study reported in this licentiate thesis is to develop and calibrate improved methods for assessment of load-carrying capacity and response of existing bridge deck slabs. This study proposes an enhanced assessment through improved structural analysis and resistance evaluation in order to achieve higher detectable load-carrying capacity. To achieve this objective, the scientific approaches including literature study, laboratory tests, analytical analyses and finite element analyses were adopted. Two major studies and a series with supporting tests were conducted as following: A large test series, in which three specimens containing traditional steel bar reinforcement in ordinary concrete, were carried out to study the load carrying capacity and structural behavior of two-way slab. A proposed multi-level assessment method was validated through two case studies: a two-way slab and a cantilever slab. The multi-level assessment method includes simplified analysis, 3D linear FE analysis, 3D nonlinear analysis with shell elements, 3D nonlinear FE analysis with continuum elements include fully bonded reinforcement as well as 3D nonlinear FE analysis with continuum elements including bond-slip for the reinforcement. To develop the modeling strategies for two-way RC slabs with continuum elements, parameter studies has been carried out to investigate the influence of different modeling choices. Parameters including finite element properties, modeling of concrete, modeling of reinforcement and stiffness of supports were varied in different comparative models to investigate the influence. The study shows that existing methods currently used in assessment are not able to accurately reflect the response of RC bridge deck slabs, and underestimate their capacity. With enhanced assessment methods, such as the nonlinear finite element method, it is possible to better reflect the structural behavior, and more accurately determine the load carrying capacity. Two case studies have proven that the multi-level assessment method is able to reflect the structural behavior at different levels of approximation, which is beneficial in evaluating existing RC slabs. The parameter studies indicate that modeling choices such as geometric nonlinearity, crack bandwidth and Poisson’s ratio have significant impact on determination of the load-carrying capacity. Finite element properties, reinforcement model and stiffness of supports influence crack pattern and load distribution respectively.

Transfer from defective bridge information model to defect analysis model based on industry foundation classes

Structural Analysis of Existing RC Bridge Deck Slabs Structural Analysis of Existing RC Bridge Deck Slabs

Experimental Study and Numerical Analysis of A Composite Bridge Structure

A Parameter-Driven Method for Modeling Bridge Defects through IFC

Performance Monitoring of Damaged Bridge Members Strengthened with Carbon Fiber Reinforced Polymer

Application of Adaptive Neuro-Fuzzy Inference System in Bridge Condition State Evaluation

Repair and Strengthening Assessment of Existing Bridges Based on Time-Dependent Reliability Analysis

The Model for Predicting the Remaining Service Life of Reinforced Concrete Bridges In-Service and Applicability

Improved bridge capacity rating methods based on system reliability assessment

Prediction of service performance for RC bridge by considering the coupling effect of load-environment in service cycle

Method for evaluating durability of existing concrete bridges structures

An improved model for assessment of the durability of existing reinforced concrete bridges

Maintenance strategy of highway bridges based on life cycle function

Research on Evaluation System of Bridge Disaster Resilience

Structural condition assessment of a bridge pier: A case study using experimental modal analysis and finite element model updating

Bridge maintenance management based on routine inspection data: a quantitative approach

Artificial Intelligence Based Structural Assessment for Regional Short- and Medium-Span Concrete Beam Bridges with Inspection Information

MULTI-SCALE MODELING AND ANALYSES ON STRUCTURAL DETERIORATION AND DAMAGE IN LONG-SPAN BRIDGES AND ITS APPLICATION

An Intelligent Bridge Management and Maintenance Model Using BIM Technology

Development of a BIM-based bridge maintenance system (BMS) for managing defect data

A global framework for data-informed bridge examination